Special Aircraft Service

The SAS Factory - Tech Help, Ancient Mods etc. => Tech Help : Using Mods => Tech Help (other than BAT or IL-2 Great Battles) => Hardware => Topic started by: SAS~Bombsaway on January 20, 2018, 09:11:42 AM

Title: Nvidia settings for GE Force GT 710?
Post by: SAS~Bombsaway on January 20, 2018, 09:11:42 AM
I know this has been talked about in the past but does anyone have a more to date setting for the Nvidia tool and the config.ini? I have done a search but the topics seem dated. I'm using a GE Force GT 710.

Thank you.
Title: Re: Nvidia settings for GE Force GT 710?
Post by: Piotrek1 on January 20, 2018, 01:26:34 PM
Hi SAS~Bombsaway. I'm not sure if I can help because my computer is already a bit old, in any case I use such settings in my conf.ini;
Code: [Select]
[il2]
title=Il2-Sturmovik Forgotten Battles
hotkeys=HotKey game

[window]
width=1152
height=864
ColourBits=32
DepthBits=24
StencilBits=8
ChangeScreenRes=1
FullScreen=1
DrawIfNotFocused=0
EnableResize=0
EnableClose=1
SaveAspect=0
Use3Renders=0
WideScreenFoV=1
UIColor=0
UIDetail=0
UIBackground=en

[GLPROVIDER]
GL=Opengl32.dll

[GLPROVIDERS]
Open GL=Opengl32.dll
DirectX=dx8wrap.dll

[NET]
speed=5000
routeChannels=0
serverChannels=31
localPort=21000
remotePort=21000
SkinDownload=1
serverName=No Name
serverDescription=
remoteHost=
localHost=
socksHost=
checkServerTimeSpeed=1
checkClientTimeSpeed=0
disableNetStatStatistics=0
showPilotNumber=1
showPilotPing=1
showPilotName=1
showPilotScore=1
showTeamScore=0
cumulativeTeamScore=0
showPilotArmy=1
showPilotACDesignation=1
showPilotACType=1
filterUserNames=0
reflyKIADelay=0
maxAllowedKIA=-1
reflyKIADelayMultiplier=0.0
reflyDisabled=0
allowMorseAsText=0
allowCustomSounds=0

[MaxLag]
farMaxLagTime=10.0
nearMaxLagTime=2.0
cheaterWarningDelay=5.0
cheaterWarningNum=-1

[chat]
region=(dx=0.6925,dy=0.071666665,x=0.0,y=0.0)

[game]
Arcade=0
HighGore=1
mapPadX=0.6684028
mapPadY=-0.047453705
viewSet=57
Intro=0
NoSubTitles=1
NoChatter=0
NoHudLog=1
NoLensFlare=1
iconTypes=3
eventlog=eventlog.lst
eventlogkeep=0
3dgunners=1
ScreenshotType=1
RecordingIndicator=0
MapAlpha=0.99
SaveTrk=1
IconUnits=0
SkipParatrooperViews=0
NoMissionInfoHud=0
noKillInfoHud=0
BlockMorseChat=0
SmallMapWPLabels=1
ShowMorseAsText=0

[HotKey game]
PrintScreen=ScreenShot
P=pause
Pause=pause

[HotKey gui]
Escape=activate

[HookViewFly Config]
timeFirstStep=2.0
deltaZ=10.0

[HookView]
MouseLeft=Len

[HookView Config]
AzimutSpeed=0.1
TangageSpeed=0.1
LenSpeed=1.0
MinLen=1.0
DefaultLen=20.0
MaxLen=3000.0
Speed=6
LeanF=0.39
LeanS=0.39
Raise=0.2
RubberBand=0.5

[HotKey builder]
Ctrl C=copy
Ctrl X=cut
Ctrl V=paste
MouseLeft=objectMove
MouseRight=popupmenu
Enter=freeView
Shift MouseLeft=worldZoom
Alt MouseLeft=select+
Alt MouseRight=select-
Alt Ctrl=unselect
PageDown=change+
PageUp=change-
End=change++
Home=change--
Ctrl MouseLeft=insert+
Insert=insert+
NumPad-0=insert+
F=fill
Ctrl MouseRight=delete+
NumPad.=delete+
Delete=delete+
Backspace=cursor
Tab=cursor
F10=land
F11=onLand
NumPad-=normalLand
NumPad+=toLand
NumPad-5=resetAngles
NumPad-8=resetTangage90
NumPad-7=stepAzimut-5
NumPad-4=stepAzimut-15
NumPad-1=stepAzimut-30
NumPad-9=stepAzimut5
NumPad-6=stepAzimut15
NumPad-3=stepAzimut30

[MouseXYZ]
F1=SpeedSlow
F2=SpeedNormal
F3=SpeedFast
MouseRight=XYmove
F4 MouseRight=Zmove
MouseMiddle=Amove
F5 MouseRight=Amove
F6 MouseRight=Tmove
F7 MouseRight=Kmove

[MouseXYZ Config]
RealTime=1

[HotKey Console]
Shift Tab=Activate
[Console]
HISTORY=1024
HISTORYCMD=1024
LOAD=console.cmd
SAVE=console.cmd
LOG=1
LOGTIME=1
LOGFILE=SAS.txt
LOGKEEP=0

[sound]
SoundUse=1
SoundEngine=1
Speakers=0
Placement=0
SoundFlags.reversestereo=0
RadioFlags.Enabled=0
RadioEngine=2
MusicVolume=10
ObjectVolume=14
MusState.takeoff=1
MusState.inflight=1
MusState.crash=1
MusFlags.play=0
MasterVolume=2
Attenuation=7
SoundMode=1
SamplingRate=0
NumChannels=2
SoundExt.occlusions=0
SoundFlags.hardware=1
SoundFlags.streams=1
SoundFlags.duplex=1
SoundExt.acoustics=0
SoundExt.volumefx=0
SoundFlags.voicemgr=0
SoundFlags.static=1
VoiceVolume=13
Channels=2
SoundExt.extrender=0
SoundFlags.bugscorrect=0
SoundSetupId=8
ActivationLevel=0.02
Preemphasis=0.85
RadioLatency=0.5
AGC=1
PTTMode=1
SoundFlags.UseRadioChatter=0
SoundFlags.AutoActivation=0
RadioFlags.PTTMode=0
RadioFlags.PlayClicks=0
ActLevel=0
MicLevel=0
SoundFlags.forceEAX1=0

[rts]
;ProcessAffinityMask=1
mouseUse=2
joyUse=1
trackIRUse=1
DisableIME=0
locale=en
JoyProfile=0
UseSmartAxis=0

[rts_mouse]
SensitivityX=1.0
SensitivityY=1.0
Invert=0
SensitivityZ=1.0

[rts_joystick]
X=0 1 4 9 16 25 36 49 64 81 100 0
Y=0 1 4 9 16 25 36 49 64 81 100 0
Z=0 10 20 30 40 50 60 70 80 90 100
RZ=0 10 20 30 40 50 60 70 80 90 100 0
FF=0
U=0 10 20 30 40 50 60 70 80 90 100 0
V=0 10 20 30 40 50 60 70 80 90 100 0
1X=0 10 20 30 40 50 60 70 80 90 100 0 0
1Y=0 10 20 30 40 50 60 70 80 90 100 0 0
1Z=0 10 20 30 40 50 60 70 80 90 100 0 0

[Mods]
PALMODsColor=2
PALQMBLinesMap=10
PALQMBLinesPl0=25
PALQMBLinesPl1=20
PALQMBLinesPl2=19
PALQMBLinesPl3=18
PALQMBLinesPl4=18
PALQMBLinesPl5=18
PALQMBLinesPl6=18
PALQMBLinesPl7=18
BombBayDoors=0
RandomSplash=1
netCallsign=
TracersPlayer=400
TracersAircrafts=300
TracersWorld=25
TracersWirbelwind=50
HUDLogLines=3
HUDLogColor1=80FFFFFF
HUDLogColor2=10FFFFFF
HUDLogBottomColor1=80FFFFFF
HUDLogBottomColor2=10FFFFFF

[Render_DirectX]
TexQual=3
TexMipFilter=2
TexCompress=0
TexFlags.UseDither=1
TexFlags.UseAlpha=0
TexFlags.UseIndex=0
TexFlags.PolygonStipple=1
TexFlags.UseClampedSprites=0
TexFlags.DrawLandByTriangles=1
TexFlags.UseVertexArrays=1
TexFlags.DisableAPIExtensions=0
TexFlags.ARBMultitextureExt=1
TexFlags.TexEnvCombineExt=1
TexFlags.SecondaryColorExt=1
TexFlags.VertexArrayExt=1
TexFlags.ClipHintExt=0
TexFlags.UsePaletteExt=0
TexFlags.TexAnisotropicExt=0
TexFlags.TexCompressARBExt=1
TexFlags.TexEnvCombine4NV=1
TexFlags.TexEnvCombineDot3=0
TexFlags.DepthClampNV=1
TexFlags.SeparateSpecular=0
TexFlags.TextureShaderNV=1

HardwareShaders=0

TypeClouds=1

Shadows=2
Specular=2
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
VisibilityDistance=3

Sky=2
Forest=2
LandShading=3
LandDetails=2

LandGeom=2
TexLarge=1
TexLandQual=3
TexLandLarge=1

VideoSetupId=4

[Render_OpenGL]
TexQual=3
TexMipFilter=3
TexCompress=0
TexFlags.UseDither=0
TexFlags.UseAlpha=0
TexFlags.UseIndex=0
TexFlags.PolygonStipple=1
TexFlags.UseClampedSprites=1
TexFlags.DrawLandByTriangles=0
TexFlags.UseVertexArrays=1
TexFlags.DisableAPIExtensions=0
TexFlags.ARBMultitextureExt=1
TexFlags.TexEnvCombineExt=1
TexFlags.SecondaryColorExt=1
TexFlags.VertexArrayExt=1
TexFlags.ClipHintExt=1
TexFlags.UsePaletteExt=1
TexFlags.TexAnisotropicExt=1
TexFlags.TexCompressARBExt=0

TexFlags.TexEnvCombine4NV=1
TexFlags.TexEnvCombineDot3=1
TexFlags.DepthClampNV=1
TexFlags.SeparateSpecular=1
TexFlags.TextureShaderNV=1

HardwareShaders=1

TypeClouds=1
FogLow=2
FogHaze=2

Shadows=2
Specular=2
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
VisibilityDistance=3

Sky=2
Forest=3
LandShading=3
LandDetails=2

LandGeom=2
TexLarge=1
TexLandQual=3
TexLandLarge=1

VideoSetupId=17
Water=3
Effects=1
ForceShaders1x=0

PolygonOffsetFactor=-0.15
PolygonOffsetUnits=-3.0
[QMB]
PlaneList=0

[DGen]
CampaignLength=Long
MissionDistance=75
GroundIntensity=High
AirIntensity=High
RandomFlights=5
CampaignAI=Normal
CampaignMissions=Hard
MaxBomberSkill=1
SlowFire=20
MaxFLAK=100
OperationVictory=1000
OperationDefeat=-1000
WarVictory=10000
WarDefeat=-10000
;UseParkedPlanes=1
NoAirfieldHighlight=0


Windows 7 Ultimate
AMD Athlon(tm) 64 X2 Dual Core Processor 4400+    2.31 GHz               
GeForce 9500GT

Best regards,
Piotrek
Title: Re: Nvidia settings for GE Force GT 710?
Post by: SAS~Bombsaway on January 20, 2018, 02:22:10 PM
Thank you. :)
Title: Re: Nvidia settings for GE Force GT 710?
Post by: startrek66 on January 24, 2018, 12:34:12 AM
I know this has been talked about in the past but does anyone have a more to date setting for the Nvidia tool and the config.ini? I have done a search but the topics seem dated. I'm using a GE Force GT 710.

Thank you.
how do you rate this gt 710 with the Sim? I have to update my integrated card and I'm interested to know if this card is suitable for good performance. Thank you for your answer
Title: Re: Nvidia settings for GE Force GT 710?
Post by: SAS~Bombsaway on January 24, 2018, 05:07:53 AM
I like it well enough. It works well with the game but it is an older card that I bought off the internet. I bought it because it has an HDMI out on it so I could hook it up to my tv.
Title: Re: Nvidia settings for GE Force GT 710?
Post by: Paulo Hirth on January 24, 2018, 05:18:38 AM
  Another hint in nvidia driver settings: disable anisotropic filter (more FPS) and set anti-alyasing to 8X.
Title: Re: Nvidia settings for GE Force GT 710?
Post by: SAS~Storebror on January 24, 2018, 08:45:16 AM
The x10 series from Nvidia is the absolute basic GPU series, it's the weakest one you can buy.
Anti Aliasing is absolutely out of reach for such kind of card. Disable it completely.
Anisotropic filtering, in contrast to what Paulo Hirth said, is by far not as heavy on the GPU hardware and disabling it will cause horrible steps between different render detail steps. Set AF as high as your card can handle it, 16x would be perfect, 8x would be fine as well, 4x acceptable, anything lower will look butt-ugly.

Cheers!
Mike
Title: Re: Nvidia settings for GE Force GT 710?
Post by: startrek66 on January 24, 2018, 09:24:44 AM
The x10 series from Nvidia is the absolute basic GPU series, it's the weakest one you can buy.
Anti Aliasing is absolutely out of reach for such kind of card. Disable it completely.
Anisotropic filtering, in contrast to what Paulo Hirth said, is by far not as heavy on the GPU hardware and disabling it will cause horrible steps between different render detail steps. Set AF as high as your card can handle it, 16x would be perfect, 8x would be fine as well, 4x acceptable, anything lower will look butt-ugly.

Cheers!
Mike
which nvidia card to be included in a PC with 300 W psu? What do you think about the gt1030?
Title: Re: Nvidia settings for GE Force GT 710?
Post by: SAS~Storebror on January 24, 2018, 10:19:35 AM
The 1030 is still crap.
For comparison: With my GTX 970 I can run IL-2 1946 maxed out, as well as Battle of Stalingrad, but not quite Cliffs of Dover.
With a GTX 750 you can run IL-2 1946 maxed out, but might have to back off on Anti Aliasing settings in Nvidia Control Panel a bit. Battle of Stalingrad will run with medium settings, Cliffs of Dover... no idea. Probably just basic settings.
A GT 740 can barely run IL-2 1946 in perfect settings, but only if you disable all kind of Anti Aliasing and stuff. Battle of Stalingrad, Cliffs of Dover etc. in Fullscreen mode with reasonable quality: Forget it.

So that's the x70->x50->x40 line. Anything below that: No deal.

When you are talking about a 300W PSU, then I take it that the PSU has no 6/8 pin PCI-E connector to give additional power to the graphics card.
That's a quite common issue on smaller PCs.
The solutions is: Get an Nvidia GTX 1050Ti. It's the biggest bang you can get without additional PCI-E connectors, powered solely through the PCI-E slot, with a max. power consumption of 75 Watts.

To numerize it (Passmark values): GTX970=8575, GTX750=3284, GT740=1575. GT1030 would be 2285, GTX1050Ti is 5815. So the 1030 would be below FullScreen "good" threshold, the GTX 1050Ti is right in the middle between the "perfect" 970 and the "still good" 750.

Cheers!
Mike
Title: Re: Nvidia settings for GE Force GT 710?
Post by: startrek66 on January 24, 2018, 12:40:16 PM
I thought that a graphics card of 2017 like the gt1030 could run well on il2 1946. I was wrong.
But if you do not want to use the maximum of details in perfect how many fps can you give this card ?
Title: Re: Nvidia settings for GE Force GT 710?
Post by: SAS~Storebror on January 24, 2018, 11:15:39 PM
That question is impossible to answer.
For one, I can run BoS @60 FPS (and therefore, 1946 of course too) on an old Intel HD2000 CPU-integrated graphics solution - it all depends on the settings which, in this case, are 640x480 windowed mode, no anti aliasing, no anisotropic filtering, lowest texture quality, no shadows, no shaders.
That's the requested 60 FPS - it "just" looks like an old Super NES game console.
On the other hand, the 1030 is optimized for hardware decoding of FullHD video Streams. It's by no means meant to be a graphics card suitable for gaming. The market share, even among Nvidia Cards, is in the low single percentage. You will hardly find anyone with IL-2 1946 using that card on this planet.

Cheers!
Mike
Title: Re: Nvidia settings for GE Force GT 710?
Post by: startrek66 on January 25, 2018, 03:59:29 AM
That question is impossible to answer.
For one, I can run BoS @60 FPS (and therefore, 1946 of course too) on an old Intel HD2000 CPU-integrated graphics solution - it all depends on the settings which, in this case, are 640x480 windowed mode, no anti aliasing, no anisotropic filtering, lowest texture quality, no shadows, no shaders.
That's the requested 60 FPS - it "just" looks like an old Super NES game console.
On the other hand, the 1030 is optimized for hardware decoding of FullHD video Streams. It's by no means meant to be a graphics card suitable for gaming. The market share, even among Nvidia Cards, is in the low single percentage. You will hardly find anyone with IL-2 1946 using that card on this planet.

Cheers!
Mike
thanks for the clarifications. I now have the following configuration: I5-2400 4gb ram and an integrated card intel hd 2000. the PSU is 320W and I do not want to change it for now as all the pc is under warranty. My goal is to improve the appearance of the game and reach 50 or 60 fps stable. Now I have 40 fps of average. What do you recommend, maybe an older Nvidia card that does not need an external power supply.
Title: Re: Nvidia settings for GE Force GT 710?
Post by: startrek66 on February 18, 2018, 11:51:51 PM
after your advice I decided to buy a used gtx750 and I'm satisfied. flying campaigns with a target of fps 60 more or less constant. Thank you
Title: Re: Nvidia settings for GE Force GT 710?
Post by: bobkerman31 on February 24, 2018, 09:18:17 PM
Hey, If you ever do upgrade again the 970 is the sweet spot even for alot of sims im happy I bought this card best chose ive ever made in my life haha. But also keep in mind everyones computer is different.  CPU, HD,SSD, RAM. The config file settings and useful tips and hint from this community helped alot but dont take it for fact. For some reason people lie and make up performance numbers for there game and  some of the gpu cards which is funny cause you can just google it.... but experiment with stuff that's the best way, Alot of whiskey has disappeared because of me focusing on it hahha. good luck! glad to hear its running smoother.

sincerly Bob
 
Title: Re: Nvidia settings for GE Force GT 710?
Post by: Mick on February 24, 2018, 11:47:16 PM
... same with me, just swapped my old and faithful GTX 260 (with 894 Mb memory ...) for a GTX 970, and it's night and day ...!!!  :P

Well in fact bought a second hand rig with I7 4790K @4 Ghz, 16 gigs of RAM, Asus Z97 Pro MB, Corsair SSD, Corsair H110i water cooling  and PSU etc ...  8)

In fact this rig is so fast that even stutter can't catch me up now ...!  :D

If somebody has best 970 NVidia settings to share, I am ready to give them a try ...  ;)
Title: Re: Nvidia settings for GE Force GT 710?
Post by: bobkerman31 on February 25, 2018, 06:08:45 PM
Right!! Mick, ya i moved from a 745oem off a acer pc.. stupid idea hahaha. I got it to play more ksp then moved to flight sims and thats when i got the 970 and ya it was night and day for me too. To be honest when doing my research the config setting is the one off the forum post all about the config and that works well now the nvidea inspector is where i did most of my fiddling around. I focused on the vp mod first because VP put forth the effort to make his mod run smooth as butter ;), After I had the settings perfect in that i just copied over to all my other il2 1946 modded game hsfx, dbw, and the es3 mod and they all ran great for me. Then came B.A.T and that is a different story due to the errors that build up but the jet age, rise of flight, and the golden age work well but W.A.W I can never run full campaigns which is fine cause V.P runs them great. I use W.A.W when I want to test fly stuff and fly planes that are not in the others.

                                                                                                                                                                                                sincerly, Bob
 
Title: Re: Nvidia settings for GE Force GT 710?
Post by: Mick on March 01, 2018, 07:22:44 AM
... just found Mike's best settings for a GTX 970 ...  8)

https://www.sas1946.com/main/index.php/topic,9756.msg633205.html#msg633205