Special Aircraft Service

Individual Mod Downloads for IL-2 1946 => Aircraft => USSR_Singles => Topic started by: SAS~CirX on August 25, 2009, 01:57:57 PM

Title: LaGG3 series1, 11, opening canopies for all LaGGs + more [4.09] [4.12]
Post by: SAS~CirX on August 25, 2009, 01:57:57 PM
(http://storebror.it.cx/sas/archive/sasdl/SASMODS/laggpack1.jpg)

This is based on the canopy mods from Avia by Vert ,LaGG-3 new series and armaments are by RUDY, new 3D models are by Ivan750C6. Please let me  know who else worked so I can give correct credit!

This mod consists of 4 parts. 3 parts are opening canopies for all the Lavochkin Fighters except the rockets, by Vert. These now also have tweaked Reticles, Extended Masks, and New POV's which include the "taxi" view, that you can access when the canopy is open, by pressing the same key as for the raised seat in carrier planes. This last stuff is all by me.

(http://storebror.it.cx/sas/archive/sasdl/SASMODS/laggpack2.jpg)

The remaining part of the mod is new Slot LaGG 3 series 1 and series 11 new slot planes. I gave them opening canopies also, and I gave the LaGG3 series 1 its own FM ( a placeholder for now). The series11 already had it's own FM.

Thus you will need united buttons v0.04 or later for the new planes in this mod!
Download the LaGG Pack (http://storebror.it.cx/sas/archive/sasdl/SASMODS/LaGG_Pack.7z)

Put the parts you want in your mods folder, and add the lines to your air ini for the planes you want:

air.ini

LaGG-3series1     air.LAGG_3SERIES1 1                           r01   SUMMER
LaGG-3series11    air.LAGG_3SERIES11 1                          r01   SUMMER


plane.ru


LaGG-3series1        LaGG-3, 1941 (1 series)
LaGG-3series11       LaGG-3, 1941 (11 series)


weapon.ru

#####################################################################
# LaGG-3series1
#####################################################################
LaGG-3series1.default                   Default
LaGG-3series1.2xFAB50                   2xFAB-50
LaGG-3series1.2xDROPTANK                2x80l. Droptanks
LaGG-3series1.none                      Empty

#####################################################################
# LaGG-3series11
#####################################################################
LaGG-3series11.default                  Default
LaGG-3series11.8xRS82                   8xRS-82
LaGG-3series11.6xRS132                  6xRS-132
LaGG-3series11.2xFAB100                 2xFAB-100
LaGG-3series11.kinderwud                1xNose VYa-23
LaGG-3series11.kinderwud_8xRS82         1xNose VYa-23 + 8xRS-82
LaGG-3series11.kinderwud_6xRS132        1xNose VYa-23 + 6xRS-132
LaGG-3series11.kinderwud_2xFAB100       1xNose VYa-23 + 2xFAB-100
LaGG-3series11.none                     Empty


(thanx Walter!)

S!
CirX


For a LaGG-3 Sh-37 41 and 42 open canopy see reply #24,
for a La-7R open canopy see reply #30 in this thread.
Thanks to Guzknife and Karabas.  ;)




Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: Whiskey_Sierra_972 on August 26, 2009, 02:20:27 AM
Hi mates!

If someone like can add those lines that works quite well!!

air.ini

LaGG-3series1     air.LAGG_3SERIES1 1                           r01   SUMMER
LaGG-3series11    air.LAGG_3SERIES11 1                          r01   SUMMER


plane.ru


LaGG-3series1        LaGG-3, 1941 (1 series)
LaGG-3series11       LaGG-3, 1941 (11 series)


weapon.ru

#####################################################################
# LaGG-3series1
#####################################################################
LaGG-3series1.default                   Default
LaGG-3series1.2xFAB50                   2xFAB-50
LaGG-3series1.2xDROPTANK                2x80l. Droptanks
LaGG-3series1.none                      Empty

#####################################################################
# LaGG-3series11
#####################################################################
LaGG-3series11.default                  Default
LaGG-3series11.8xRS82                   8xRS-82
LaGG-3series11.6xRS132                  6xRS-132
LaGG-3series11.2xFAB100                 2xFAB-100
LaGG-3series11.kinderwud                1xNose VYa-23
LaGG-3series11.kinderwud_8xRS82         1xNose VYa-23 + 8xRS-82
LaGG-3series11.kinderwud_6xRS132        1xNose VYa-23 + 6xRS-132
LaGG-3series11.kinderwud_2xFAB100       1xNose VYa-23 + 2xFAB-100
LaGG-3series11.none                     Empty

cheers

walter
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: SAS~CirX on August 26, 2009, 04:31:26 AM
Thanx Walter!
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: GerritJ9 on August 26, 2009, 02:41:17 PM
Just tested the LaGG canopies- very nice indeed, only the LaGG-3RD, La-7R and Kojedub La-7's canopies don't work- presumably not included so no worries.
Now replacing the LaGG-3 series 1 and 11 from a Russian pack with these new files, then testing!
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: GerritJ9 on August 27, 2009, 01:46:58 AM
There is a LaGG-3 series 8 available from aviaskins.com, on this page: http://forum.aviaskins.com/showthread.php?t=382&page=5. (http://forum.aviaskins.com/showthread.php?t=382&page=5.)
For those who have downloaded it, here are the translations-

for air.ini:

LaGG-3series8     air.NW_LAGG_3SERIES8 1                        r01    SUMMER

for plane_ru:

LaGG-3series8        LaGG-3, late 1941 (8 series)

for weapons_ru:

#####################################################################
# LaGG-3series8
#####################################################################
LaGG-3series8.default                         Default
LaGG-3series8.2xFAB100                      2xFAB-100
LaGG-3series8.8xRS82                         8xRS-82
LaGG-3series8.ShVAK                          ShVAK nose cannon
LaGG-3series8.ShVAK_2xFAB100            ShVAK + 2xFAB-100
LaGG-3series8.ShVAK_8xRS82               ShVAK + 8xRS-82
LaGG-3series8.none                             Empty

Have fun!
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: Uzin on August 27, 2009, 04:28:54 AM
Tried it, very useful fulfillment. It would be very nice if this bird (LaGG3 series 8 ) will have also the opening canopy , like other SAS~CirX's  LaGGs.
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: GerritJ9 on August 27, 2009, 04:50:23 AM
I've also translated the rest of the Readme:

"LaGG-3 series 8
FM of series 4, 3D of series 29
Standard carries nose-mounted VYa-23 cannon"   
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: LAL_R One on September 02, 2009, 12:15:10 PM
Thanks !!!

GREAT additon to IL2 ...
All plane should have the opening canopy and the special taxing view !!!!

Bye !

Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: Jiver67 on November 19, 2009, 06:25:06 PM
Awesome CirX....you're the man!!!
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: SAS~Malone on November 19, 2009, 10:15:18 PM
zaelu, also remember the amount of work involved in checking for online compatibility is quite massive, and i don't think any of us offliners are going to dedicate that amount of time to ensuring online compatibility. we leave that to the boffins of the online crowd.  ;)
hopefully, as you mentioned, they are being fixed one by one......eventually it will all be working fine, i'm sure.......i just doubt it'll be done here first.... 8)
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: AkeR on November 19, 2010, 09:51:09 AM
I've been created an alternative reticle for this MOD, if you want you can have it!

(http://www.sas1946.com/images/imageshit/dead/dead.gif)

Get it (http://www.filefront.com/17533111/Ru_Reticle.zip) Preview (http://www.sas1946.com/images/imageshit/img14/2629/screenshotip.jpg)
Reticle.tga (http://www.filefront.com/17535591/Reticle.tga) (glows much better)

Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: FANATIC MODDER on November 19, 2011, 05:25:26 AM
According to the book "LAGG FIGHTERS in action" :

The lower balance weight was deleted from the series 4, so it shouldn't be there in the first place. No rockets (but they were field mods to carry them in a later date). The radiator shape should be the same as series 1. The antenna mast is the higher, the one of the later series. Usually the earlier, shorter antenna mast and the lower balance weight are combined in some (according to the book) "very early series 4" planes. A thought: These planes were in fact series 3 LaGGs, having the rest of the series 4 improvements (SHVAK cannon, M-105PA engine etc.). There is no mentioned in the book about series 2 & 3, they are just bypassed.

The series 8 should have the new sleeker nose, without the SHKAs machine guns, but still retain the old exhausts and rudder of the series 4.

The series 11 was almost identical with the series 8, apart from the different loadout, with provision for rockets and the new rear radiator shape (the one that in IL-2 we see in series 4,29,66)

The new rudder/tail was installed in the 23rd series, but the old exhaust (together with the M-105PA engine and the exhasut shield) was retained.

The LaGG-3IT was the series 34.

Finally, it seems that the 3D models of series 29.35, 66 are accurate.

---------------------------------------------------------------------------------------------

Production dates -
LaGG-3 1 series Jan. 1941
LaGG-3 4 series July 1941
LaGG-3 11 series Jan. 1942
LaGG-3 23 series somewhere around march/april 1942
LaGG-3 29 series June 1942
LaGG-3 35 series Aug. 1942
LaGG-3 66 series March 1943

Last LaGG-3 produced - February 1944

Most produced series - there is no such data in the book but it's clearly stated that there was a continuous to increase production until late 1942. That would do series 11, 23 & 35 the most common. Series 66 is a bit particular situation since it was in production only in Georgia, in a much slower rate and all of their production was absorved as replacement to existing LaGG-3 units.In fact, as I read in a AEROPLANE article, series 66 was more of a Gudkov product. 

Replaced: Not only by La-5, but very frequently by Yak-3. In fact the introduction of Yak-3 with the massive withdraw of LaGG-3 from front line units happened in the same timeframe, so that makes sense.

-----------------------------------------------------------

Conclusion that has to do with IL-2 campaign building

There is a gap regarding the 1st half of 1942. I hope that a - correct - series 11 will be re-introduced in a future UP/DBW release.



Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: Karabas-Barabas on November 20, 2011, 07:03:09 AM

Production dates -
...
LaGG-3 4 series July 1941

 ?
    5 series June 1941, 8 series Aug. 1941

LaGG-3 11 series Jan. 1942

 ?
     10 series Sep. 1941
     15 series still 1941
     Jan. 1942 ~ 16-17 series

In the summer 1941 let out on 6 planes a day = ~ 2 series  in a month

Machine guns ShKAS weren't established about 75 planes of 7 series

Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: FANATIC MODDER on November 21, 2011, 03:38:30 AM
As you understand I am trying to help. I am sure that since LaGG-3 was a Soviet plane, Russian sources are more accurate. Now about production peak, I read somewhere else that production peak was reached in May 1942 and stayed steady until November of that year. By May 1942 LaGG-3s were the 35% of all fighters in service, but this percentage falled after that date (increased Yak-7 production and more lend lease fighters I suppose).

Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: Karabas-Barabas on November 22, 2011, 12:13:35 AM
As you understand I am trying to help. I am sure that since LaGG-3 was a Soviet plane, Russian sources are more accurate. Now about production peak, I read somewhere else that production peak was reached in May 1942 and stayed steady until November of that year. By May 1942 LaGG-3s were the 35% of all fighters in service, but this percentage falled after that date (increased Yak-7 production and more lend lease fighters I suppose).

New archives open, there is new, more exact information.
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: jg1234 on August 09, 2012, 08:27:50 AM
Hi Folks,

I am a little new to adding mod files/folders. I am running IL2 1946 v4.101 with Modact 3.06 installed and nothing else. Here is my question.

I have downloaded and extracted the folders. My goal is to make the canopy on the LA5FN open. I see the "0Canopy_la-5" folder.

Where / How do I install that ?  Also - do I need to update anything in my air.ini file ?

Any insight or info is greatly appreciated.

Thanks - jg1234
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: LuseKofte on August 09, 2012, 08:33:32 AM
This is a 4.09 mod , and it is suppose to work if you put the file in your MOD (#SAS) folder. Make sure you got it with right folder deapth.
it should be IL2 folder\MOD\The mod you install\3do or classfiles or similar.
It is quite possible this mod does not work in 4.101. You must add the air.ini files that is written in first post
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: jg1234 on August 09, 2012, 08:54:33 AM
SAS~Le0ne,

Thank you very much for the quick reply and all the good information.

What you said makes sense. I will install this tonight. Thanks also for letting me know about the air.ini entries. They all had LaGG-3 in the lines so I wasn't sure.

Cheers - jg1234
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: jg1234 on August 12, 2012, 01:16:30 AM
I was able to get the LA5FN canopy open using this mod and version 4.10.1 with no problem.

Thanks to those involved with making this and the great info I received in this thread.

This is great stuff.

Cheers - jg1234
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: Kikka on August 14, 2012, 08:28:54 AM
Just a helpful hint.  DGEN may not find these new Lagg3s if they're merly put in Europlanes.dat, though I had no problem with Series 1 in Lvov41, Barbarossa, Crimea41 or Typhoon.  You'll have to make a separate XXXplanes.dat file for every other map you put these planes in (e.g. Crimea42planes.dat, Kuban42planes.dat etc.).  Just make copies of your Europlanes.dat file, with the appropriate mod planes added, and rename them.
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: BravoFxTrt on August 16, 2012, 07:52:32 PM
They do work in DBW 4.10.1  :)
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: SAS~Epervier on August 17, 2012, 02:04:31 AM
This Mod has been three years now and I rediscovered it.
But it is especially now that I discover that the "opencanopy" of this Mod is not included in the UP2.01!
It covers only 2/3 planes contained in UP2.01 but it is simple to adapt it to missing planes.

So very late ... thank you for this high quality work!  :) :)
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: BravoFxTrt on August 17, 2012, 10:23:31 AM
Hear hear, my sentiments as well, very classy job on these great birds :). Now we need the PA_Jeronimo touch for the spinners. ;)
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: Max Batov on August 21, 2012, 05:15:59 AM
Hello Guys !

I'd like to ask, is there any 3d fix to smoothen cockpit frames for Lagg and La fighters ?
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: GUZKNIFE on July 09, 2013, 02:08:04 PM
This Pack works in 4.12

Update! LaGG-3 Sh-37 41 and 42 years  - http://www.mediafire.com/download/6wam5ekn6e0joe6/LaGG-3_37.rar
Author- Karabas-Barabas! This Pack works in 4.12 SAS ModAct 5.11  :) Thank you!
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: BravoFxTrt on November 22, 2013, 04:33:32 AM
They didnt work for me in SAS MA 5.3, No show in QMB.


Code: [Select]
INTERNAL ERROR: Can't open file '3do/plane/LaGG-3series11/CF_D0.msh'
WARNING: object '3do/plane/LaGG-3series11/CF_D0.msh' of class 'SkinTL' not loaded
INTERNAL ERROR: MeshObj: Can't load mesh 3do/plane/LaGG-3series11/CF_D0.msh
WARNING: object '3do/plane/LaGG-3series11/hier_Sh37.him' of class 'HIM' not loaded
INTERNAL ERROR: HierMeshObj: Can't load HIM 3do/plane/LaGG-3series11/hier_Sh37.him
INTERNAL ERROR: HierMeshObj: Can't load HIM 3do/plane/LaGG-3series11/hier_Sh37.him

java.lang.RuntimeException: INTERNAL ERROR: HierMeshObj: Can't load HIM 3do/plane/LaGG-3series11/hier_Sh37.him
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: Semor on November 22, 2013, 06:53:30 AM
Hi

Please.Can somebody provide a mirror to another hoster from the Original Link from Page one? I cant download from it.

 thanks  ;)
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: andrew93 on August 16, 2014, 12:26:43 PM
thank u ))
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: andrew93 on August 16, 2014, 12:40:54 PM
I really love LaGG-3, dont know why )) its feels so cozy for me )) and what I really needed - the opening canopy ability ))

but, there's one bug - my wingman has a trouble while preparing to take off - his plane noses over when his speed 0 km/h ))
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: Pockrtplanesairways on September 25, 2014, 06:21:54 PM
Doesn't Modact 5.03 already have buttons v0.04?
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: GUZKNIFE on November 04, 2014, 08:54:10 AM
Open canopies  La-7R!Tested in 4.12.2 SAS ModAct 5.30 successfully! :)
http://forum.aviaskins.com/showpost.php?p=132103&postcount=27
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: SAS~Gerax on November 04, 2014, 10:57:34 AM
many thanks Guzknife, I add a info to first post.  ;)
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: CzechTexan on October 04, 2018, 04:13:16 PM
This Pack works in 4.12

Update! LaGG-3 Sh-37 41 and 42 years  - http://www.mediafire.com/download/6wam5ekn6e0joe6/LaGG-3_37.rar
Author- Karabas-Barabas! This Pack works in 4.12 SAS ModAct 5.11  :) Thank you!
This link does not work.  ::(
I just discovered the history of this early 37mm-armed type. http://massimotessitori.altervista.org/sovietwarplanes/pages/lagg3/lagg3-37/lagg3-37.htm
I've always liked the LaGG (probably because of its underdog bad reputation) so I like the story of it with a 37mm.
Can someone update this with a new link?
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: henkypenky on October 05, 2018, 03:21:35 AM
There you go m8; http://www.mediafire.com/file/17l77nvh33jku7w/L_ac_LaGG-3_37.rar/file Works in #SAS, just renamed for sorting order.

Download link unoperable, see reply #45
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: CzechTexan on October 05, 2018, 08:57:39 AM
There you go m8; http://www.mediafire.com/file/17l77nvh33jku7w/L_ac_LaGG-3_37.rar/file Works in #SAS, just renamed for sorting order.
Thank you very much, henkypenky!  Flies in my
4.12/5.3 but it's too bad that the canopy does not open.
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more [4.09] [4.12]
Post by: Uzin on October 07, 2018, 12:29:52 PM
@ henkypenky and CzechTexan:
The plane does nor appear neither in 4.12/5.30 nor in 4.13.4/6.40.
Game runs,  this particular plane is listed in menu but is absent both in QMB and in FMB.
What to do with files in cod folder, please?
Delete "minuses"?
Or what else, please?
Or rename the folder L_as_LaGG-3_37 into LaGG-3_37
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more [4.09] [4.12]
Post by: CzechTexan on October 07, 2018, 07:00:38 PM
hi Uzin.
Just to be clear to everyone who might casually come across our discussion...this is about the 37mm-armed early LaGG found here:   http://www.mediafire.com/file/17l77nvh33jku7w/L_ac_LaGG-3_37.rar/file
It is different from the LaGG series 1 and 11 which are the main topic of discussion found in the first post on page 1.

Ok, Uzin, I think this mod needs to have the LaGG series 11 mod installed, although I could be wrong.
Do you have it?
I had no problem installing and did not change anything.  Inserting the lines of text which Henkypenky so generously provided was simple.
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: Uzin on October 08, 2018, 03:05:36 AM
hi Uzin.
Just to be clear to everyone who might casually come across our discussion...this is about the 37mm-armed early LaGG found here:   http://www.mediafire.com/file/17l77nvh33jku7w/L_ac_LaGG-3_37.rar/file
It is different from the LaGG series 1 and 11 which are the main topic of discussion found in the first post on page 1.

Ok, Uzin, I think this mod needs to have the LaGG series 11 mod installed, although I could be wrong.
Do you have it?
I had no problem installing and did not change anything.  Inserting the lines of text which Henkypenky so generously provided was simple.
You are right, after installing the whole pack, LaGG-3 37 appears,
BUT takeoff is hindered by burying the tail of the plane into the ground see pics:

(https://i.postimg.cc/WpY47FLw/Clipboard.jpg)

This occurs bot  in 4.12.2/5.30 and in 4.13.4/6.40.
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: henkypenky on October 08, 2018, 03:18:06 AM
Morning, Czech is right, you need the Series 1 & 11 to have the Lagg 3-37 active. Can't say anything on the tailwheel, mine is ok. L-ac- addition was for sorting purposes.
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: Uzin on October 08, 2018, 03:27:13 AM
Morning, Czech is right, you need the Series 1 & 11 to have the Lagg 3-37 active. Can't say anything on the tailwheel, mine is ok. L-ac- addition was for sorting purposes.
Thanks, I have not the Series 1 and 11 active. Where to find it, please?
EDIT:
Series 1 and 11 installed, appear and take off OK, but series 37 still has tail buried.

Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: CzechTexan on October 08, 2018, 08:14:55 AM
Morning, Czech is right, you need the Series 1 & 11 to have the Lagg 3-37 active. Can't say anything on the tailwheel, mine is ok.
Series 1 and 11 installed, appear and take off OK, but series 37 still has tail buried.
uh, both my early LaGG-3-37s also have tails buried in the runway.  Previously, I was only using airstarts in the QMB so I did not see that.  There's got to be an easy fix for this, right?
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: henkypenky on October 08, 2018, 12:47:29 PM
O, I checked with a scramble mission and, sorry my series 37 also have their tails buried.
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: henkypenky on October 09, 2018, 02:22:11 PM
Good news, I've compared the hier.him from the 'original' series 11 and the one from the series 37. Than added the names of the serie 37 meshes to the serie 11 file and it works!  :)  :)       
The new hier.him can bedownloaded at: http://www.mediafire.com/file/n12gzo5mawbr8rw/hier_Sh37.HIM/file back up your original - just in case - and put the new one in that's all.
Probably a typo in the hier_Sh37

Download link unoperable, see reply #45
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more [4.09] [4.12]
Post by: Uzin on October 09, 2018, 04:00:41 PM
Many thanks, henkypenky!
The planes are now taking off OK.
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: CzechTexan on October 09, 2018, 04:33:47 PM
Awesome!  Thanks for the work henkypenky!  You deserve a Workers Medal for this.
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: henkypenky on October 10, 2018, 03:00:12 AM
Ok, thanks guys, new download link for complete plane: http://www.mediafire.com/file/grcldkggoblxxjn/ac_LaGG-3_37.rar/file  Previous links unoperable
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more [4.09] [4.12]
Post by: CzechTexan on October 11, 2018, 05:44:59 PM
I really like this LaGG with the 37mm cannon. 
No more tail dragging, thanks to henkypenky.
Here's one with a new skin based on a Pilawskii drawing of the LaGGs built at Zavod 23 in Leningrad before the factory was forced to move.
(https://farm2.staticflickr.com/1935/30295317707_5722b3cee3_b.jpg)
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: FANATIC MODDER on October 14, 2018, 06:26:17 AM
Ok, thanks guys, new download link for complete plane: http://www.mediafire.com/file/grcldkggoblxxjn/ac_LaGG-3_37.rar/file  Previous links unoperable

Thank you very much, it works perfectly.
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more [4.09] [4.12]
Post by: FANATIC MODDER on October 14, 2018, 06:27:18 AM
There is a LaGG-3 series 8 available from aviaskins.com, on this page: http://forum.aviaskins.com/showthread.php?t=382&page=5. (http://forum.aviaskins.com/showthread.php?t=382&page=5.)
For those who have downloaded it, here are the translations-


link is dead....can you re-upload it please?
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more [4.09] [4.12]
Post by: CzechTexan on October 16, 2018, 06:18:22 PM
There is a LaGG-3 series 8 available from aviaskins.com, on this page: http://forum.aviaskins.com/showthread.php?t=382&page=5. (http://forum.aviaskins.com/showthread.php?t=382&page=5.)
For those who have downloaded it, here are the translations-


link is dead....can you re-upload it please?

Here is the series 8
Download: http://www.mediafire.com/file/eiapevadjaehbvj/LaGGseries8_reupload.7z/file
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more
Post by: FANATIC MODDER on October 17, 2018, 01:13:27 PM
Thank you!!!
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more [4.09] [4.12]
Post by: Uzin on October 17, 2018, 02:23:17 PM
Hi, all LaGG3 lovers!
Are there any comparisons of FM of particular series, as implemented  in our beloves Il-2, please?
Title: Re: LaGG3 series1, 11, opening canopies for all LaGGs + more [4.09] [4.12]
Post by: CzechTexan on October 19, 2018, 05:12:06 PM
Hi, all LaGG3 lovers!
Are there any comparisons of FM of particular series, as implemented  in our beloves Il-2, please?
Well, the way I understand it, it seems the modders just used combinations of the series 4 and series 29 planes and used those FMs.  You can read about it on the Aviaskins forum.

On a different note, I'm making missions with LaGGs and I wonder if I should use the series 8 or go with the series 4 & 11.