Special Aircraft Service

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: UP3 RC04 Screen Resolution  (Read 4789 times)

0 Members and 1 Guest are viewing this topic.

Freddio

  • member
  • Offline Offline
  • Posts: 2
UP3 RC04 Screen Resolution
« on: January 27, 2017, 09:41:02 PM »

Hopefully there are a few good peeps out there who will be able the resolve this problem with UP3 RC04 with patch pack 107 or 202 I have taken a clean IL2 1946 and patched it up to 4.13.2 checked the patched version 4.13.2 and no problems able to get game to run on a resolution of 1920x1080 which is the native resolution of my screen.
I then install all the UP3 files as required then the RC04 and finish them all off with the 202 patch. I run the JSGME to activate the UP3 mod then the 202 patch close the JSGME and open the IL2 selector to start the UP3 or later MOD Enabler hit start IL2 ---- a splash screen appears saying UP3 RC04 with 202 patch the game loads and the max screen resolution reverts back to prehistoric resolution of 1280x960 I have changed the config file to the resolution I want to use but the game (when UP3 is enabled) will not allow my native resolution.
 I would be very grateful if someone has an answer.

 Many thank Freddio.
Logged

SAS~Storebror

  • Editor
  • member
  • Offline Offline
  • Posts: 23561
  • Taking a timeout
    • STFU
Re: UP3 RC04 Screen Resolution
« Reply #1 on: January 28, 2017, 12:43:43 AM »

Hi Freddio and welcome to SAS ;)

Our good old Ultrapack dates back to the times when IL-2 didn't support widescreen resolutions per default, but it's quite easy to get there.
To get the game to run in your native solution, please open the file "conf.ini" from your UP3 game folder and adjust the following values from the "[window]" section which should be more or less at the beginning of that file:
Code: [Select]
width=1920
height=1080
FullScreen=1
ChangeScreenRes=1
ColourBits=32
DepthBits=24
StencilBits=8
DrawIfNotFocused=1
EnableResize=0
EnableClose=1
SaveAspect=0
Use3Renders=0

You cannot choose these values from the ingame menu, that's why you have to do it manually in conf.ini.
This will let your game start in your monitor's native resolution, however all menues will still show up in 4:3 format.
To fix this, please download and install the "Ecran Wide" mod for IL-2 4.10.1:
https://www.mediafire.com/file/16uscdzm1z41axy/Ecran_Wide_4101.7z

Note that even if UP3 offers "WideScreenSupport" and other nice sounding features in JSGME, you must not enable these as they're outdated and will ruin your game.
Don't use "#UP#_Enable_Hakenkreuz", "#UP#_Enable_WideScreenSupport" or "#UP#_Enable_Hakenkreuz&WideScreenSupport", only choose "#UP#_Enable_UP3.0" and use Ecran Wide mod for Widescreen Support, Hakenkreuz enabler is included in the Patch Pack.

Best regards - Mike
Logged
Don't split your mentality without thinking twice.

Freddio

  • member
  • Offline Offline
  • Posts: 2
Re: UP3 RC04 Screen Resolution
« Reply #2 on: January 31, 2017, 01:28:29 PM »

Hi Mike,

 Thanks for your reply and yes at last I'm up and away with full screen fly-ability  ;D
Looking forward to enjoying the views from my cockpit.

Many thanks for your warm welcome and help

~S~
Freddio
Logged

SAS~Storebror

  • Editor
  • member
  • Offline Offline
  • Posts: 23561
  • Taking a timeout
    • STFU
Re: UP3 RC04 Screen Resolution
« Reply #3 on: January 31, 2017, 01:44:57 PM »

My pleasure Freddio, my pleasure ;)
Have a good time, see you in the skies and remember to watch you six!

Best regards - Mike
Logged
Don't split your mentality without thinking twice.

robert31178

  • member
  • Offline Offline
  • Posts: 113
Re: UP3 RC04 Screen Resolution
« Reply #4 on: May 18, 2017, 12:42:44 PM »

Mike,

I was wondering if you could help me out. I put my VP mods conf.ini into my new UP3 install not realizing that it would be totally different (been playing for years but new to "hot rodding" the game. Would it be possible for you to load up your whole conf.ini here for me to copy and paste, overwriting the dumb whatever I have done?

The reason I think something is wrong is because I have no chat bar and no map. I tried the Ecran mod and it didn't change anything for me, or so it seems. The only other JSGME mod enabled is for UP itself. There are no mods installed.

My path to arriving at UP 3.0 RC4 was as follows:

-Clean copy of 4.12.2m
-Backwards patched to 4.10m
-same for 4.10.1m
-ran the UP 3.0 RC4 stuff found here: https://www.sas1946.com/main/index.php/topic,23452.0.html

I then copied my conf.ini and "users" folder into the "UP 3.0 RC4 folder"

no map, no chat bar, and the AI controls script is pushed inboard a few inches like when I have the menu screens up. Any clue on how I could fix this Sir?

~S



Logged

SAS~Storebror

  • Editor
  • member
  • Offline Offline
  • Posts: 23561
  • Taking a timeout
    • STFU
Re: UP3 RC04 Screen Resolution
« Reply #5 on: May 27, 2017, 12:26:28 AM »

Would it be possible for you to load up your whole conf.ini here for me to copy and paste
Sure:
Code: [Select]
[il2]
title=Il2-Sturmovik Forgotten Battles
hotkeys=HotKey game

[window]
width=1920
height=1080
FullScreen=1
ChangeScreenRes=1
ColourBits=32
DepthBits=24
StencilBits=8
DrawIfNotFocused=1
EnableResize=0
EnableClose=1
SaveAspect=0
Use3Renders=0
WideScreenFoV=1
UIColor=1
UIDetail=0
UIBackground=de

[GLPROVIDER]
GL=Opengl32.dll

[GLPROVIDERS]
Open GL=Opengl32.dll
DirectX=dx8wrap.dll

[NET]
speed=1000000
routeChannels=0
serverChannels=31
localPort=21000
remotePort=21010
SkinDownload=1
serverName=Test1
serverDescription=
remoteHost=
socksHost=
checkServerTimeSpeed=1
checkClientTimeSpeed=0
disableNetStatStatistics=0
showPilotNumber=1
showPilotPing=1
showPilotName=1
showPilotScore=1
showTeamScore=0
cumulativeTeamScore=0
showPilotArmy=1
showPilotACDesignation=1
showPilotACType=1
filterUserNames=0
reflyKIADelay=0
maxAllowedKIA=-1
reflyKIADelayMultiplier=0.0
reflyDisabled=0
allowMorseAsText=1
allowCustomSounds=1

[MaxLag]
farMaxLagTime=10.0
nearMaxLagTime=2.0
cheaterWarningDelay=5.0
cheaterWarningNum=-1

[chat]
region=(dx=0.65729165,dy=0.16018519,x=0.0,y=0.0)
msg0=<timeleft
adr0=ALL
adr1=MY_ARMY
adr2=Server
msg1=<nextmap
msg2=<gunstat
msg3=<vote\u0020yes
msg4=<vote\u0020no
msg5=
msg6=
msg8=
msg9=
msg7=

[game]
Arcade=0
HighGore=1
mapPadX=0.6515625
mapPadY=-0.06759259
viewSet=53
Intro=0
NoSubTitles=1
NoChatter=1
NoHudLog=0
iconTypes=3
NoLensFlare=0
eventlog=eventlog.lst
eventlogkeep=0
3dgunners=1
mapPadMode=2
mapZoomMode=0
mapWheelMode=1
TypeClouds=1
ScreenshotType=2
RecordingIndicator=0
MapAlpha=0.46
SaveTrk=1
SkipParatrooperViews=0
NoMissionInfoHud=0
noKillInfoHud=0
BlockMorseChat=0
SmallMapWPLabels=1
ShowMorseAsText=1
IconUnits=0

[HotKey game]
PrintScreen=ScreenShot
P=pause
Pause=pause

[HotKey gui]
Escape=activate

[HookViewFly Config]
timeFirstStep=2.0
deltaZ=10.0

[HookView]
MouseLeft=Len

[HookView Config]
AzimutSpeed=0.1
TangageSpeed=0.1
LenSpeed=1.0
MinLen=1.0
DefaultLen=20.0
MaxLen=3000.0
Speed=6
LeanF=0.39
LeanS=0.39
Raise=0.2
RubberBand=0.5

[HotKey builder]
MouseLeft=objectMove
MouseRight=popupmenu
Enter=freeView
Shift MouseLeft=worldZoom
Alt MouseLeft=select+
Alt MouseRight=select-
Alt Ctrl=unselect
PageDown=change+
PageUp=change-
End=change++
Home=change--
Ctrl MouseLeft=insert+
Insert=insert+
NumPad-0=insert+
F=fill
Ctrl MouseRight=delete+
NumPad.=delete+
Delete=delete+
Backspace=cursor
Tab=cursor
F10=land
F11=onLand
NumPad-=normalLand
NumPad+=toLand
NumPad-5=resetAngles
NumPad-8=resetTangage90
NumPad-7=stepAzimut-5
NumPad-4=stepAzimut-15
NumPad-1=stepAzimut-30
NumPad-9=stepAzimut5
NumPad-6=stepAzimut15
NumPad-3=stepAzimut30

[MouseXYZ]
F1=SpeedSlow
F2=SpeedNormal
F3=SpeedFast
MouseRight=XYmove
F4 MouseRight=Zmove
MouseMiddle=Amove
F5 MouseRight=Amove
F6 MouseRight=Tmove
F7 MouseRight=Kmove

[MouseXYZ Config]
RealTime=1

[HotKey Console]
Shift Tab=Activate

[Console]
HISTORY=1024
HISTORYCMD=1024
LOAD=console.cmd
SAVE=console.cmd
LOG=1
LOGTIME=1
LOGFILE=log.lst
LOGKEEP=0

[sound]
SoundUse=1
SoundEngine=1
Speakers=1
Placement=0
SoundFlags.reversestereo=0
RadioFlags.Enabled=1
RadioEngine=2
MusicVolume=14
ObjectVolume=5
MusState.takeoff=0
MusState.inflight=0
MusState.crash=0
MusFlags.play=0
MasterVolume=4
Attenuation=7
SoundMode=3
SamplingRate=2
NumChannels=3
SoundExt.occlusions=1
SoundFlags.hardware=1
SoundFlags.streams=1
SoundFlags.duplex=1
SoundExt.acoustics=1
SoundExt.volumefx=1
SoundFlags.voicemgr=1
SoundFlags.static=1
VoiceVolume=14
Channels=2
SoundExt.extrender=0
SoundFlags.bugscorrect=0
SoundSetupId=8
ActivationLevel=0.02
Preemphasis=0.85
RadioLatency=0.5
AGC=1
PTTMode=1
SoundFlags.UseRadioChatter=0
SoundFlags.AutoActivation=0
RadioFlags.PTTMode=0
RadioFlags.PlayClicks=0
ActLevel=0
MicLevel=0
SoundFlags.forceEAX1=0

[rts]
ProcessAffinityMask=14
mouseUse=2
joyUse=1
trackIRUse=1
DisableIME=0
locale=de
JoyProfile=0
UseSmartAxis=0

[rts_mouse]
SensitivityX=1.0
SensitivityY=1.0
Invert=0
SensitivityZ=1.0

[rts_joystick]
X=0 1 4 9 16 25 36 49 64 81 100 0
Y=0 1 4 9 16 25 36 49 64 81 100 0
Z=0 10 20 30 40 50 60 70 80 90 100
RZ=0 10 20 30 40 50 60 70 80 90 100 0
FF=0
U=0 10 20 30 40 50 60 70 80 90 100 0
V=0 10 20 30 40 50 60 70 80 90 100 0
1X=0 100 100 100 100 100 100 100 100 100 100 0 0
1Y=0 100 100 100 100 100 100 100 100 100 100 0 0
1RZ=0 10 30 50 61 73 82 90 95 100 100 0 0
1U=0 100 100 100 100 100 100 100 100 100 100 0 2
1V=0 10 20 30 40 50 60 70 80 90 100 0 0
1X1=0 100 100 100 100 100 100 100 100 100 100 0 2
1Y1=0 100 100 100 100 100 100 100 100 100 100 0 2
1Z1=0 100 100 100 100 100 100 100 100 100 100 0 0
1RX1=0 10 20 30 40 50 60 70 80 90 100 0 0
1RY1=0 10 20 30 40 50 60 70 80 90 100 0 0
1RZ1=0 100 100 100 100 100 100 100 100 100 100 0 0
1U1=0 100 100 100 100 100 100 100 100 100 100 0 0
1V1=0 100 100 100 100 100 100 100 100 100 100 0 0
1X2=0 100 100 100 100 100 100 100 100 100 100 0 0
1Y2=0 100 100 100 100 100 100 100 100 100 100 0 0
1Z2=0 100 100 100 100 100 100 100 100 100 100 0 0
1RX2=0 100 100 100 100 100 100 100 100 100 100 0 0
1RY2=0 100 100 100 100 100 100 100 100 100 100 0 0
1RZ2=0 100 100 100 100 100 100 100 100 100 100 0 0
1U2=0 100 100 100 100 100 100 100 100 100 100 0 0
1V2=0 100 100 100 100 100 100 100 100 100 100 0 0
1Z=0 100 100 100 100 100 100 100 100 100 100 0 2
1RX=0 10 20 30 40 50 60 70 80 90 100 0 0
1RY=0 10 20 30 40 50 60 70 80 90 100 0 0

[rts_joystick1]
1X=20 4 8 13 19 28 39 51 65 82 100 0 0
1Y=11 4 8 13 19 28 39 51 65 82 100 0 0
1Z=0 100 100 100 100 100 100 100 100 100 100 0 0
1RX=0 100 100 100 100 100 100 100 100 100 100 0 0
1RY=0 100 100 100 100 100 100 100 100 100 100 0 0
1RZ=10 3 7 12 19 27 38 51 65 82 100 0 0
1U=0 105 105 105 105 105 105 105 105 105 105 0 0
1V=0 100 100 100 100 100 100 100 100 100 100 0 0
FF=0

[rts_joystick2]
1X=20 4 8 13 19 28 39 51 65 82 100 0 0
1Y=11 4 8 13 19 28 39 51 65 82 100 0 0
1Z=0 100 100 100 100 100 100 100 100 100 100 0 0
1RX=0 100 100 100 100 100 100 100 100 100 100 0 0
1RY=0 100 100 100 100 100 100 100 100 100 100 0 0
1RZ=10 3 7 12 19 27 38 51 65 82 100 0 0
1U=0 105 105 105 105 105 105 105 105 105 105 0 0
1V=0 100 100 100 100 100 100 100 100 100 100 0 0
FF=0

[rts_joystick3]
1X=20 4 8 13 19 28 39 51 65 82 100 0 0
1Y=11 4 8 13 19 28 39 51 65 82 100 0 0
1Z=0 100 100 100 100 100 100 100 100 100 100 0 0
1RX=0 100 100 100 100 100 100 100 100 100 100 0 0
1RY=0 100 100 100 100 100 100 100 100 100 100 0 0
1RZ=10 3 7 12 19 27 38 51 65 82 100 0 0
1U=0 105 105 105 105 105 105 105 105 105 105 0 0
1V=0 100 100 100 100 100 100 100 100 100 100 0 0
FF=0


[Render_DirectX]
TexQual=3
TexMipFilter=2
TexCompress=0
TexFlags.UseDither=1
TexFlags.UseAlpha=0
TexFlags.UseIndex=0
TexFlags.PolygonStipple=1
TexFlags.UseClampedSprites=0
TexFlags.DrawLandByTriangles=1
TexFlags.UseVertexArrays=1
TexFlags.DisableAPIExtensions=0
TexFlags.ARBMultitextureExt=1
TexFlags.TexEnvCombineExt=1
TexFlags.SecondaryColorExt=1
TexFlags.VertexArrayExt=1
TexFlags.ClipHintExt=0
TexFlags.UsePaletteExt=0
TexFlags.TexAnisotropicExt=0
TexFlags.TexCompressARBExt=1
TexFlags.TexEnvCombine4NV=0
TexFlags.TexEnvCombineDot3=0
TexFlags.DepthClampNV=0
TexFlags.SeparateSpecular=0
TexFlags.TextureShaderNV=0

HardwareShaders=0

Shadows=2
Specular=2
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
VisibilityDistance=3

Sky=2
Forest=2
LandShading=3
LandDetails=2

LandGeom=2
TexLarge=1
TexLandQual=3
TexLandLarge=1

VideoSetupId=4
ForceShaders1x=0
PolygonOffsetFactor=-0.15
PolygonOffsetUnits=-3.0

[Render_OpenGL]
TexQual=3
TexMipFilter=3
TexCompress=0
TexFlags.UseDither=0
TexFlags.UseAlpha=0
TexFlags.UseIndex=0
TexFlags.PolygonStipple=0
TexFlags.UseClampedSprites=0
TexFlags.DrawLandByTriangles=0
TexFlags.UseVertexArrays=1
TexFlags.DisableAPIExtensions=0
TexFlags.ARBMultitextureExt=1
TexFlags.TexEnvCombineExt=1
TexFlags.SecondaryColorExt=1
TexFlags.VertexArrayExt=1
TexFlags.ClipHintExt=0
TexFlags.UsePaletteExt=0
TexFlags.TexAnisotropicExt=1
TexFlags.TexCompressARBExt=0

TexFlags.TexEnvCombine4NV=1
TexFlags.TexEnvCombineDot3=1
TexFlags.DepthClampNV=1
TexFlags.SeparateSpecular=1
TexFlags.TextureShaderNV=1

HardwareShaders=1

Shadows=2
Specular=2
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
VisibilityDistance=3

Sky=2
Forest=2
LandShading=3
LandDetails=2

LandGeom=2
TexLarge=1
TexLandQual=3
TexLandLarge=1

VideoSetupId=17
Water=4
Effects=2
ForceShaders1x=0
PolygonOffsetFactor=-0.0625
PolygonOffsetUnits=-1.0

FogLow=2
FogHaze=4

[Mods]
Stabs4All=1
HUDLogLines=12
SpeedbarTAS=0
PALQMBLinesMap=24
PALQMBLinesPl0=24
PALQMBLinesPl1=18
PALQMBLinesPl2=18
PALQMBLinesPl3=17
PALQMBLinesPl4=18
PALQMBLinesPl5=18
PALQMBLinesPl6=24
PALQMBLinesPl7=24
HighSpeedNet=1
AddDefaultCountryNone=1
AutoNtrk=1
SkinDownloadNotifications=1
InstantLog=0

[DeviceLink]
port=10001
host=127.0.0.1
IPS=127.0.0.1

Best regards - Mike
Logged
Don't split your mentality without thinking twice.

robert31178

  • member
  • Offline Offline
  • Posts: 113
Re: UP3 RC04 Screen Resolution
« Reply #6 on: June 24, 2017, 03:04:47 PM »

Thanks Mike!! Sorry I never got around to responding, but thank you!!

~S
Logged

robert31178

  • member
  • Offline Offline
  • Posts: 113
Re: UP3 RC04 Screen Resolution
« Reply #7 on: July 12, 2017, 06:02:31 AM »

 I ended up with 1920x1080, and with the widescreen mod it looks beautiful!!

Thanks for your help!!
Logged

SAS~Storebror

  • Editor
  • member
  • Offline Offline
  • Posts: 23561
  • Taking a timeout
    • STFU
Re: UP3 RC04 Screen Resolution
« Reply #8 on: July 12, 2017, 06:27:14 AM »

I'm glad that it worked for you.
Welcome to the club of happy UP3 rebels 8)

Cheers!
Mike
Logged
Don't split your mentality without thinking twice.

Avio

  • member
  • Offline Offline
  • Posts: 4
Re: UP3 RC04 Screen Resolution
« Reply #9 on: June 12, 2018, 01:23:55 AM »

Sorry for digging up this old topic ... I just installed to latest UP3 RC4 and followed the instructions here to change screen to 1980 x 1020, but upon reloading game, it only shows the initial splash screen and then it disappears and nothing happens after that.

Did I miss out something?

Thanks.

Avio

Logged

SAS~Skylla

  • SAS Team
  • member
  • Offline Offline
  • Posts: 1950
  • Flying Ass Clown N°24
Re: UP3 RC04 Screen Resolution
« Reply #10 on: June 12, 2018, 03:49:31 AM »

I just installed to latest UP3 RC4
What do you mean with "latest UP3 RC4"?
Please describe your installation process in detail (i.e. step by step). Which mods did you activate via JSGME? What Mods do you have in your #UP# folder?

And most important, please post your logfile!

Read how to get the log here, and the instant log here.

Important: read here which part(s) from the log to post
and how to post it. (code option!)
Logged
When all else fails: read the instructions!

Avio

  • member
  • Offline Offline
  • Posts: 4
Re: UP3 RC04 Screen Resolution
« Reply #11 on: June 12, 2018, 04:46:30 PM »

I do not have access to my IL2 PC now. What I did was a fresh install of IL2 1946, patched to 4.10.1m, and then installed UP3 followed by the 301 patch.

Avio
Logged
Pages: [1]   Go Up
 

Page created in 0.073 seconds with 26 queries.