Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[gianluca]

Sorry Gianluca if I reply a your post but I have also installe it on a vanilla and SAS 2.3 and all work fine!

Try again with the correct iter:

4.08m + 4.09m + SAS modactivator 2.3 and then install only this one and the wide screen!

cheers

walter

hi walter, as stated there in SAS "essentials" thread, UP users should not use SAS modact 2.3 but the dedicated SAS modact 4 Up users and that is exactly what I did.
Of course my UP vanilla install refers to a 1946 (from dvd) install patched to 4.09m version and then patched directly to UP 2.01.
I can confirm that I tried this mod with only "SAS modact 4 UP" in the mods folder having activated via JSGME only wide screen.
Whenever I enable MisssionCombo there I get this memory error, after disabling the map shows normally.....
That's a mistery really!

[X-Raptor]

@Benitomuso:
Hi m8, 1st I want congrats with you for the all good work you hare making for all community. However i have a little problem : my game (U.P.2.1) have these feaures of your work:

1- Last version of 00_PALMissionProCombo --in GME (activated)
2- Last Version of 00_MissionProPAL -- in GME (activated)
3- Last Vesrion of 00_FMBPlus-- in GME (activated)
4- Last Version QMBProPAL -- in MODS folder

and,
a) I can manage my flight, plane, armament  in SINGLE MISSION
b) I can Fly all maps in QMBPro where I removed "//" in Quicks/QMBMaps.ini text file
BUT--
I don't have ANY F.M.B. button in QMBPro as picture below show.
Please if you can explain me what is my mistake?


 

[benitomuso]

X- Raptor,

                your issue is easy to identify and has a clear solution.

  First: the combo I released lately involves all the other MODs, so you should disable the QMBProPAL, the MissionPro and the FMBPlus, because it has more recent (and expanded versions) of all the three. Because of the fact that you have the QMBProPAL in the MODS folder, it overwrites the GME Combo and you get the old version.

  My personal suggestion:

 1-deactivate all my 3 MODs you have activated through GME
 2-remove the QMBProPAL folder from MODS
 3-copy the 00_PALMissionProCombo to MODS

  In this way everything should work properly.

  Regards,
                      Pablo

[_AUS_Salmo]

... disable the QMBProPAL, the MissionPro and the FMBPlus, because it has more recent (and expanded versions) of all the three. ... Pablo

Can you explain how FMBPlus has been expanded?

[benitomuso]

Sure Salmo:

     to make it accesible from the Briefing window or from the QMB window, there wasn't any procedure to open a specific file. So I had to implement kind of an OpenFile function that can be accessed from another class and allow these other screens to transfer the control to the FMB.

  Another thing, as I detail in the original post, was the addition of the mousewheel when you edit missions, something which is very useful.

  Regards,
                       Pablo

[X-Raptor]

X- Raptor,

                your issue is easy to identify and has a clear solution.

  First: the combo I released lately involves all the other MODs, so you should disable the QMBProPAL, the MissionPro and the FMBPlus, because it has more recent (and expanded versions) of all the three. Because of the fact that you have the QMBProPAL in the MODS folder, it overwrites the GME Combo and you get the old version.

  My personal suggestion:

 1-deactivate all my 3 MODs you have activated through GME
 2-remove the QMBProPAL folder from MODS
 3-copy the 00_PALMissionProCombo to MODS

  In this way everything should work properly.

  Regards,
                      Pablo

Hi Pablo, thank you for your help, then as per your suggestion now I have only QMBProCombo in "MODS" folder and disabled all the rest: but result is partially ok because I have QMB + F.M.B. button  (ok:) and when I click in F.M.B. I have the map corresponding (ok again..) but here are shown completely other models of planes, not the ones I selected originally in the Q.M.B. rectangular boxes, this for all (allied and axis) ones  ??? any advice?

[benitomuso]

Hi Pablo, thank you for your help, then as per your suggestion now I have only QMBProCombo in "MODS" folder and disabled all the rest: but result is partially ok because I have QMB + F.M.B. button  (ok:) and when I click in F.M.B. I have the map corresponding (ok again..) but here are shown completely other models of planes, not the ones I selected originally in the Q.M.B. rectangular boxes, this for all (allied and axis) ones  ??? any advice?

That's absolutely normal. The QMB missions are kind of templates where the air actors (the planes) of those missions you see are replaced by the airplanes you select in the QMB screen.

I strongly suggest you to read the thread that CirX created regarding the subject:

https://www.sas1946.com/main/index.php/topic,2331.0.html

A wrap up of the whole picture: don't worry about the planes used in the mission when you are editing it in FMB. Just use the most standard and representative (stock planes not MODded ones), and the only important thing are the paths of flight and the targets. All the rest will be overwritten dynamically by QMB.

Regards,
                   Pablo

[gianluca]

hi Pablo and you all guys!
just to inform but it's not so terrible at the end, I have several UP installs on my machine and starting from today another install on another machine...
so I tried starting all over again, let's call it an experiment!
first 1946 from DVD, then pathed up to 4.08, flown a mission; second patched up to 4.09m, 4.09m skins and flown a mission.
third installed UP 2.01, updated through restore&update function, started the game and I could open the B28alley map; finally created MODS and within "SAS modact 4 UP users" and MissionCombo.
So totally new install on a new computer and the same result: MissionCombo installed and no B29Alley map!
What is left now is downloading again UP files and try again, maybe a corrupted files?
Mah... ok it's time to enjoy this week-end!
of course Pablo I find this mod super and I thk you for all your superb work here!
best regards,
Gianluca

[X-Raptor]

 Thank you Pablo for your prompt response. You have made really a goood work!. Hope only one day we'll see corrects plane also in the FMB layout..just for complete your big improvement;). Cheers.

[PO_MAK_249RIP]

Thanks Malone i'd never heard of QOT just thought he'd mispelled it !! Is it useful ??

[SAS~Malone]

yes, quite useful for FMB fanatics, otherwise not really...
similar to group cloner, or Monkey Wrench, have a look at this Ubi thread for details: http://forums.ubi.com/eve/forums/a/tpc/f/50910533/m/9291072325

[OberstDanjeje]

Gianluca, I have UP2.01, MissionCombo and no problem opening B29Alley.
Looks like you are the only one.
Anyway using UP2.01 restore&update you should have a perfect copy of the game, so no need to downloading it again.
I must admit the yours is a strange problem.