Special Aircraft Service

Individual Mod Downloads for IL-2 1946 => Aircraft => Jets => Topic started by: FL2070 on October 24, 2020, 01:05:42 PM

Title: Bison_M's Yak-17 Updated With More Accurate FM, Armament, Damage Model [4.12]
Post by: FL2070 on October 24, 2020, 01:05:42 PM
Ages ago, Bison_M made his excellent Yak-17 frankenplane (https://www.sas1946.com/main/index.php/topic,41588.0.html).

But, his mod was only a 3D mod, while the real Yak-17 had many other differences. So, owing to his agreement to DWTFYWWI (https://www.sas1946.com/main/index.php?action=profile;u=20578), here is an edited version that is more historically accurate.

Edits:
- Using historical NS-23 cannon instead of VYa-23
- Has historical fuel capacity of 884kg instead of 590
- Has historical ammunition load of 105 rounds per gun instead of 60
- Has historical engine RD-10A (9.8kn thrust) instead of RD-10 (8.8kn thrust)
- Wings can take slightly more damage; real Yak-17 had reinforced wings to hold wingtip fuel tanks

Download here (http://www.mediafire.com/file/0h9am7ux5odhhbg/Yak17.rar/file)

The .ini and .properties lines are included in the readme.
Title: Re: Yak-17 Updated With More Accurate FM, Armament, Damage Model [4.12]
Post by: VasyafromBelarus on October 26, 2020, 10:33:56 AM
Wrong spawn. Plane jumping up. 4.12.2+Modact 5.3+JetEra 1.4+QMBpro+MissionPro.
Title: Re: Yak-17 Updated With More Accurate FM, Armament, Damage Model
Post by: FL2070 on October 26, 2020, 11:16:52 AM
The plane spawns normally for me using ModAct 5.3, ModAct 6.4, and BAT. It's most likely a problem with the mission or map you're using, not the mod itself.

(https://i.postimg.cc/N0CZVfRy/image.png)
Title: Re: Yak-17 Updated With More Accurate FM, Armament, Damage Model [4.12]
Post by: Hubberranz on June 10, 2021, 08:31:54 PM
Wrong spawn. Plane jumping up. 4.12.2+Modact 5.3+JetEra 1.4+QMBpro+MissionPro.
The "open canopy mod for all Yaks" cause these jumps. So it is not compatible. I use through JSGME.


..I had an issue with the RD-10A engine: ( no external sounds )
     SAS 5.3 412   with   VictorSOUNDMod_V5,4,2_4.12   ...until engine reach high rev.

Code: [Select]
[12:37:40 AM] ERROR loading sound control sample.xJ47_1000.wav.dist
[12:37:40 AM] ERROR loading sound control sample.xJ47_2000.wav.dist

At   VictorSOUNDMod_V5,4,2_4.12 \Presets\ sounds\ motor.GE40.prs

( IF your.. )  lines  are reading:

[sample.xJ42_1000.wav.dist]     --->         [sample.xJ47_1000.wav.dist]   as corrected.
[sample.xJ42_2000.wav.dist]     ---->        [sample.xJ47_2000.wav.dist]   as corrected.

..might correct other planes.

Title: Re: Bison_M's Yak-17 Updated With More Accurate FM, Armament, Damage Model [4.12]
Post by: Marat on June 11, 2021, 12:54:15 PM
Unfortunatelly falls down from the sky and explodes when the mission starts from runway in my Modact 6.4 for 4.13.4 version.
If started in the sky, once engine is turned off, then never is on again
The log shows only this info
FM called 'FlightModels/Yak-17.fmd:YAK17_FM' is being loaded from File: 'yak17_fm'
[18:44:00]   INTERNAL ERROR: HierMesh: Can't find chunk 'GearL4_D0'
[18:44:00]   INTERNAL ERROR: HierMesh: Can't find chunk
Title: Re: Bison_M's Yak-17 Updated With More Accurate FM, Armament, Damage Model [4.12]
Post by: Hubberranz on June 11, 2021, 02:44:11 PM
I don't know about what happens in 413. I don't run it. ( The plane has been marked for 412 )

But a 'Can't find chunk' is not a critical error.
It is just a missing entry by that name in the hier file and should have no consequence.