Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[101tfs]

https://www.mediafire.com/file/bqufwhnmmk9qs2s/D521-ALA.7z/file
https://www.mediafire.com/file/529h7vas03vk927/D521-ALA%2528fr%2529.7z/file

[Gaston]

Thanks ! But what is the difference between the 2 downloads ? Do they need to be installed together ?

[erafitti]

Thanks ! But what is the difference between the 2 downloads ? Do they need to be installed together ?

I interpret that yes, it is the same model, the version for France and the other Multi for non-French users.

Un saludo.

[Gaston]

OK. Thanks.

[Frankiek]

It may be but as it stands the two folders are in alternative as they are both called D521-ALA(Multi1).  If you would like to use them together then you would need to change the plane class and the the french version folder should be denominated D521-ALA(fr).

[Gaston]

Thanks for explanations. It is a very good alternative to replace the old Frankemplane. I like this solution.

[Frankiek]

It is to be noted that there was only one prototype that was assembled as D-521 and even this one after the preliminary tests showed unsatisfactory results was reconverted to D-520 with the Hispano-Suiza engine

[Vasya]

Tell me please!
Why did the collisions of the radiator and oil cooler disappear?
Trying to bring collisions from glider to class
to the protected void hitBone section.
Original collisions from 3D glider D-520:

Code: [Select]

[CF_D0]
Mesh CF_D0
Parent _ROOT_
Attaching 1 1.19249e-008 0 -1.19249e-008 1 0 0 0 1 -1.61096 8.34465e-007 0.48813
CollisionObject xcf1
CollisionObject xcf2
CollisionObject xcf3
CollisionObject .xxarmorp1
CollisionObject .xxeng1oil
CollisionObject .xxeng1radtr
CollisionObject .xxtank1
[Tank1_D0]
Mesh Tank1_D0
Parent CF_D0
Attaching -1 -3.17865e-008 0 -1.38943e-015 4.37114e-008 1 -3.17865e-008 1 -4.37114e-008 1.10815 -8.69658e-007 -0.0870415
CollisionObject .xxInstrumC1
CollisionObject .xxInstrumC2
CollisionObject .xxInstrumL1
CollisionObject .xxInstrumR1
CollisionObject .xxInstrumR2
CollisionObject .xxInstrumG1
[CF_D1]
Mesh CF_D1
Parent CF_D0
Hidden
Attaching 1 0 0 0 1 0 0 0 1 9.95089e-015 -2.46309e-014 0
CollisionObject xcf1
CollisionObject xcf2
CollisionObject xcf3
CollisionObject .xxarmorp1
CollisionObject .xxeng1oil
CollisionObject .xxeng1radtr
CollisionObject .xxtank1
[CF_D2]
Mesh CF_D2
Parent CF_D0
Hidden
Attaching 1 0 0 0 1 0 0 0 1 9.95089e-015 -2.46309e-014 0
CollisionObject xcf1
CollisionObject xcf2
CollisionObject xcf3
CollisionObject .xxarmorp1
CollisionObject .xxeng1oil
CollisionObject .xxeng1radtr
CollisionObject .xxtank1
[Blister1_D0]
Mesh Blister1_D0
Parent CF_D0
Separable
Attaching 1.94707e-007 1 0 -0.99863 1.9444e-007 -0.0523361 -0.0523361 1.01902e-008 0.99863 -0.239552 2.86103e-007 0.509073
[Antenna_D0]
Mesh Antenna_D0
Parent CF_D0
Separable
Attaching 1 0 0 0 1 0 0 0 1 -0.486001 9.53675e-008 -0.75313
[Engine1_D0]
Mesh Engine1_D0
Parent CF_D0
Separable
Attaching 1 1.19209e-007 0 -1.19209e-007 1 0 0 0 1 2.85204 3.8147e-007 -0.22491
CollisionObject xengine1
CollisionObject .xxeng1case1
CollisionObject .xxeng1case2
CollisionObject .xxeng1cyls1
CollisionObject .xxeng1cyls2
CollisionObject .xxeng1eqpt1
CollisionObject .xxmgun01
And for some reason, now there are already 3 machine guns in the engine. 

Code: [Select]

[Engine1_D0]
Mesh Engine1_D0
Parent CF_D0
Separable
Attaching 1 1.19209e-007 0 -1.19209e-007 1 0 0 0 1 2.85204 3.8147e-007 -0.22491
CollisionObject xengine1
CollisionObject .xxeng1case
CollisionObject .xxeng1cyl1
CollisionObject .xxeng1cyl2
CollisionObject .xxmgun01
CollisionObject .xxmgun02
CollisionObject .xxmgun03


[SAS~Storebror]

Talking about collision boxes... the flaps don't seem to have any, the ailerons have too small ones, and the fr's right wing center collision box looks like its got inverted coords:






Mike

[Vasya]

Talking about collision boxes... the flaps don't seem to have any, the ailerons have too small ones, and the fr's right wing center collision box looks like its got inverted coords:
..................

Mike

I think it's easier to substitute the original D-520 airframe without alteration, and enter the collision code from the class into the D521_ALA class
D520xyz.
Because the proposed airframe needs to be seriously modified.
Airframe collisions D521_ALA do not coincide with the MS400X class either. D521_ALA is assigned to this class in BAT.

[Vasya]

I already have a D521_ALA flying with a new glider.
Native motor - Merlin-3.
It remains to adjust the trimming.
https://drive.google.com/file/d/1Iiw6PlQ9ly59QIDKE2LDo20BRVFx4hgV/view?usp=sharing

[Vasya]

D-521 with D-520 airframe from patch 4.15.
Own fm and motor Merlin-3.
Small arms are French (there is inside the archive).
The class is adapted to the D-520 glider from patch 4.15.
The cockpit is also French.
Have a nice flight!
Link to archive:
https://drive.google.com/file/d/1QpndVk6x06KCfnotkqzBi6BWV7mYQVYw/view?usp=sharing