Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[X-Raptor]

Could someone tell me :

-where I must put the folder (in #UP# or in jsgmemods, or in an other MODS folder)

-which configuration of the game I must use (screen size, graphic pilot, lines in conf.ini)

-if it works in 4.10.1

My graphic card is an Asus EN84400GS Silent with nVidia GeForce 8400 GPU.

- It goes into MOD Folder and loaded as 1st (rename it with a bunch of "000_" if needed)
- I think best is to test with a "vanilla" mod game version (UP, HFSX,SAS modactivator)
- Vanilla 4.10.1 cant' load any MOD (see above) so the mod we are talking here will never load too.

remember to add lines AS IN 1ST POST OF THIS TOPIC into conf.ini


>>PLEASE PEOPLE REPORT BACK HERE WHO HAVE THIS MOD WORKING<<<

[spitfire-MKIX]

So, I have to create a MODS folder? And what's a "vanilla" game???

[santobr]

"Vanilla" is a game without mods, it is the original game.




santobr.

[spitfire-MKIX]

So, yhat means that I have to desactivate all my mods before trying this one?

[spitfire-MKIX]

Ok, but where could I download the first version of the 3D mod?

[benitomuso]

Yes,
1) disable All mods (PUT A "-" IN FRONT OF ANY MOD that is into MOD FOLDER + dISABLE all mods into JSME if there are any)
2) then D/L (as x instructions Benitomuso) the mod "6DoFNormalMouse"  here:
 https://www.sas1946.com/main/index.php/topic,12198.0.html
3) D/l this mod "3D Stable V2" and "3D 1st version"  from the 1st page of this topic and put them into MOD folder.
4) Put all into MOD folder of a version of game that support the mod option (HFSX, UP 3 RC 4, SAS Modact, DBW) enable the 6DofNormalMouse mod and try 1 version of 3D mod 1 for time (disabling the other one with a "-")
5) add lines into conf.ini as written in the 1st post by Benitomuso.
6) wear goggles with red & blue trasparent stripes testing the function of them looking the shots in the 1st post of this topic (you
    have to see 3D planes! (I see them really well after I colored a trasparent film paper with 2 permanent red/blue markers)
7) run game in OGL (not DirectX)
8 ) select in Graphic card option "Vertical Sync" on/off  (test in both situation - VSync on or off -if something change..
9 ) play with mirrors on/off (as I discovered they affect "something" in the mod function).

enjoy the 3D experience flying if the mod 3D works for you... for me  no for the moment, both versions.

X-Raptor,
                not exactly, let me correct your list:

1) Not necesary to: disable All mods (PUT A "-" IN FRONT OF ANY MOD that is into MOD FOLDER + dISABLE all mods into JSME if there are any)
2) Don't Donwload the "6DoFNormalMouse", only disable this MOD (and any other 6DOF MOD) because if you have one which loads before, it will avoid the Stereo 3D of working.
3) Check out the new "Stereo3DV3b" and put it into the MODS folder (Vanilla and conventional MODding), inside #DBW if you use DBW and inside #UP# if you use UP3.
COVERED BEFORE, NOT NEEDED: 4) Put all into MOD folder of a version of game that support the mod option (HFSX, UP 3 RC 4, SAS Modact, DBW) enable the 6DofNormalMouse mod and try 1 version of 3D mod 1 for time (disabling the other one with a "-")
5) Convinnient but not neded: add lines into conf.ini as written in the 1st post by Benitomuso.
6) wear goggles with red & blue trasparent stripes testing the function of them looking the shots in the 1st post of this topic (you
    have to see 3D planes! (I see them really well after I colored a trasparent film paper with 2 permanent red/blue markers)
7) run game in OGL (not DirectX)
8 ) select in Graphic card option "Vertical Sync" on/off  (test in both situation - VSync on or off -if something change..
9 ) play with mirrors on/off (as I discovered they affect "something" in the mod function).

[spitfire-MKIX]

Ok, but where do I find the "Stereo3DV3b"?

[kapteeni]

Ok, but where do I find the "Stereo3DV3b"?

+1
Can't get this working.. No matter what
kap

[Whiskey_Sierra_972]

Tested in DBW installation with 6dof x track IR disabled.

I got shaking with v2 but no 3d and shaking and cyano/red shaking with v1 but with some strange artifacts as the foreground panel of the game showing in transparence!

I have DBW 1.6 with only some plane installed , GTS250 with latest driver , XPsp3 , E8400@3g , 4GB ram

[joycecaster]

+1

[gianluca]

Tested in DBW installation with 6dof x track IR disabled.

I got shaking with v2 but no 3d and shaking and cyano/red shaking with v1 but with some strange artifacts as the foreground panel of the game showing in transparence!

I have DBW 1.6 with only some plane installed , GTS250 with latest driver , XPsp3 , E8400@3g , 4GB ram

with or without "carsmasters light" walter?

[Whiskey_Sierra_972]

Tested in DBW installation with 6dof x track IR disabled.

I got shaking with v2 but no 3d and shaking and cyano/red shaking with v1 but with some strange artifacts as the foreground panel of the game showing in transparence!

I have DBW 1.6 with only some plane installed , GTS250 with latest driver , XPsp3 , E8400@3g , 4GB ram

with or without "carsmasters light" walter?

First bold & underscore: because you can have 6dof enabled by IL2 exe;
Second bolde & underscore: because I have only some planes and nothing other in DBW....at least ATM