Special Aircraft Service

Individual Mod Downloads for IL-2 1946 => Other Mods => Ships => Topic started by: western0221 on March 18, 2012, 02:49:49 AM

Title: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10) [4.10] [4.11] [4.12]
Post by: western0221 on March 18, 2012, 02:49:49 AM
USS Essex class aircraft carrier after SCB-125 modernization with angled deck.
This MOD original 3D and armaments are made by Diving_Hawk.
Diving_Hawk's WIP topic is here http://www.sas1946.com/main/index.php/topic,19915.0.html

version2.02 download http://www.adrive.com/public/MfEzcM/Essex1960Pack2.02.7z
(version1.0x had serious bugs around Guns, version2.00 fix them.)
(version2.02 clean-up duplicated files, you have to erase old folder completely before 2.02 installing)
editor note - alternate mediafire link at bottom of this post

(http://www.hiyohiyo.info/~riorio/il2/20120307EssexSCB125comp.jpg)

Ships list
- USS Essex CV9 /1957
- USS Essex CV9 /1965
- USS Yorktown CV10 /1956
- USS Intrepid CV11 /1957
- USS Intrepid CV11 /1970
- USS Hornet CV12 /1957
- USS Hornet CV12 /1970
- USS Ticonderoga CV14 /1962
- USS Randolph CV15 /1957
- USS Randolph CV15 /1962
- USS Lexington CV16 /1958
- USS Hancock CV19 /1957
- USS Hancock CV19 /1968
- USS Kearsarge CV33 /1965
- USS Oriskany CV34 /1965
- USS Oriskany CV34 /1970
- USS Shangri La CV38 /1955
- USS Shangri La CV38 /1970

(http://www.mediafire.com/imgbnc.php/b7d4942ebb6d5923cb599225b8eb323e5e0970500b07360532f4a7f1f4804fc06g.jpg)
(http://www.mediafire.com/imgbnc.php/459b1482d2a78b149c82f944d853fc9975db04ae91251dcbc0d93dbadb7f9fac6g.jpg)

This pack needs Ship Extention 2.11 http://www.sas1946.com/main/index.php/topic,18742.0.html for full functions.
UP3RC4 isn't compatible to Ship Extention 2.11, in limited functions (without rotating radars) you can use this pack in UP3RC4.

And this Essex SCB-125 has Catapults , latest version SAS Engine MOD needed.

For only UP3.0RC4 , use this Catapult MOD.
http://www.sas1946.com/main/index.php/topic,20102.msg220487.html#msg220487 (UP3.0RC4 = Reply #78 at Page7)
Only UP3RC4 is 27th Dec. 2011 version is latest and some functions limited.

 * * * * *

How to use catapults?

1. install latest Catapult MOD(Carrier MOD)

2. You have to taxi you airplane from spawning point to the catapult starting point and push "Toggle Chocks" key, then airplane will be set on the Catapult.
After you make full-throttle, push "Toggle Chocks" key again, the catapult pushes your aircraft to take-off.

3. When you enable "Carrier Take-off MOD", AI airplanes jump to the catapult starting point, not taxi.

(20/01/16) - alternate mediafire link by SAS~Malone:   https://www.mediafire.com/?233pr9cankd3qwq
Title: Re: USS Essex SCB-125 angled deck pack ver1.00
Post by: Whiskey_Sierra_972 on March 18, 2012, 06:00:51 PM
Great work mates!!

As olways you are a great , rugged and appreciated shipyard!!!

All the best!!

walter
Title: Re: USS Essex SCB-125 angled deck pack ver1.00
Post by: ggrewe on March 25, 2012, 11:12:20 AM
Fantastic work Western – thanks very much. :)
Was a bit daunted by the scale of this mod – but pretty straight forward installation.
Your instructions are very good – considering you do not speak English & use a translator.  ;)
Title: Re: USS Essex SCB-125 angled deck pack ver1.00
Post by: Ala13_ManOWar on March 25, 2012, 04:00:16 PM
Really nice, thank you ;).

S!
Title: Re: USS Essex SCB-125 angled deck pack ver1.00
Post by: The_Alaska_Man on March 25, 2012, 11:18:13 PM
Thanks for this
Title: Re: USS Essex SCB-125 angled deck pack ver1.00
Post by: NS~mati140 on March 29, 2012, 09:50:07 AM
Nice... Finally proper bridge area, it looks outstanding. I have some strange things to report though:

Note: I'm using DBW 1.71

1. Do the SAMs on the bridge area actualy work at the moment? Do they require any aditional mods to work? Is there a maximum target's aproach speed? Bc I made a mission with a squad of MiG-17s aproaching USS Essex late (1965) and they didn't fire even once.

2. Do all catapults work ATM? I noticed that catapults on USS Oriskany 1970 are dead. Don't know how about other new models yet

EDIT: Note I have installed ShipExt 2.10, AI, Engines and Hotkeys v2.5 and Carrier TO mod v 5.7.2 but it didn't change anything to the above.
Title: Re: USS Essex SCB-125 angled deck pack ver1.00
Post by: western0221 on March 29, 2012, 10:16:40 AM
1. Do the SAMs on the bridge area actualy work at the moment? Do they require any aditional mods to work? Is there a maximum target's aproach speed? Bc I made a mission with a squad of MiG-17s aproaching USS Essex late (1965) and they didn't fire even once.

Essex class didn't have any SAMs.
So, this MOD Essex ships don't have SAMs.

2. Do all catapults work ATM? I noticed that catapults on USS Oriskany 1970 are dead. Don't know how about other new models yet

DBW1.71 has this class catapult codes.
But because of a bug , those codes don't work.
For fixing is here ;)
And this Essex SCB-125 has Catapults , but they work on only this new Catapult MOD.
http://www.sas1946.com/main/index.php/topic,23327.0.html (DBW1.71 / SASModAct3 with Jetwar ver1.2).
Title: Re: USS Essex SCB-125 angled deck pack ver1.00
Post by: NS~mati140 on March 29, 2012, 10:22:24 AM
1. So, what are those things at the frontal and back side of the bridge? I noticed they turn into enemies' direction when they aproach.
   BTW, are you sure that late (1970) of them didn't have SAMs?

2. Read edit: I installed it but it didn't help - those that worked work, and those that didn't don't work.

EDIT: It seems to work now, I must have done something wrong before
Title: Re: USS Essex SCB-125 angled deck pack ver1.00
Post by: western0221 on March 29, 2012, 10:55:57 AM
1. So, what are those things at the frontal and back side of the bridge? I noticed they turn into enemies' direction when they aproach.
   BTW, are you sure that late (1970) of them didn't have SAMs?

The things at the frontal and back side of the bridge are AAA targeting room.
They are not new ones, I think.
Basic rooms are WWII time ones with new antennas.
Daidalos Essex/Intrepid have similer ones.

I read "Weyer's Warships of the World 1984/85",
Hornet and Bennington as CVS, Lexngton as AVT, Bon Homme Richard and Oriskany as CV, all had no SAMs.
Coral Sea didn't have, too.
Midway or Forrestal class had Sea Sparrows.
Title: Re: USS Essex SCB-125 angled deck pack ver1.00
Post by: duffys tavern on March 29, 2012, 06:58:35 PM
Served onboard Oriskany '63-'65. Only thing we had... eight -5" 38s. Later, in dry dock in,  Bremerton,Wa, four were removed. Served onboard America '66 - '67, as I remember, she had missiles.
Title: Re: USS Essex SCB-125 angled deck pack ver1.00
Post by: farang65 on March 29, 2012, 09:33:08 PM
Thanks greatly Western  ;D

Now we have some awesome 60's aircraft carriers  ;D :D

I'll really have to learn how to use that catapult mod  :-[

Thanks again for the awesomeness  ;D

Kirby
Title: Re: USS Essex SCB-125 angled deck pack ver1.00
Post by: Kazegami on March 31, 2012, 04:03:42 PM
Bit of a problem...
(http://oi44.tinypic.com/wgvn9z.jpg)
Title: Re: USS Essex SCB-125 angled deck pack ver1.00
Post by: NS~mati140 on March 31, 2012, 04:12:13 PM
It was mentioned in first post that you should install Carrier take off 7.5.2. It helped for me.
Title: Re: USS Essex SCB-125 angled deck pack ver1.00
Post by: Kazegami on March 31, 2012, 04:29:50 PM
Ok, thanks. Translated English is a bit hard to understand :P

Edit: I tried it, still same problem.
Title: Re: USS Essex SCB-125 angled deck pack ver1.00
Post by: Plowshare on April 01, 2012, 07:43:24 AM
Kazegami:

What mod are you using to get the text on the lower left of the screen above the Speed Bar? Is this mod usable with DBW Build 1.71?

Without working instruments on the Phantom this would be critical information I could use.

Bob
Title: Re: USS Essex SCB-125 angled deck pack ver1.00
Post by: Kazegami on April 01, 2012, 10:54:52 AM
Plowshare, yes, I'm using it with DBW 1.71.
Here it is: http://www.sas1946.com/main/index.php?topic=15931.msg212465#msg212465
The link on the first page is broken. Use Uzin's link.
Also, you cannot use the first two ctrl+f1 views with this mod, the game will freeze until you press it again. Hope this makes sense  :-\
Title: Re: USS Essex SCB-125 angled deck pack ver1.00
Post by: Plowshare on April 01, 2012, 01:04:48 PM
Kazegami:

Thanks for the link. DL'd, installed and it works.

Now to let this topic get back on topic...

Bob
Title: Re: USS Essex SCB-125 angled deck pack ver1.01
Post by: western0221 on April 02, 2012, 07:37:06 AM
In detail, around 1960's some Essexes were replaced 40mm Boforse to 3inch AAA, and that 3inch AAA were removed around 1970.

But my WIP topic, no one requested that modelizing, I don't modelize that.
I have less data about that AAA replacing when / which ship done.

About SAMs the same. No one requested.
Title: Re: USS Essex SCB-125 angled deck pack ver1.01
Post by: hanspeterii on April 02, 2012, 11:31:06 AM
Great mod guys, thanks  :)

But are the deck textures meant to be so low res?
Title: Re: USS Essex SCB-125 angled deck pack ver1.01
Post by: western0221 on April 02, 2012, 11:39:13 AM
But are the deck textures meant to be so low res?
That discussion was many times done in WIP topic.
IL-2 1946 graphic engine can draw 1024x1024 or 2048x512 textures biggest.
Now I use 2048x512 texture for whole deck.
It is the limit.

When I separate the deck face into 4x and using 1x 2048x512 texture for new 1 face,
I can make more high resolution,
but that is very hard work to draw textures for us and MOD folder size will be 4x (Pack total 2.5GB).
Is it useful or realistical?
Title: Re: USS Essex SCB-125 angled deck pack ver1.01
Post by: BOYAN on April 03, 2012, 12:12:13 PM
Hello mr. Western, great job on the textures... I was wondering if you or somebody else
would be willing to create a set of post war and Korean war era Essex class ships with high res textures?

Valley Forge and Boxer are low texture, right? Also, Its hard to find good color images of those ships, deck color
especially. Aren`t they a little too brown in current state?

Some images of Valley Forge and Boxer

http://www.navsource.org/archives/02/024535.jpg
http://www.navsource.org/archives/02/024534.jpg
http://www.navsource.org/archives/02/024502.jpg
http://naval.aviation.museum/emuwebdoncoms/objects/common/webmedia.php?irn=16006352&size=177x122&image=yes

Others:

http://www.navsource.org/archives/02/021144.jpg
http://www.history.navy.mil/photos/images/k16000/k17108.jpg
http://www.navsource.org/archives/02/0209af.jpg
http://www.history.navy.mil/photos/images/k16000/k18429.jpg




 
Title: Re: USS Essex SCB-125 angled deck pack ver1.01
Post by: hanspeterii on April 13, 2012, 04:02:14 PM
But are the deck textures meant to be so low res?
That discussion was many times done in WIP topic.
IL-2 1946 graphic engine can draw 1024x1024 or 2048x512 textures biggest.
Now I use 2048x512 texture for whole deck.
It is the limit.

When I separate the deck face into 4x and using 1x 2048x512 texture for new 1 face,
I can make more high resolution,
but that is very hard work to draw textures for us and MOD folder size will be 4x (Pack total 2.5GB).
Is it useful or realistical?

Sorry Western, I'm pretty new to Il-2 and modding, I can barely do Nosearts / skins I didn't know about that technical stuff. I don't think better textures would be worth the work. And I wouldn't want to have to download 2.5 GB neither, your mod is great the way it is  ;)
Title: Re: USS Essex SCB-125 angled deck pack ver1.01
Post by: Telmo on April 15, 2012, 10:43:04 AM
Hello Western. I have a litte problem. The version1.01 don't work for me. Could you give me the version 1.00 please :) ?
Thank you very much !
Title: Re: USS Essex SCB-125 angled deck pack ver1.01
Post by: western0221 on April 15, 2012, 11:13:20 AM
Hello Western. I have a litte problem. The version1.01 don't work for me. Could you give me the version 1.00 please :) ?
Thank you very much !
1.00 has a problem at Ship Extentions MOD 2.11 .

Oh...
Now I find another problem on 1.01 .
I will release 1.02 .

But I think that "don't work" is strange.
When you can't or don't like to install Ship Extentions MOD 2.11 , then you can use add.UP3RC4.ships.ini in 7zip.
Title: Re: USS Essex SCB-125 angled deck pack ver1.01
Post by: Telmo on April 15, 2012, 11:18:59 AM
All  essex class no longer appear when I run the game. I  use the last DBW. But I will try your solution.
Title: Re: USS Essex SCB-125 angled deck pack ver1.01
Post by: BT~Teacher on April 16, 2012, 07:01:18 AM
Bug report: Catapults don't work on UP3, even with Catapult MOD installed.
Title: Re: USS Essex SCB-125 angled deck pack ver2.00
Post by: western0221 on April 16, 2012, 07:31:22 AM
version2.00 is released in my 1st post.

version1.0x had serious bugs around Guns, version2.00 fix them.
Title: Re: USS Essex SCB-125 angled deck pack ver1.01
Post by: western0221 on April 16, 2012, 08:08:35 AM
Bug report: Catapults don't work on UP3, even with Catapult MOD installed.

That is Carrier MOD area, not in this MOD.

UP3 inhibit Carrier MOD installing , and sanka helped me at UP3.
But now sanka is very busy.

Or... you may ask UP staff to include latest Carrier MOD in UP3.
Title: Re: USS Essex SCB-125 angled deck pack ver2.00
Post by: Telmo on April 17, 2012, 08:36:00 AM
So I have a problem bigger than when I had version 1.01. When I made mission in FMB, the Essex Carrier appear. But when I launched the mission, it was not in the water.
Now with version 2.00, the problem is worst because my game crash at 70%. I have not installed the ship extended mod because I don't want. I  followed your instructions carrefully so I don't know where is the problem. I have DBW 7.1

I'm sad now because I only can take off with my F4 Phatom on the Clemenceau and Foch carrier.

Thanks to your help :)

Title: Re: USS Essex SCB-125 angled deck pack ver2.00
Post by: Whiskey_Sierra_972 on April 17, 2012, 09:09:53 AM
70% should be a wrong installation....check better the .ini entry you have added....moreover when I have some ship showing in FMB but not in mission this is also the cause!!!
Title: Re: USS Essex SCB-125 angled deck pack ver2.00
Post by: Telmo on April 18, 2012, 05:43:45 AM
Ok I will see it and I'll keep you current.
Title: Re: USS Essex SCB-125 angled deck pack ver2.00
Post by: Telmo on April 19, 2012, 09:15:43 AM
So I uninstalled everything and then I followed all the instructions again. Nothing helps, my game crash at 70%.

And I don't know why :(
Title: Re: USS Essex SCB-125 angled deck pack ver2.00
Post by: Whiskey_Sierra_972 on April 19, 2012, 09:25:27 AM
Did this mod load before the Clemenceau and Foch?

Maybe the some classfiles need a different loading order....
Title: Re: USS Essex SCB-125 angled deck pack ver2.00
Post by: Telmo on April 19, 2012, 09:54:18 AM
I don't know. But perhaps Western can give me an old version of the USS Essex. Like the version 12.
Title: Re: USS Essex SCB-125 angled deck pack ver2.00
Post by: Whiskey_Sierra_972 on April 19, 2012, 09:55:41 AM
Try to make it load before the Clemenceau changing it's name can be a solution....try it!
Title: Re: USS Essex SCB-125 angled deck pack ver2.00
Post by: Telmo on April 19, 2012, 10:27:29 AM
Sorry but I don't really understand how. I'm not an expert in hacking mod :(
Title: Re: USS Essex SCB-125 angled deck pack ver2.00
Post by: Whiskey_Sierra_972 on April 19, 2012, 11:15:48 AM
Simply change the name of the SCB mod folder making it load before the Clemenceau folder....
Title: Re: USS Essex SCB-125 angled deck pack ver2.00
Post by: Telmo on April 19, 2012, 12:16:51 PM
So... Now my game don't crash but I have the same problem with the version 1.01. The Essex appear in the FMB but when I launch the Mission, the carrier is not here.
And I swear I haven't forget something in the .ini .

Hahahaha I'm doomed !
Title: Re: USS Essex SCB-125 angled deck pack ver2.00
Post by: Riptide_One on April 21, 2012, 05:22:45 AM
western0221,

I have been testing V2.00 in DBW 1.7.1. I found that the Hornet 1970 does not show up in a mission I created in FMB. In that same mission the USS Kearsarge 1965 does show up. Note that I put the players plane on the Kearsarge.

Also, neither Hornet stationary ship can be inserted in the mission using FMB. The 1957 Intrepid stationary can be inserted but the 1970 version cannot. In the objects window, the 1970 Intrepid shows up as the Hornet.

I can't find any mistakes in the way I installed the angle-deck carriers. My logfile can be D/L at http://www.sendspace.com/file/bj9roh (http://www.sendspace.com/file/bj9roh) and it does show a number of internal errors, warnings and other such indicators of problems. The following are eight examples of the kind of error messages included in the logfile:

(1) "[9:35:45]   INTERNAL ERROR: HierMesh: Can't find chunk 'Head220_1_x'
[9:35:45]   Ship creation failure:
[9:35:45]   INTERNAL ERROR: HierMesh: Can't find chunk 'Head220_1_x'
[9:35:45]   
[9:35:45]   java.lang.RuntimeException: INTERNAL ERROR: HierMesh: Can't find chunk 'Head220_1_x'
[9:35:45]   
[9:35:45]      at com.maddox.il2.engine.HierMesh.ChunkFind(Native Method)
[9:35:45]      at com.maddox.il2.engine.HierMesh.chunkFind(HierMesh.java:285)
[9:35:45]      at com.maddox.il2.objects.ships.BigshipGeneric.initMeshBasedProperties(BigshipGeneric.java:2526)
[9:35:45]      at com.maddox.il2.objects.ships.BigshipGeneric.<init>(BigshipGeneric.java:2847)
[9:35:45]      at com.maddox.il2.objects.ships.ShipEssexs$USSEssexCV9_1960.<init>(ShipEssexs.java:58)
[9:35:45]      at com.maddox.il2.objects.ships.ShipEssexs$USSHornetCV12_1970.<init>(ShipEssexs.java:123)"

(2) "[9:35:45]   Mission: Can't create chief '2_Chief' [class:ships.ShipEssexs$USSHornetCV12_1970]"

(3) "[9:35:55]   INTERNAL ERROR: HierMesh: Can't find chunk 'GearC4_D0'
[9:35:55]   INTERNAL ERROR: HierMesh: Can't find chunk 'GearC5_D0'
[9:35:55]   INTERNAL ERROR: HierMesh: Can't find chunk 'GearC4_D0'
[9:35:55]   INTERNAL ERROR: HierMesh: Can't find chunk 'GearC5_D0' "

(4) "[9:35:56]   WARNING: Bad water if MapRID == 0
[9:36:04]   WARNING: Bad water if MapRID == 0
[9:36:11]   WARNING: Bad water if MapRID == 0
[9:36:20]   WARNING: Bad water if MapRID == 0
[9:36:20]   WARNING: Clear VBuf 261856
[9:36:20]   WARNING: Clear IBuf 508947"

(5) "[9:39:02]   WARNING: Bad water if MapRID == 0
[9:39:11]   ObjState.finalize: Object of com.maddox.il2.objects.ships.ShipEssexs$USSHornetCV12_1970 NOT destroyed"

(6) "[9:40:58]   SPAWN: Can't create Ship object [class:com.maddox.il2.objects.ships.ShipEssexs$USSHornetCV12_1970]
[9:40:58]   null"

(7) "[9:41:56]   SPAWN: Can't create Ship object [class:com.maddox.il2.objects.ships.ShipEssexs$USSIntrepidCV11_1970]
[9:41:56]   null"

(8) "[9:41:56]   WARNING: Bad water if MapRID == 0
[9:41:57]   INTERNAL ERROR: HierMesh: Can't find chunk 'Head69'
[9:41:57]   INTERNAL ERROR: HierMesh: Can't find chunk 'Head69'
[9:41:57]   
[9:41:57]   java.lang.RuntimeException: INTERNAL ERROR: HierMesh: Can't find chunk 'Head69' "

Also, how do you get the catapults to work on the angle-deck carriers? I was under the impression that all that was needed for a DBW 1.7.1 install was to adjust the names of the CarrierMod and CarrierTakeOff5.7.2.1 so that they appear as the first and second directory respectively in your Mods directory. While catapults work on the WW2 carriers, they do not work on the angle-decks.

Any help you can provide would be very much appreciated. These carriers look great and I congradulate all who were involved in creating them for their fine work :)!

Cheers,

Riptide
Title: Re: USS Essex SCB-125 angled deck pack ver2.00
Post by: western0221 on April 21, 2012, 07:14:27 AM
western0221,

I have been testing V2.00 in DBW 1.7.1. I found that the Hornet 1970 does not show up in a mission I created in FMB. In that same mission the USS Kearsarge 1965 does show up. Note that I put the players plane on the Kearsarge.

Also, neither Hornet stationary ship can be inserted in the mission using FMB. The 1957 Intrepid stationary can be inserted but the 1970 version cannot. In the objects window, the 1970 Intrepid shows up as the Hornet.

Ouch! That's my mistake at making 7zip archive.
Sorry!! and thanks your report.

I re-upload version 2.01 in my 1st post.
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: mojojojo on April 21, 2012, 07:41:15 AM
i installed this in DBW 1.71 and its really great!!!!
thx!!!!
;D
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Telmo on April 21, 2012, 10:40:37 AM
So I have installed the version 2.01 and it's the same. The ships appears on the FMB but when I launch the mission, the aircraft carrier does not appear.
This is my log file maybe you can help me with is.

Code: [Select]
Loading mission South Vietnam.mis...
Loaded camouflage: CBI
Loading map.ini defined airfields:
WARNING: ObjectVACache_Clear()
WARNING: * Buf0 : Obj: 48,  Vert 6015,  Ind 23493
WARNING: * Buf1 : Obj: 766,  Vert 66477,  Ind 131145
WARNING: * Buf2 : Obj: 0,  Vert 0,  Ind 0
Load bridges
Load static objects
sFMDir = l39n
s1 = flightmodels/ivchenkon.emd
s = FlightModels/IvchenkoN:L39N.emd
m_lastFMFile = l39a
getting fm file l39n
INTERNAL ERROR: Str2FloatClamp() - Clamped 0.15 -> 0.1 (delta = -0.05) to Range 0..0.1
INTERNAL ERROR: HierMesh: Can't find chunk 'SSC1'
Ship creation failure:
INTERNAL ERROR: HierMesh: Can't find chunk 'SSC1'

java.lang.RuntimeException: INTERNAL ERROR: HierMesh: Can't find chunk 'SSC1'

at com.maddox.il2.engine.HierMesh.ChunkFind(Native Method)
at com.maddox.il2.engine.HierMesh.chunkFind(HierMesh.java:285)
at com.maddox.il2.objects.ships.BigshipGeneric.initMeshBasedProperties(BigshipGeneric.java:1662)
at com.maddox.il2.objects.ships.BigshipGeneric.<init>(BigshipGeneric.java:1988)
at com.maddox.il2.objects.ships.ShipEssexs$USSEssexCV9_1960.<init>(ShipEssexs.java:58)
at com.maddox.il2.objects.ships.ShipEssexs$USSHancockCV19_1968.<init>(ShipEssexs.java:201)
at java.lang.reflect.Constructor.newInstance(Native Method)
at com.maddox.il2.game.Mission.loadChiefs(Mission.java:1525)
at com.maddox.il2.game.Mission._load(Mission.java:464)
at com.maddox.il2.game.Mission.access$000(Mission.java:129)
at com.maddox.il2.game.Mission$BackgroundLoader.run(Mission.java:405)
at com.maddox.rts.BackgroundTask.doRun(BackgroundTask.java:155)
at com.maddox.il2.game.MainWin3D.loopApp(MainWin3D.java:108)
at com.maddox.il2.game.Main.exec(Main.java:437)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Mission: Can't create chief '3_Chief' [class:ships.ShipEssexs$USSHancockCV19_1968]
Mission: South Vietnam.mis is Playing
warning: no files : music/takeoff
warning: no files : music/inflight
WARNING: Clear VBuf 92233
WARNING: Clear IBuf 327456
WARNING: Clear VBuf 87412
WARNING: Clear IBuf 327405
-------------------------------- MISSION FAILED ---------------------
warning: no files : music/crash
Time overflow (20001): speed 0.6465517
WARNING: Clear VBuf 98713
WARNING: Clear IBuf 327174
Time overflow (30003): speed 0.6944444
WARNING: Clear VBuf 81237
WARNING: Clear IBuf 327489
ObjState.finalize: Object of com.maddox.il2.objects.ships.ShipEssexs$USSHancockCV19_1968 NOT destroyed
Loaded camouflage: CBI
Loading map.ini defined airfields:
WARNING: ObjectVACache_Clear()
WARNING: * Buf0 : Obj: 405,  Vert 29193,  Ind 121347
WARNING: * Buf1 : Obj: 957,  Vert 121672,  Ind 255660
WARNING: * Buf2 : Obj: 10,  Vert 19031,  Ind 45264
Load bridges
Load static objects
[21.04.2012 16:30:53] -------------- END log session -------------
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: western0221 on April 21, 2012, 11:03:16 AM
So I have installed the version 2.01 and it's the same. The ships appears on the FMB but when I launch the mission, the aircraft carrier does not appear.
This is my log file maybe you can help me with is.

Code: [Select]
INTERNAL ERROR: HierMesh: Can't find chunk 'SSC1'
Ship creation failure:
INTERNAL ERROR: HierMesh: Can't find chunk 'SSC1'

java.lang.RuntimeException: INTERNAL ERROR: HierMesh: Can't find chunk 'SSC1'

at com.maddox.il2.engine.HierMesh.ChunkFind(Native Method)
:
Mission: Can't create chief '3_Chief' [class:ships.ShipEssexs$USSHancockCV19_1968]

This log shows that Hier.him reffers "SSC1.msh" and cannot find it, but my version2.01's Hier.him doesn't reffer "SSC1.msh".

Once erase "USSEssexCVs_SCB125" folder and clean-up, and after it, install version2.01.
Don't overwrite the new version onto the old version.
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Telmo on April 21, 2012, 12:02:54 PM
Since the beta 12, the lines in the .ini files are the same no ? Or I have to change it also ?
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: western0221 on April 21, 2012, 12:14:47 PM
Since the beta 12, the lines in the .ini files are the same no ? Or I have to change it also ?
Not same.
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Telmo on April 21, 2012, 02:02:23 PM
Hmmmmm maybe it's for that the Carrier don't appear when I launch the mission. I will try Tomorrow.
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Telmo on April 22, 2012, 02:57:11 AM
So I changed the lines of the .ini files. And ... my game crash at 70%.
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: BT~Tarik on May 15, 2012, 01:38:02 PM
Same problem here...they can be placed in FMB but they are invisible in game...
DBW 1.71
Ships extension 2.11 there
SAS AI engines mod
Clemenceau class ----> they work fine

logfile :

Code: [Select]
Ship: Value of [USSEssexCV9_1957]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:771)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:11)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:192)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1603)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1548)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:211)
at com.maddox.il2.game.Main.exec(Main.java:420)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSEssexCV9_1957
Ship: Value of [USSEssexCV9_1960]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:771)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:12)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:192)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1603)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1548)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:211)
at com.maddox.il2.game.Main.exec(Main.java:420)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSEssexCV9_1960
Ship: Value of [USSYorktownCV10_1956]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:771)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:13)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:192)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1603)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1548)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:211)
at com.maddox.il2.game.Main.exec(Main.java:420)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSYorktownCV10_1956
Ship: Value of [USSIntrepidCV11_1957]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:771)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:14)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:192)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1603)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1548)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:211)
at com.maddox.il2.game.Main.exec(Main.java:420)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSIntrepidCV11_1957
Ship: Value of [USSIntrepidCV11_1970]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:771)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:15)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:192)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1603)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1548)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:211)
at com.maddox.il2.game.Main.exec(Main.java:420)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSIntrepidCV11_1970
Ship: Value of [USSHornetCV12_1957]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:771)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:16)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:192)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1603)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1548)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:211)
at com.maddox.il2.game.Main.exec(Main.java:420)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSHornetCV12_1957
Ship: Value of [USSHornetCV12_1970]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:771)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:17)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:192)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1603)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1548)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:211)
at com.maddox.il2.game.Main.exec(Main.java:420)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSHornetCV12_1970
Ship: Value of [USSTiconderogaCV14_1962]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:771)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:18)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:192)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1603)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1548)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:211)
at com.maddox.il2.game.Main.exec(Main.java:420)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSTiconderogaCV14_1962
Ship: Value of [USSLexingtonCV16_1958]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:771)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:19)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:192)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1603)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1548)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:211)
at com.maddox.il2.game.Main.exec(Main.java:420)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSLexingtonCV16_1958
Ship: Value of [USSHancockCV19_1957]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:771)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:20)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:192)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1603)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1548)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:211)
at com.maddox.il2.game.Main.exec(Main.java:420)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSHancockCV19_1957
Ship: Value of [USSHancockCV19_1968]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:771)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:21)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:192)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1603)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1548)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:211)
at com.maddox.il2.game.Main.exec(Main.java:420)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSHancockCV19_1968
Ship: Value of [USSRandolphCV15_1957]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:771)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:22)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:192)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1603)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1548)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:211)
at com.maddox.il2.game.Main.exec(Main.java:420)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSRandolphCV15_1957
Ship: Value of [USSRandolphCV15_1962]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:771)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:23)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:192)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1603)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1548)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:211)
at com.maddox.il2.game.Main.exec(Main.java:420)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSRandolphCV15_1962
Ship: Value of [USSKearsargeCV33_1965]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:771)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:24)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:192)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1603)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1548)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:211)
at com.maddox.il2.game.Main.exec(Main.java:420)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSKearsargeCV33_1965
Ship: Value of [USSOriskanyCV34_1965]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:771)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:25)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:192)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1603)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1548)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:211)
at com.maddox.il2.game.Main.exec(Main.java:420)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSOriskanyCV34_1965
Ship: Value of [USSShangriLaCV38_1955]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:771)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:27)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:192)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1603)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1548)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:211)
at com.maddox.il2.game.Main.exec(Main.java:420)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSShangriLaCV38_1955
Ship: Value of [USSShangriLaCV38_1970]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:771)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:28)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:192)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1603)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1548)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:211)
at com.maddox.il2.game.Main.exec(Main.java:420)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSShangriLaCV38_1970

and bottom part :

Code: [Select]
INTERNAL ERROR: HierMesh: Can't find chunk 'Head220_1'
Ship creation failure:
INTERNAL ERROR: HierMesh: Can't find chunk 'Head220_1'

java.lang.RuntimeException: INTERNAL ERROR: HierMesh: Can't find chunk 'Head220_1'

at com.maddox.il2.engine.HierMesh.ChunkFind(Native Method)
at com.maddox.il2.engine.HierMesh.chunkFind(HierMesh.java:285)
at com.maddox.il2.objects.ships.BigshipGeneric.initMeshBasedProperties(BigshipGeneric.java:2534)
at com.maddox.il2.objects.ships.BigshipGeneric.<init>(BigshipGeneric.java:2895)
at com.maddox.il2.objects.ships.ShipEssexs$USSEssexCV9_1960.<init>(ShipEssexs.java:58)
at com.maddox.il2.objects.ships.ShipEssexs$USSOriskanyCV34_1970.<init>(ShipEssexs.java:240)
at java.lang.reflect.Constructor.newInstance(Native Method)
at com.maddox.il2.game.Mission.loadChiefs(Mission.java:1525)
at com.maddox.il2.game.Mission._load(Mission.java:464)
at com.maddox.il2.game.Mission.access$000(Mission.java:129)
at com.maddox.il2.game.Mission$BackgroundLoader.run(Mission.java:405)
at com.maddox.rts.BackgroundTask.doRun(BackgroundTask.java:155)
at com.maddox.il2.game.MainWin3D.loopApp(MainWin3D.java:108)
at com.maddox.il2.game.Main.exec(Main.java:437)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Mission: Can't create chief '0_Chief' [class:ships.ShipEssexs$USSOriskanyCV34_1970]
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: western0221 on May 15, 2012, 11:41:00 PM
Same problem here...they can be placed in FMB but they are invisible in game...
DBW 1.71
Ships extension 2.11 there
SAS AI engines mod
Clemenceau class ----> they work fine

logfile :

I changed many msh names at version2.00 .
Then, ships.ini is re-writed.
Erase old "USSEssexCVs_SCB125" folder completely and old ships.ini entries completely.
After it, copy versioni2.01 "USSEssexCVs_SCB125" folder to your #DBW folder and add ships.ini entries.
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: =AVG=WolfPack_66 on May 17, 2012, 02:28:42 AM
idk if anyone is haveing this problem but when i try to spawn on the ship i start in the air thats only on the movein ships
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: SAS~Bombsaway on May 30, 2012, 11:16:33 AM
Sorry for the late reply but I just installed these ships in my DBW. You do mean in FMB and not a quick mission. I dont beleive you can take off from a carrier in QMB. Also, if you have too many planes on deck it will "bump" planes off to an air start.
When you place the waypoint "take off" look at the bottom left and you will see "set" Click that and drag your mouse over the carrier and you will see a green line following your mouse. Wait until it highlights the carrier and left click the mouse. You should then see that the line remains. Try that and see if it works.

Just a note on installing these ship.. this has to be the most extensive edditing of the ini's I ever had to do  ??? but it is well worth it when your done.  8)
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: J.j. on June 11, 2012, 01:49:15 PM
Are there any ways to make the catapults of the carriers from this mod working? I've tried with the CARRIER MOD UP3 RC4 (link on the first page, answer 78, mod from sanka) but it doesn't work. Yet, the catapults of all the non-angled deck carriers are working?
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Kazegami on June 11, 2012, 04:22:54 PM
Are there any ways to make the catapults of the carriers from this mod working? I've tried with the CARRIER MOD UP3 RC4 (link on the first page, answer 78, mod from sanka) but it doesn't work. Yet, the catapults of all the non-angled deck carriers are working?

They work for me. You just need to install all the mods listed on the first page... ;)
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Diving_Hawk on June 12, 2012, 03:02:06 AM
Quote
Are there any ways to make the catapults of the carriers from this mod working? I've tried with the CARRIER MOD UP3 RC4 (link on the first page, answer 78, mod from sanka) but it doesn't work. Yet, the catapults of all the non-angled deck carriers are working?

You mean they don't work at all or they do not have the necessary power.
If they do not work at all then the for some reason your carrier mod is not working properly ( I use UP3RC4 and they work with carrier mod)

If on the other hand they are not powerfull enough you need to set the mission past 1950s.
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: J.j. on June 12, 2012, 02:16:09 PM
They don't work at all (but they are working with non angled deck carriers). I must have done something wrong with the installation, but I don't know what. I 've used the mod on the first post (USSEssexCVs_SCB125) and the mod 00_CarrierMod, with UP3RC4 and adding the correct line in the addup3rc4 text file to the ships.ini.
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Riptide_One on July 07, 2012, 06:59:47 PM
Is there any news for those of us who can't get the catapults on the angle deck carriers to work at all?

Cheers,

Riptide
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: sphantom on July 09, 2012, 08:15:31 AM
I followed the install to the letter then checked they show up in the objects viewer but in the campaign Korea the plane is in the water no carrier. the catapult mod is working on the old carriers but no angle decks show up in the campaign or when I make one in the fmb.
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: duckie on July 20, 2012, 12:08:10 PM
still dont understand how to get cat to work on angle deck,,, does this work on HFSX6.0.1 ?
USS Essex SCB-125 ver 2.01 works fine, i just dont get how to install cat mod tried following readme but no luck   
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Hubberranz on July 28, 2012, 05:40:18 PM
OMG ! Got it to work at last, just now, the catapult are working for ESSEX1960's in DBW !
( previously the CTO included DBW7,1 worked with every carrier, including new Colossus class, but
I could not make it work with the Essex1960  class, everything tried... including the patch... )
So, I use DBW7,1, NO Ship Extention 2,11, added CTO v2,5 as a MOD , + the patch, and now CATAPULTS work fine...
( entered the install option 5b, the lines for UP3_RC4, and select a year for the mission above 1950's ).
I'm so happy ! ...a  new era for Vietnam war oppenning up ! Hope this will help people with catapults issues in DBW !

Is there any news for those of us who can't get the catapults on the angle deck carriers to work at all?
Thanks Diving_Hawk and western0221 for great mods !

 ;D ;D
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Riptide_One on July 28, 2012, 10:40:14 PM
Robhans,

First of all, congratulations on getting the catapults to work on the angle deck carriers!

Like you, I am using a DBW 1.7.1 install of IL-2. I set up a JSGME install of the angle deck carriers mod without the ship extension mod. I copied the files from the Carrier Take Off 5.2 patch into the SAS_AI_Engines_Hotkeys_Carriers mod directory and place it in my #DBW directory. I did this because I am under the impression that this mod is needed even for the catapults on the WWII carriers. When I tried to take off from an angle deck carrier in the game, the catapult still did not work.

So, it seems that I have missed some details about what you did to get the catapults to work. I do have the following questions:

1) Where can I find the "install option 5b" to which you referred?
2) Where can I find the "lines for UP3_RC4"?

Cheers,

Riptide
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Riptide_One on July 29, 2012, 03:18:53 AM
Robhans,

So, installing the angle deck carriers using JSGME could be the source of my problems with the catapult. Thank you very much for your comments :). I'll re-configure my install accordingly and let you know what happens.

Cheers,

Riptide
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: western0221 on July 29, 2012, 03:27:09 AM
Robhans,

So, installing the angle deck carriers using JSGME could be the source of my problems with the catapult.

What?

I can't understand JSGME for this Essex pack.
Essex pack doesn't support JSGME.
(JSGME doesn't support any Ship MOD installing, too!)

You have to install as written in "Readme_en.txt".
Anyone can support the ways outside "Readme_en.txt".
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Riptide_One on July 29, 2012, 10:03:35 AM
Robhans,

I've re-configured my angle deck carrier install, but it seems that I am still doing something wrong as the catapult still does not work. Here's what I did:

1) Installed '____00000_000_CarrierTakeOff5.7.2' in the #DBW directory so that it is at the top of that directory. Also, I confirmed that the '66731988E795FA7A' is the only file in that directory.

2) Installed '___00000_SAS_AI_Engine_HotKeys_Carriers in the #DBW directory so that it is second from the top of that directory. However, I found that my game crashes immediately. I removed '96F4C2FA0F2B0FD0' from the directory and as a result, the game now loads.

3) Installed USSEssexCVs_SCB125 in the #DBW directory.

4) Revised chief.ini per add1.chief.ini and add2.chief.ini.

5) Revised ships.ini per add.UP3RC4.ships.ini.

6) Revised stationary.ini per add.stationary.ini.

7) Revised techics_ru.properties per add.techics_ru.properties

Question: You gave a '[MODS]' section listing catapult settings and stated that "...my air.ini does have these lines, but they are mostly default settings anyway". I think you meant to say that these lines were in your conf.ini. Please confirm whether or not that is so.

If you have some other suggestions, please let me know and I'll give them a try. I would very much like to get this this mod to work. For now, my angle deck carriers are dead in the water :(.

Cheers,

Riptide
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Riptide_One on July 29, 2012, 10:09:50 AM
Robhans,

One more question. In the '_____00000_000_CarrierTakeOff5.7.2' directory, file '66731988E795FA7A' is dated 2/26/2012, 10:18 A.M. Are you using the same version of this file?

Cheers,

Riptide
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Riptide_One on July 29, 2012, 10:17:54 PM
Robhans,

Regarding my status, the angle deck carriers do show up in the game. Note that when using the angle deck carriers, I always set the year between 1955 and 1960. However, when I taxi up to the catapult, my plane does not 'connect'. So, there is no catapult available for the player's plane. When AI aircraft launch, they do so without the catapult. If the aircraft is a jet, it promptly becomes a submarine.

Thanks for the updated CTO 5.7.2.1 link. I plan to change the names of the mod directories back to what they were originally to match your configuration. Also, I will re-download 00000_SAS_AI_Engine_HotKeys_Carriers and replace the version I have. I'll let you know what happens.

Cheers,

Riptide
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Riptide_One on July 29, 2012, 10:46:17 PM
Robhans,

You are the man of the hour! The angle deck carrier catapults work ;D! Thank you very much for your helpful advice.

Also, thank you western0221 and Diving_Hawk for a really great mod for IL-2 ;D!

Cheers,

Riptide
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Diving_Hawk on August 01, 2012, 01:09:02 PM
Whoa

Riptide I remember you were trying to fix this for quite some time.
Great news ;)

and congrats to Robhans for his walkthrough.

Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: 4S_Vega on October 05, 2012, 09:42:32 AM
maybe issue with F-4 Phantoms at takeoff

seem that spawnpoints are too near for F4s

when mission start wings of near planes are one into other...... no problem for AI because they go directly on catapult

but human can't taxi to catapult because after released chocs the player's plane crash into the nearest aircraft

offline you can go over catapult with autopilot but is almost impossbile takeoff online with f4
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Sleepingdragon on October 12, 2012, 07:09:10 PM
That's actually pretty realistic; the F-4 never operated off the Essex class, too heavy. They were equipped with F-8s, A-4s almost exclusively as attack carriers. They could carry S-2 ASW planes and E-1 AEW planes as well, but not the F-4.......normally. The A-7 could have, but I don't know if it ever did. In 73, Hancock and Oriskany still had F-8Es and A-4Fs, at least Hancock did for sure.  :-X
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: zdragon on October 13, 2012, 08:58:16 PM
Way back when my dad got his wings after completing his CQ on the Lexington (Jan of 85), so im a little partial to using the lexington for everything  :-[  but I love all carriers equally and will fly anything with a tailhook.  Thank you for the great ships.  I got panthers, cougars, and furys flying off and on the ships almost daily.  Its always a nice challenge to run a lap around the ship and catch a 3 wire.  I have noticed that when i catch a 4 wire, i end up in the drink, but it could be something with how i fly.
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: BravoFxTrt on October 16, 2012, 06:11:11 AM
Thank you Western, these are Great
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: duffys tavern on October 16, 2012, 05:50:20 PM
A-7s on USS Oriskany 1970
http://www.youtube.com/watch?v=mXaKTJIVxHM
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Telmo on October 17, 2012, 06:41:36 AM
Very nice video duffys :)
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: BravoFxTrt on October 18, 2012, 12:46:57 AM
Congrats Western and Ranwers, your mods work in 4.11.1! ;)

(http://i163.photobucket.com/albums/t283/BravoFxTrt/grab0026_zps69177d30.jpg)
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: SAS~Tom2 on October 19, 2012, 08:59:01 AM
Readme got a little typo:

..."
3. Edit your "chief.ini" and paste the text in "add1.chief.ini".
   Where to insert is after USSIntrepidCV11.
   You can arrenge insert point like "USSEssexCV9_1957 is after Daidalos Essex"
  and "USSIntrepidCV11_1956 is after Daidalos Intrepid".

4. Edit your "chief.ini" and paste the text in "add2.chief.ini".
   Where to insert is after USSInterpidCV11.
   You can arrenge insert point, but nothing effentive this arrengement.
"

Lol nitpicking, but since I arrange edits by searching for entry line and the result was "couldn't find" I thought I post it, almost quit install..until I figured it's a typo and I'm a dumby as well since it's the same line as in 3.
Chrs
 :)
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: BT~wasted on October 20, 2012, 09:14:15 AM
yep :)

you need to D/L latest AI engines mod and catapult mod and then add  special lines into your conf.ini for catapult power.

I am using 70.0 and it is more then enough to get the fully loaded F-4 off the deck  ;)
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: NS~mati140 on October 20, 2012, 11:04:33 AM
yep :)

you need to D/L latest AI engines mod and catapult mod and then add  special lines into your conf.ini for catapult power.

I am using 70.0 and it is more then enough to get the fully loaded F-4 off the deck  ;)

Special lines? Just set mission date to 1960 and you're good to go, no need for any conf.ini lines.
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Kilo on October 22, 2012, 01:45:12 AM
you need to D/L latest AI engines mod and catapult mod
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Kilo on October 22, 2012, 02:05:44 AM
Ok, the SAS AI Carrier Hotkeys is not compatible with UP3. You might need another install with this:

http://www.sas1946.com/main/index.php/topic,15649.0.html (http://www.sas1946.com/main/index.php/topic,15649.0.html)
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: NS~mati140 on October 22, 2012, 07:33:12 AM
you need to D/L latest AI engines mod and catapult mod

Sorry, but I'm new to the il2 community...... What's AI engines again? I'm running UP3RC4 alone.... I've already downloaded the catapult mod and I can takeoof on a regular carrier, but not this mod's ones

Don't install any external mods on UP3! UP 3 is a closed pack for multiplayer, with single standard and all games compatible with each other. Install DBW 1.71, you can use them both in pararell (Though DBW REQUIRES UP3 to be installed) and they won't interfere with each other as you can select your game version at startup thanks to IL-2 selector. Than install what's mentioned few posts above, on DBW: AI, Engines, Hotkeys and Carriers v 2.5 + newest Carrier Take Off mod - they are all mentioned in first post.
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Sir_Pungskugga on December 11, 2012, 11:34:02 AM
Um.... am i the only one not getting the download link to work? I'd love to have this carrier now that i have the F-4's, A-7's and F-8's :-)
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Dixiecapt on December 13, 2012, 11:44:37 PM
yeah the link is down. I'm in the same boat as sir pung. Could anyone toss one back up?
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Kilo on December 14, 2012, 12:08:47 PM
If Western allows me, i'll upload the pack as an attachment to my post
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: western0221 on December 16, 2012, 12:56:29 PM
It seems something error inside of mediafire server .

Now that error is recovered, mediafire DL link in my 1st post may work well.
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: GAE_Chape on December 16, 2012, 08:00:37 PM
http://www.mediafire.com/?u6n7oe1d7j7a5d7

Link Down  :'( :'( :'( :'( :'(
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: western0221 on December 17, 2012, 06:12:53 AM
http://www.mediafire.com/?u6n7oe1d7j7a5d7

Link Down  :'( :'( :'( :'( :'(

Now I test this DL link and it works well.

Maybe mediafire prohibits to download from some countries or some areas...

Anyone can re-upload to another space?
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: NS~mati140 on December 17, 2012, 06:22:52 AM
Quote
The file you requested has been blocked for a violation of our Terms of Service.

Still have questions or do you think we've made an mistake? Check our knowledge base for more information or contact us about it.

Check if you can download it when logged out of mediafire - it seems only you can download this file.
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: western0221 on December 17, 2012, 09:40:13 AM
Quote
The file you requested has been blocked for a violation of our Terms of Service.

Still have questions or do you think we've made an mistake? Check our knowledge base for more information or contact us about it.

Check if you can download it when logged out of mediafire - it seems only you can download this file.

Ahhh....
You are right.  :(

When I re-upload Essex pack archive to mediafire, but mediafire continues denying it.

I'm testing to use ADrive!
New DL link by ADrive is written in 1st post.
Please test it.
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Kilo on December 17, 2012, 10:12:21 AM
It works.
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Torenico on December 17, 2012, 01:37:31 PM
Yes! Thanks for reuploading   ;D

Now that i learned how to install ships..!
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Baco on December 21, 2012, 07:03:00 AM
you need to D/L latest AI engines mod and catapult mod

Sorry, but I'm new to the il2 community...... What's AI engines again? I'm running UP3RC4 alone.... I've already downloaded the catapult mod and I can takeoof on a regular carrier, but not this mod's ones

Don't install any external mods on UP3! UP 3 is a closed pack for multiplayer, with single standard and all games compatible with each other.

Not true, I use UP3 very modified. the problem is that it doesn't have any more updates so for now its basiclly dead. DBW does Not work on MP mode making it useless for on line squads that got use to using the moving dogfight.. Fog of war does not seem to work properlly in 4.10, and DBW...

the garte news is that HSFX and 4.11 works like  a charm...
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: Baco on December 21, 2012, 07:15:40 AM
Congrats Western and Ranwers, your mods work in 4.11.1! ;)


Bravo, whitch Catapult mod did you used? the HSFx 5.1 one?
Title: Re: USS Essex SCB-125 angled deck pack ver2.01 (both 4.11 / 4.10)
Post by: western0221 on December 26, 2012, 09:01:58 AM
I test this Essex1960 pack in SASModAct4 on 4.11.1m  - OK with ShipExtentions2.13 .  :D
Title: Re: USS Essex SCB-125 angled deck pack ver2.01 (both 4.11 / 4.10)
Post by: Maico on January 01, 2013, 01:02:07 PM
  I have tried to work on this mod for a few days now.  I finally gave up but now my US carriers are kaput.  When the mission starts I just explode.  My plane falls inside the carrier and kaboom!

Help...

Title: Re: USS Essex SCB-125 angled deck pack ver2.01 (both 4.11 / 4.10)
Post by: Maico on January 01, 2013, 01:56:05 PM
 OMG!!  After all this time.  I cant beleive this.  The reason I thought this was not working was because the Wildcat training missions that come with the game are corrupted.  The F4F missions keep starting with the plane in the water.  ALL others work fine.  I also got the Essex.  Its a sexy mothur fooker tooo.  Damn!  test this good fellas. 
  Thanks so much for this wonderfull ship addition.  Vietnam is really finnally here.

Hip hip horray!!!

Maico
Title: Re: USS Essex SCB-125 angled deck pack ver2.01 (both 4.11 / 4.10)
Post by: SAS~Gerax on January 01, 2013, 02:40:04 PM
Tested the  Aircraft-Carrier Clemenceau R98 in 4.11 Modact 4.0 #SAS folder,
all features (CTO, spinning Radoms, Missiles etc.) works OK.  ;)
Title: Re: USS Essex SCB-125 angled deck pack ver2.01 (both 4.11 / 4.10)
Post by: Maico on January 04, 2013, 03:29:00 PM
  And I lost half my jets now.  Half the F-86s and the F-84 was gone.  Due to this mod or the Ship 211 mod? Hummmm..  Made a new install.  What gives?
  Has anyone else experienced this?
Title: Re: USS Essex SCB-125 angled deck pack ver2.01 (both 4.11 / 4.10)
Post by: BravoFxTrt on January 04, 2013, 04:19:26 PM
Not here, at all No problems with this Mod in 4.10.1m or 4.11.1m...
Title: Re: USS Essex SCB-125 angled deck pack ver2.01 (both 4.11 / 4.10)
Post by: Maico on January 04, 2013, 05:42:49 PM
Lost the same jets in my new install.  My mistake.  Its not the ships.  It is something else.  Now I got some detective work to do. 

Found it!  Revisited Pilots Pack.  I removed it and now I am a happy camper. 
Title: Re: USS Essex SCB-125 angled deck pack ver2.01 (both 4.11 / 4.10)
Post by: BravoFxTrt on January 06, 2013, 11:28:13 AM
Cool.
Title: Re: USS Essex SCB-125 angled deck pack ver2.01 (both 4.11 / 4.10)
Post by: Baco on January 09, 2013, 03:10:22 PM
I test this Essex1960 pack in SASModAct4 on 4.11.1m  - OK with ShipExtentions2.13 .  :D

Thnaks Western!
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: western0221 on January 11, 2013, 01:03:53 AM
version2.02 is released.
DL link is 1st post.

From 2.01 to 2.02 , I cleaned-up duplicated files.
It saves folder space from 678MB to 440MB.

You have to erase old "USSEssexCVs_SCB125" folder before installing 2.02 .
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: SAS~Gerax on January 11, 2013, 04:59:56 AM
Many thanks mate!  :)
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: BravoFxTrt on January 11, 2013, 07:17:15 AM
Western that link dont work for me.

Cool, got the link to work, Thanks! :D
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: zsoltfireman on January 16, 2013, 12:12:38 AM
I tried the USS Essex CV9 Day / 1965
One F9F8T Cougar model, but the catapult very slowly!
There was not enough energy!
What could be the problem?
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: SAS~Gerax on January 16, 2013, 12:17:34 AM
I tried the USS Essex CV9 Day / 1965
One F9F8T Cougar model, but the catapult very slowly!
There was not enough energy!
What could be the problem?

I solved it with editing the relevant mission file:

find this line in the *.mis file:
[SEASON]
  Year xxxx
and change to
  Year 1965

But also please go through all relevant in 1st post linked topics
and read carefully what western suggests.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: zsoltfireman on January 16, 2013, 12:41:36 AM
I tried the USS Essex CV9 Day / 1965
One F9F8T Cougar model, but the catapult very slowly!
There was not enough energy!
What could be the problem?

I solved it with editing the relevant mission file:

find this line in the *.mis file:
[SEASON]
  Year xxxx
and change to
  Year 1965

But also please go through all relevant in 1st post linked topics
and read carefully what western suggests.

Hello,

Yes!
That was the problem!

Thank you so much!

Zsolt
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: BravoFxTrt on January 16, 2013, 01:31:41 AM
Also found that Fuel quantity should be reduced as well, for better take off performance, If loaded with much armaments.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: zsoltfireman on January 16, 2013, 02:15:45 AM
Also found that Fuel quantity should be reduced as well, for better take off performance, If loaded with much armaments.

Yes,yes,but I noticed a problem
If  I use the F9-8T model plus observer pod
Crashes of the picture
What is this anomaly?
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: BravoFxTrt on January 16, 2013, 02:44:58 AM
zsoltfireman    The 8T plus Pods Fuel at 50%  take with no problem
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: zsoltfireman on January 16, 2013, 03:12:12 AM
Yes, sometime it works perfectly for me
Great pics!  ;)
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: BravoFxTrt on January 16, 2013, 03:19:23 AM
Oh cool, thanks.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: Whiskey_Sierra_972 on January 16, 2013, 06:45:22 AM
Anyone tested the new version with Ranwers carrier crew?
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: BravoFxTrt on January 16, 2013, 07:06:43 AM
I have it working in my SAS 4.0

(http://www.sas1946.com/images/imageshit/img72/7857/16012013160232.jpg)
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: Sleepingdragon on January 16, 2013, 03:20:53 PM
 8) That is just cool. Even if the Navy didn't operate F-4s off Essex class carriers, but used F-8s. I guess they could have though. They could operate A-3 skywarriors and E-1s, so it's feasable. I subscribed to "Proceedings" for many yrs, the US Naval institute's magazine, and there were lots of articles on what type of planes operated best off which carriers.

The F-4s flew off the Midway class, and I think one of those is on the way.....in the expanded deck version she last served in.

I bet you have to have her going max speed into a bit of wind to get off the deck reliably. Some nice work.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: BravoFxTrt on January 16, 2013, 06:03:26 PM
Yes thats what were missing is a Carrier for our Phantoms, is going to be nice when we do. :)
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: BOYAN on January 16, 2013, 07:40:51 PM
Hi guys. Just wanted to say great work, modern Essexes are really getting along... One question if I may... Is the island model final or is there more detailed version planned for the future?
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: western0221 on January 16, 2013, 11:23:31 PM
Western that link dont work for me.

Cool, got the link to work, Thanks! :D
All right. ;D


Hi guys. Just wanted to say great work, modern Essexes are really getting along... One question if I may... Is the island model final or is there more detailed version planned for the future?

Do you say about version 2.00 or later ?
At version 2.02 , I think it is finished about 3D modeling.
When you feel something "less detailed" at version 2.02 , that's only a skin texture problem.
If someone can re-draw skin textures more realistinc... I can include them in my pack.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: Whiskey_Sierra_972 on January 16, 2013, 11:42:15 PM
I have it working in my SAS 4.0
....

Thanks for the reply!

I'll install the new version asap....
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: BOYAN on January 17, 2013, 11:46:23 AM
Quote
Do you say about version 2.00 or later ?

Im still on 4.09, so i cant install SCB-125. Is version 2.02  shown in the picture few posts above?
By less detailed I mean the all round look of the island, its very basic, original island is much more detailed,
as are the islands or other carriers in the sim... in my opinion.

Here are some pisc of CV-10 island and general:
(http://i1296.photobucket.com/albums/ag19/milemiletich/6848031074_6a887119d9_c_zpse9faebdc.jpg)
(http://i1296.photobucket.com/albums/ag19/milemiletich/uss_yorktown_bridge_zpsc6471855.jpg)
(http://i1296.photobucket.com/albums/ag19/milemiletich/6994158571_e1b887919b_c_zps14166d11.jpg)
(http://i1296.photobucket.com/albums/ag19/milemiletich/6994155647_eb5c3cf479_c_zps12935ee6.jpg)
(http://i1296.photobucket.com/albums/ag19/milemiletich/6848069758_9f97676661_k_zpsb1dc8892.jpg)
(http://i1296.photobucket.com/albums/ag19/milemiletich/USS_Yorktown_CVS-10_underway_June_1962_zpsfcbcb42b.jpeg)

A couple of beauty shots:
(http://i1296.photobucket.com/albums/ag19/milemiletich/Charleston-SC-USS-York-Town-December-27-2011_zpse394aa4a.jpg)
(http://i1296.photobucket.com/albums/ag19/milemiletich/Charleston-SC-USS-York-Town-December-27-2011-2_zps484a8b06.jpg)

Thanks for replying.


Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: western0221 on January 17, 2013, 03:35:41 PM
To BOYAN.
Now I'm not interest in it.
I'm saticefied in almost my model.
Only 1 point I want to add , deck textures resolution make twice hight.

When some one want to add more details on its island or hull 3D/2D by himself , I'm glad.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: BOYAN on January 17, 2013, 04:26:33 PM
Ok, just wanted to put my thoughts out there...
Here are some pisc from Strike Fighters 2... Essex class doubling for Australian carrier.

(http://i1296.photobucket.com/albums/ag19/milemiletich/img01792-1366x768_zps2d137900.jpg)
(http://i1296.photobucket.com/albums/ag19/milemiletich/img01794-1366x768_zps78d443c6.jpg)


Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: western0221 on January 17, 2013, 06:41:16 PM
In the future , when I have spare time , I will be able to remake island 3D.

I have some plans to increase texture resolution , etc.
At the same time , 3D remaking will be able.

Its priority is not high.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: BOYAN on January 17, 2013, 07:11:17 PM
Cool mate, there is no rush. Essexes made history, from ww2, Korea, to Vietnam, its only fair to have them in the the best simulator out there in their best condition and detail... I doubt that there will be any Essex class ships officially made for any simulator more advanced than 1946 in the future, so its all in modders hands... Thanks!
Title: Angled deck carriers not showing in FMB ......
Post by: DGB on February 26, 2013, 05:07:21 AM
Hi,
 I have installed USS Essex CV SCB-125 with angled deck pack (version2.02)
In my DBW 1.7 set up.
It all works well but only from Static Ships menu in FMB.
I can place a static carrier from the list and use the catapult launch so I assume all the elements are in there somewhere.
I have edited the ships .ini file as detailed in the install instructions witch I thought would add the carriers to the Ships menu in FMB but they do not appear.
Any help appreciated.
Regards
DGB
Title: Re: Angled deck carriers not showing in FMB ......
Post by: sphantom on February 26, 2013, 06:47:46 AM
did you also install the ship ext. mod too
Title: Re: Angled deck carriers not showing in FMB ......
Post by: DGB on February 26, 2013, 08:48:01 AM
Many thanks for your reply.
Please advise on the correct ships extension pack to install as I read not all are compatible with DBW1.71.
Also any tips on installing it would be helpful.

Regards
DGB.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: karla on March 04, 2013, 02:52:06 PM
@western0221 references #126, #129

I have started new textures for CVA 34 Oriskany 1970 - if you don't mind. It's an arbitary choice, but I thought it best to publicize it so we don't end up duplicating work.

I began with 4x increase in texture dimensions but it didn't seem to work with the HiRes MOD in DBW 1.7 (http://www.sas1946.com/main/index.php/topic,28127.0.html) so I have merely doubled the texture maps dimensions - giving 4x memory useage but enough resolution to show quite small details. I haven't checked the change in framerate yet.

The flight deck is well underway using Gimp with layers for: hues, linings, markings, tie downs, oil stains, tyre marks, weathering, hazard markings, miscellaneous markings and so on. I'll post a WIP image soon.

Oh, and thanks for the models.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: karla on March 06, 2013, 03:24:48 PM
CV-34 flightdeck is almost complete and here is an image to show progress. The aim is to give the feeling of scale and atmosphere even though not all details are exact. The superstructure and hull will be started soon and further images will be posted.


(http://www.mediafire.com/conv/27c3d333603edbb56a9bc8c439ba72c21b6c64ea9a4fddc2e902d7dde8951a0d6g.jpg)
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: BOYAN on March 06, 2013, 04:56:55 PM
OMG, that looks awesome!!! Looking forward to your work on SCB-125!!
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: SAS~Gerax on March 06, 2013, 05:07:30 PM
Yes, that looks very promising!
Looking forward to it Karla!  :)
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: Triad773 on March 06, 2013, 08:51:34 PM
Wow. It looks like a different game (as in more advanced)  :o  8)

You guys rock  :)

Looking forward to what develops!

Cheers and thanks

Triad
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: western0221 on March 07, 2013, 08:01:04 AM
To karla...

I have a plan to remake SuperStructure 3D and UV mapping.
Today's SuperStructure skin texture will be changed in mapping.

It need about a half year to be done, I think.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: SAS~Gerax on March 07, 2013, 08:06:41 AM
It need about a half year to be done

take your time mate.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: karla on March 12, 2013, 03:07:59 PM
(http://www.mediafire.com/conv/614f7d01bbfbd7125c20dc241f55698c7df6c3b293915325448c021147b8284a6g.jpg)

CVA-34 interim high resolution texture mapping is continuing with western0221's blessing (thanks).

The flight deck has now been completed apart from a few cosmetic details that will be added later. The island superstructure is almost complete but there are some awkward UV configurations which may mean that some intended details may not be possible. Some details are difficult to find so read across from other ships and reasonable engineering assumptions have been made. No promises on completion but within six weeks seems doable.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: BravoFxTrt on March 12, 2013, 03:24:10 PM
Damn. Looking better all the time!.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: NS~mati140 on March 12, 2013, 03:51:17 PM
Jesus... Looks like DCS.   :o
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: BOYAN on March 12, 2013, 08:53:25 PM
No way, that cant be IL2... Look at that!! Holy smokes. she looks so sexy....
Title: Re: USS Essex SCB-125 angled deck pack ver2.01
Post by: wplusaf on March 15, 2013, 12:30:43 AM
http://www.mediafire.com/?u6n7oe1d7j7a5d7

Link Down  :'( :'( :'( :'( :'(

Now I test this DL link and it works well.

Maybe mediafire prohibits to download from some countries or some areas...

Anyone can re-upload to another space?
Wired, still invalid. Anyone could help? :( :( :( :(
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: SAS~Malone on March 15, 2013, 04:20:04 AM
slightly OT, but i feel necessary at this point -
wplusaf, this is a community where communication is key.
can i ask that you look at some of your earlier posts and threads, and at least have the decency to reply to people who have answered some of your questions, as nobody likes trying to help, and then just hearing silence.... at least reply , one way or another, and acknowledge that you have read the responses.
thanks in advance   ;)
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: wplusaf on March 16, 2013, 12:38:33 AM
Oh, sorry about that, you know, I don't have much time to check replies on this forum, so sorry about not replying and appreciating. Anyway, thanks for reminding me about that. Also, sorry about my poor English.  :-[
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: SAS~Malone on March 16, 2013, 02:50:34 AM
your English is fine, mate - no problem :D
we don't expect replies to every post, but in cases where you ask for assistance, and someone gives help, it is good to reply to that, and let us know if the advice worked or not.
this will also help others who might have a similar problem - if they can see what worked for you, then they don't have to make a new thread asking the same thing.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: wplusaf on March 16, 2013, 08:08:52 AM
Haha, thanks for that. I will pay attention to it. You know, I am from China, and in China, most people don't care much about such things. Maybe I should be careful about that. Thanks for reminding me about that.  :)
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: SAS~Malone on March 16, 2013, 11:57:48 AM
it's called forum etiquette.  :)
so you have learned something new, you can share with your fellow countrymen, another crazy western practise. lol   8)
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: karla on March 19, 2013, 03:38:22 AM
CVA-34 HD skin is progressing well - it should be finished much sooner than anticipated. Some of the details are best interpretations from many sources - chief among them is Intrepid - but one feature has me puzzled. What is the square outhouse and inclined length (1)? Is it supposed to be a crane or steps or what? Also, do the hanger hull doors (2) open horizontally or vertically? Thanks.

(http://www.mediafire.com/conv/bc4b73d892fbc9d990b2d0826e507523277186f8000527aaa8d6463c582570b96g.jpg)
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: BravoFxTrt on March 19, 2013, 02:49:45 PM
These are all working in HSFX
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: BOYAN on March 19, 2013, 04:21:30 PM
Hey karla, keeps getting better and better!! Men, those details are hard to find for sure... Those hanger doors open horizontally, looks like. Heres a HUGE panorama of the USS Yorktown today.... http://upload.wikimedia.org/wikipedia/en/b/bd/USS_Yorktown_%28CV-10%29_panorama.jpg

And looks like other hanger doors were kept in the original design, roll up doors split up into a couple of sections as shown here on the USS Hornet today... http://www.usshornet-cv12.com/Ship/Exterior/slides/Sponson%20Hanger.html

And heres a link with many Yorktown images covering a lot of details concerning your detail number 1... http://svsm.org/gallery/yorktown/IMG_4943

Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: karla on March 26, 2013, 04:14:16 PM
Oriskany HD is almost completed - so I'll start a new thread very soon. Thanks to all who have contributed.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: BravoFxTrt on March 26, 2013, 04:18:20 PM
Very Cool Karla.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: BOYAN on March 26, 2013, 06:40:05 PM
oh boy oh boy oh boy....and you are unbelievably fast in your work, it took me ages to do 1024x1024 Boxer, and its still WIP, I just dont have enough concentration, rather take small steps...

Just couldnt resist to put here that whats coming...

(http://i1296.photobucket.com/albums/ag19/milemiletich/023449_zps3b1e7859.jpg)
(http://i1296.photobucket.com/albums/ag19/milemiletich/OriskanyOverhead001_zps98874d85.jpg)
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: Boosh on March 26, 2013, 09:37:26 PM
If you guys want photos or details of an Essex, PM me. I work at the Intrepid in NYC.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: karla on March 27, 2013, 02:03:29 PM
Thanks Boyan & Boosh but I am too committed now to make any changes to the textures and have decided to go with what has been created to date. Let's accept what is on offer this time; the next generation of IL2 carriers (fourth?) really need additional modelling as well as even more detailed texture mapping.

Will it be acceptable for me to start a new thread with an HD skin of USS Oriskany or should it be posted on some other site? (I've just read the change in policy on skinning which was posted last year  http://www.sas1946.com/main/index.php/topic,23604.0.html).
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: BOYAN on March 27, 2013, 03:48:14 PM
Post it here! Lets see her! SCBs are here on SAS!

The crew is ready!!

(http://i1296.photobucket.com/albums/ag19/milemiletich/4e13621a93b4ff78_large_zps0cafb02f.jpg)
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: karla on March 28, 2013, 04:43:52 PM
CVA-34 Oriskany HD texture model is available in a new thread http://www.sas1946.com/main/index.php/topic,33626.0.html
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: Sleepingdragon on April 02, 2013, 09:59:36 PM
Very nice work. Looks like U got rid of the gaggle of 20mm that were still left on it. Those things were gone by the mid 50s, so this is much more realistic. Very well done. I hope you can get it added to the next version of DBW and hsfx at some point.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: BravoFxTrt on April 02, 2013, 11:51:14 PM
(http://www.sas1946.com/images/imageshit/a/img16/7123/20130403at074523.jpg)
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: karla on April 03, 2013, 02:11:34 AM
[SOLVED] see post #162

Bravo/anyone - how do you get F-4 to taxi on Essex class carriers? Mine slide around like they're on ice, especially in heavy seas. Most times they are uncontrollable. My best technique is to use throttle at ~25%, Z & X full rudder control and B brakes on most of the time and wait for a useful roll of the carrier.

@Sleepingdragon - I didn't touch the model at all and guess that western0221 made the changes you're talking about.
@Bravo - nice pic, but get ready for my Oriskany-owned F-4 in HD 2048.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: BravoFxTrt on April 03, 2013, 02:30:49 AM
Karla, do you have Engine mod 2.6, I think thats one of the Fixes in the Mod.   http://www.sas1946.com/main/index.php/topic,23327.msg237787.html#msg237787

I bet your F-4 is going to be The Bomb, cant wait. :)
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: karla on April 27, 2013, 02:17:40 AM
@ Bravo - I checked and I already had !SAS_Engine_Mod_4101m_v26 installed.

I did a few tests with F-4E, F6F, F4U, Swordfish, SeaFury which were all skating around. Later on I realised that it was WIND. I often add it into my missions and this time it was blowing gale force 7 (15 mps) and I'd turned the 30 kts (57 kph) carrier perpendicular to the wind - some combination. Next time, I'll lessen the wind to a breeze to make it a breeze for me. Thanks anyway.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: SAS~GJE52 on May 08, 2013, 08:54:24 AM
It is normal in RL for carriers to turn into wind during fixed wing flying ops, so that the wind is directly over the bow. Any cross wind (even a steady breeze) causes unpredictable effects with the huge slab of the island.

G;
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: BravoFxTrt on June 21, 2013, 07:07:24 PM
These all work in 4.12!
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: bigdalcio on July 01, 2013, 01:56:47 AM
help ..
I installed this package but the catapults do not work ..
someone can help me?
thanks
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: SAS~Malone on July 08, 2013, 02:59:41 AM
did you install the Engine Mod 2.6, which is necessary for catapults to work?
it is all explained, with links, in the first post.....
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: trulahn on August 08, 2013, 04:56:49 AM
Can any of these models be exported into a format that can be printed by online 3D printing services?
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: SAS~GJE52 on August 08, 2013, 05:48:35 AM
Quote
Can any of these models be exported into a format that can be printed by online 3D printing services?

Not in this format, no.

G;
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: Jenato on September 26, 2013, 10:26:51 AM
Is this Mod compatible with Jet War 1.32? I had this Mod installed before in plain DBW 1.71 (which has JEtWar 1.2 included) and it worked perfectly. In JetWar 1.32 I get a 70% CTD whatever I try. Can anybody help me out with this one?  :(

Greetings

Jenato
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: Jenato on September 26, 2013, 01:13:58 PM
Don't bother! Installing CY6_Infantry and VietnamArmor in JetWar 1.32 can be tricky! Its worth it though.  :-[ Got messed up with chief.ini and stationary.ini...Nothing to do with the compatibility of this magnificent mod. :D

Greetings

Jenato
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: steven197106 on December 16, 2013, 02:36:51 PM
Has anybody got this to work in 4.12
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (both 4.11 / 4.10)
Post by: sphantom on December 16, 2013, 03:06:05 PM
yup and the ext. mod too
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: bergkamp on February 23, 2014, 04:30:20 AM
I have posted this problem in tech help and did not receive a reply, so apologies if I put it in the wrong section. I have loaded mod UssEssexCV's angled deck carriers (plus ship extensions) into Modact for v4.11.1m and Modact 5.30 for v4.12.2. All carriers show up in FMB object viewer for v4.11 but in Modact 5.30 for 4.12 all carriers show in FMB object viewer except for USS Essex CV9 1960, showing the following error log:

Code: [Select]
Can't open file '3do/Ships/USSEssexCV9_1960/Stack1.msh'
[12:26:53 PM] WARNING: object '3do/Ships/USSEssexCV9_1960/Stack1.msh' of class 'SkinTL' not loaded
[12:26:53 PM] INTERNAL ERROR: MeshObj: Can't load mesh 3do/Ships/USSEssexCV9_1960/Stack1.msh
[12:26:53 PM] WARNING: object '3do/Ships/USSEssexCV9_1960/Hier.him' of class 'HIM' not loaded
[12:26:53 PM] INTERNAL ERROR: HierMeshObj: Can't load HIM 3do/Ships/USSEssexCV9_1960/Hier.him
[12:26:53 PM] INTERNAL ERROR: HierMeshObj: Can't load HIM 3do/Ships/USSEssexCV9_1960/Hier.him
[12:26:53 PM]
[12:26:53 PM] java.lang.RuntimeException: INTERNAL ERROR: HierMeshObj: Can't load HIM 3do/Ships/USSEssexCV9_1960/Hier.him
[12:26:53 PM]
[12:26:53 PM] at com.maddox.il2.engine.HierMesh.Load(Native Method)
[12:26:53 PM] at com.maddox.il2.engine.HierMesh.<init>(HierMesh.java:596)
[12:26:53 PM] at com.maddox.il2.engine.ActorHMesh.setMesh(ActorHMesh.java:89)
[12:26:53 PM] at com.maddox.il2.engine.ActorHMesh.<init>(ActorHMesh.java:111)
[12:26:53 PM] at com.maddox.il2.objects.ActorSimpleHMesh.<init>(ActorSimpleHMesh.java:26)
[12:26:53 PM] at com.maddox.il2.builder.PathChief.setUnits(PathChief.java:249)
[12:26:53 PM] at com.maddox.il2.builder.PathChief.<init>(PathChief.java:290)
[12:26:53 PM] at com.maddox.il2.builder.PlMisChief.insert(PlMisChief.java:527)
[12:26:53 PM] at com.maddox.il2.builder.Plugin.doInsert(Plugin.java:211)
[12:26:53 PM] at com.maddox.il2.builder.Builder.insert(Builder.java:2586)
[12:26:53 PM] at com.maddox.il2.builder.Builder.access$1400(Builder.java:69)
[12:26:53 PM] at com.maddox.il2.builder.Builder$17.begin(Builder.java:1923)
[12:26:53 PM] at com.maddox.rts.HotKeyCmd.start(HotKeyCmd.java:103)
[12:26:53 PM] at com.maddox.rts.HotKeyEnv.startCmd(HotKeyEnv.java:247)
[12:26:53 PM] at com.maddox.rts.HotKeyEnv.keyPress(HotKeyEnv.java:286)
[12:26:53 PM] at com.maddox.rts.HotKey.msgKeyboardKey(HotKey.java:119)
[12:26:53 PM] at com.maddox.rts.MsgKeyboard.invokeListener(MsgKeyboard.java:83)
[12:26:53 PM] at com.maddox.rts.Message._send(Message.java:1217)
[12:26:53 PM] at com.maddox.rts.Message.sendToObject(Message.java:1191)
[12:26:53 PM] at com.maddox.rts.Message.sendToArray(Message.java:1147)
[12:26:53 PM] at com.maddox.rts.Message.sendTo(Message.java:1128)
[12:26:53 PM] at com.maddox.rts.Message.trySend(Message.java:1115)
[12:26:53 PM] at com.maddox.rts.Time.loopMessages(Time.java:180)
[12:26:53 PM] at com.maddox.rts.RTSConf.loopMsgs(RTSConf.java:101)
[12:26:53 PM] at com.maddox.il2.game.MainWin3D.loopApp(MainWin3D.java:131)
[12:26:53 PM] at com.maddox.il2.game.Main.exec(Main.java:449)
[12:26:53 PM] at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
[12:26:53 PM] java.lang.RuntimeException: java.lang.RuntimeException: INTERNAL ERROR: HierMeshObj: Can't load HIM 3do/Ships/USSEssexCV9_1960/Hier.him
[12:26:53 PM]


I have tried a re-install of the mod to no avail. Obviously there is a problem with the Hier file but it only shows up in 4.12. Any help appreciated.

Bergkamp
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: Col. Katafe on March 13, 2014, 07:50:09 PM
Having trouble getting this mod working with 4.12.2.  I was hoping you guys could help me out.

Details below

- Fresh install and updated to 4.12.2 with mega patch
- SAS modact 5.3
- SAS engine 2.7 with western patch
- Jet Era v13

Everything works up to here, but when I install "Essex1960Pack2.02" and make changes to .ini (in particular the chief.ini) I get 70% CTD.

I had this mod working with 4.10.1 for the longest while.

Any thoughts?

Col.Katafe
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: Jenato on March 14, 2014, 09:54:52 AM
Hello Kol Katafe,

At the moment of my previous posting here, I had it working in 4.10.1, without DBW, and I even used the CY6_Infantry and VietnamArmor Mod! It is only very recently I changed to 4.12.2 and had, for reasons I still don't understand, many problems with JetWar 1.32. So I am using only a plain 4.12.2 version with very little Mods now.
Really sorry I cannot help you any further. :(

Jenato
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: Col. Katafe on March 15, 2014, 06:11:53 PM
Thanks Jenato, at least I know that I'm not the only one  :'(

I'm going to try a couple of things

1. Fresh install of 4.12.2 with Essex mod only. If that doesn't work...

2. Install 4.12 with Essex mod only

I'll keep ya posted.

Col.Katafe

Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: Col. Katafe on March 15, 2014, 09:21:03 PM
UPDATE

So I went with option #3... :-[ which was to install westerne's French aircraft carrier mod for 4.12.2m which needed ShipExtention2.2

Everything is working now.  I think the missing link was Shipextention mod that was causing the 70% CTD.  My laziness of editing the ship.ini required for ShipExtention was actually the underlying problem. CURSE my Laziness!!!  However, I did not require shipextension mod when I had this all working in 4.10.1.

This may actually fix this Essex mod, but I'm having too much fun right now launching off French aircraft carriers with my American f86 sabre...but who's counting?

Anyways, I hope this helps others should they run into this problem.  And I'd like to thank everyone who made this possible (that is, shooting down migs over wake island in my fury sabre after catapulting off a French CV)

Keep the shiny side up fellas!

Col. Katafe

 
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: Clint Watters on April 18, 2014, 10:03:17 AM
Hello everyone!

First of, thank you for this amazing pack!

I just finished installing this Essex 1960 pack. I tried to install ship pack mod 3 times, I was getting crashes so I just tried to install the essex pack without it and it worked! I used the UP3 ini files for "Ships", but I acctually have DBW 1.71 and use it all the time.

Of course, I'm having a small problem: I don't seem to have any catapult on those carriers, I taxi to the catapult line, set the chocks in, my plane doesn't line up like it should do on regular carriers...
I already have CTO modact5 catapult mod, I also have PAL carrier for UP3 users only. Neither one does anything.
So, it might simply come from that I installed it for UP3 version and using it in DBW might bug the catapult...I don't know

Maybe I can try to install the essex pack again but this time with the "Ship pack" ini files (Even tough I don't have installed it)

I wanted to ask you fellow pilots if you have any idea of resolving this problem, advices perhaps...

Thanks again!

C.W.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: The Radge on April 18, 2014, 10:09:40 AM
Hello! Do you have entries for ships of this pack added in your catapults.ini?
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: Clint Watters on April 18, 2014, 10:18:49 AM
I don't believe so...

How do I do this? what's the exact process?

Thank you for anwsering me so quick  ;D
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: The Radge on April 18, 2014, 10:44:20 AM
In *your Il-2 1946 folder*/#SAS/*sas engine mod folder*/com/maddox/il2/objects folder find Catapults.ini and at the end add information about catapults of this Essex carriers, which you can find in readme or in other txt files (example add_catapults) near the add_chief add_tationary etc...
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: Clint Watters on April 18, 2014, 10:59:13 AM
Okay, I followed your instuctions, I saw that the carriers list in SAS engine MOD catapult file already contains the Essex 1960's pack.
The values are set like so:

[USSRandolphCV15_1957]
dCatapultOffsetX 8.7
dCatapultOffsetY -41
dCatapultYaw   0.5
dCatapultOffsetX2 25.4
dCatapultOffsetY2 -43.5
dCatapultYaw2   0.5
catapultPower     19
catapultPowerJets  25
bSteamCatapult 1

[USSRandolphCV15_1962]
dCatapultOffsetX 8.7
dCatapultOffsetY -41
dCatapultYaw   0.5
dCatapultOffsetX2 25.4
dCatapultOffsetY2 -43.5
dCatapultYaw2   0.5
catapultPower     22
catapultPowerJets  35
bSteamCatapult 1

This was already entered when I tried to use the catapult earlier.
I'd like to say that I also have this "CTO_modact5" that might interfer with "SAS engine mod V2.6"
I don't really know what I should do now.  :'(
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: The Radge on April 18, 2014, 11:11:49 AM
Well... then I really don't know about what happened... :( May be you try again and again taxing as close as you can to the catapults or waiting for more skilled pilots to reply... Sorry...
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: Clint Watters on April 18, 2014, 12:08:45 PM
Problem solved!  ;D  ;D  ;D

I needed to get "AI, Engines, Hotkeys & Carriers Mod v2.5"

Here for those who might have the same problem like I had: http://www.sas1946.com/main/index.php?topic=23327.0

Thank you for your help Radge, I appreciate!  ;)

Take care!

C.W.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: The Radge on April 18, 2014, 12:38:00 PM
Glad to hear that you dealt with it :)

Good luck in future! ;)
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: vla on May 06, 2014, 02:20:05 PM
Hardly was able to deliver these ships :). Understand that Carrier Crew v5 does not work with them. What mod crew wakes to work? Give me please the link. Sorry for English
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: Kartman013 on June 15, 2014, 11:57:03 AM
Hello -

Instruction '7' says to edit my technics_ru.properties and paste in new properties, but I don't have a technics_ru.properties file (I do have this for other nations). Please advise what I should do instead.

Thank you,
K.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: western0221 on June 15, 2014, 12:01:32 PM
Hello -

Instruction '7' says to edit my technics_ru.properties and paste in new properties, but I don't have a technics_ru.properties file (I do have this for other nations). Please advise what I should do instead.

Thank you,
K.

If your version is 4.12.2m + SASModAct5.30 ,
technics_ru.properties file is renamed to technics.properties .
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: Kartman013 on June 15, 2014, 02:50:34 PM
Hi Western - thank you.  I have made the changes to the technics file.

If you don't mind could you please suggest where I have gone wrong elsewhere. My version is indeed  4.12.2m + SASModAct5.30.

I have installed everything as required, including ship extensions. I no longer get crash to desktop, and see the static carrier ship names (with their corresponding years) in the FMB.  However, the models are not showing and when I press 'insert', they do not insert on the map.

I know there's probably one small step I am missing, but I have gone over everything for hours. I have loaded 'ship extensions' and feel it may have something to do with that?

Thanks again -
K.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: western0221 on June 15, 2014, 02:53:05 PM
What does your error log say?
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: Kartman013 on June 15, 2014, 02:54:38 PM
Just edited some bad grammar in the above post.

How do I generate an error log (sorry, I know you must get asked this almost daily).?
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: western0221 on June 15, 2014, 02:58:25 PM
http://www.sas1946.com/main/index.php?topic=13457.0
http://www.sas1946.com/main/index.php?topic=39780.0
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: Kartman013 on June 15, 2014, 03:08:50 PM
Thanks, I have sent some of the log list. If you need more please let me know, but I already see some errors in Java.

Code: [Select]
AutoMounting SFS files from folder SFS_AUTO finished.
INTERNAL ERROR: Str2FloatClamp() - Clamped 75 -> 32 (delta = -43) to Range 0..32
INTERNAL ERROR: Str2FloatClamp() - Clamped 120 -> 60 (delta = -60) to Range 0..60
INTERNAL ERROR: Str2FloatClamp() - Clamped 1024 -> 512 (delta = -512) to Range 1..512
Ship: Value of [USSEssexCV9_1957]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:774)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:11)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:243)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1648)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1579)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:212)
at com.maddox.il2.game.Main.exec(Main.java:432)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSEssexCV9_1957
Ship: Value of [USSEssexCV9_1960]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:774)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:12)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:243)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1648)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1579)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:212)
at com.maddox.il2.game.Main.exec(Main.java:432)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSEssexCV9_1960
Ship: Value of [USSYorktownCV10_1956]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:774)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:13)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:243)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1648)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1579)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:212)
at com.maddox.il2.game.Main.exec(Main.java:432)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSYorktownCV10_1956
Ship: Value of [USSIntrepidCV11_1957]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:774)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:14)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:243)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1648)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1579)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:212)
at com.maddox.il2.game.Main.exec(Main.java:432)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSIntrepidCV11_1957
Ship: Value of [USSIntrepidCV11_1970]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:774)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:15)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:243)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1648)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1579)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:212)
at com.maddox.il2.game.Main.exec(Main.java:432)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSIntrepidCV11_1970
Ship: Value of [USSHornetCV12_1957]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:774)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:16)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:243)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1648)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1579)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:212)
at com.maddox.il2.game.Main.exec(Main.java:432)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSHornetCV12_1957
Ship: Value of [USSHornetCV12_1970]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:774)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:17)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:243)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1648)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1579)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:212)
at com.maddox.il2.game.Main.exec(Main.java:432)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSHornetCV12_1970
Ship: Value of [USSTiconderogaCV14_1962]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:774)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:18)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:243)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1648)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1579)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:212)
at com.maddox.il2.game.Main.exec(Main.java:432)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSTiconderogaCV14_1962
Ship: Value of [USSLexingtonCV16_1958]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:774)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:19)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:243)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1648)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1579)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:212)
at com.maddox.il2.game.Main.exec(Main.java:432)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSLexingtonCV16_1958
Ship: Value of [USSHancockCV19_1957]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:774)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:20)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:243)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1648)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1579)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:212)
at com.maddox.il2.game.Main.exec(Main.java:432)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSHancockCV19_1957
Ship: Value of [USSHancockCV19_1968]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:774)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:21)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:243)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1648)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1579)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:212)
at com.maddox.il2.game.Main.exec(Main.java:432)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSHancockCV19_1968
Ship: Value of [USSRandolphCV15_1957]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:774)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:22)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:243)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1648)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1579)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:212)
at com.maddox.il2.game.Main.exec(Main.java:432)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSRandolphCV15_1957
Ship: Value of [USSRandolphCV15_1962]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:774)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:23)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:243)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1648)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1579)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:212)
at com.maddox.il2.game.Main.exec(Main.java:432)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSRandolphCV15_1962
Ship: Value of [USSKearsargeCV33_1965]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:774)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:24)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:243)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1648)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1579)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:212)
at com.maddox.il2.game.Main.exec(Main.java:432)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSKearsargeCV33_1965
Ship: Value of [USSOriskanyCV34_1965]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:774)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:25)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:243)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1648)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1579)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:212)
at com.maddox.il2.game.Main.exec(Main.java:432)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSOriskanyCV34_1965
Ship: Value of [USSOriskanyCV34_1970]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:774)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:26)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:243)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1648)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1579)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:212)
at com.maddox.il2.game.Main.exec(Main.java:432)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSOriskanyCV34_1970
Ship: Value of [USSShangriLaCV38_1955]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:774)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:27)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:243)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1648)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1579)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:212)
at com.maddox.il2.game.Main.exec(Main.java:432)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSShangriLaCV38_1955
Ship: Value of [USSShangriLaCV38_1970]:<Mesh> not foundCan't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.getS(BigshipGeneric.java:226)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.LoadShipProperties(BigshipGeneric.java:422)
at com.maddox.il2.objects.ships.BigshipGeneric$SPAWN.<init>(BigshipGeneric.java:774)
at com.maddox.il2.objects.ships.ShipEssexs.<clinit>(ShipEssexs.java:28)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadChiefClasses(Main.java:243)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1648)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1579)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:212)
at com.maddox.il2.game.Main.exec(Main.java:432)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.ships.ShipEssexs$USSShangriLaCV38_1970
Plane: Parameter [Mig_15]:<Class> not found
Can't set property
java.lang.RuntimeException: Can't set property
at com.maddox.il2.objects.vehicles.planes.PlaneGeneric$SPAWN.getS(PlaneGeneric.java:1117)
at com.maddox.il2.objects.vehicles.planes.PlaneGeneric$SPAWN.LoadPlaneProperties(PlaneGeneric.java:1143)
at com.maddox.il2.objects.vehicles.planes.PlaneGeneric$SPAWN.<init>(PlaneGeneric.java:1192)
at com.maddox.il2.objects.vehicles.planes.JetEraStatic.<clinit>(JetEraStatic.java:186)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:84)
at com.maddox.rts.Spawn.get_WithSoftClass(Spawn.java:57)
at com.maddox.il2.game.Main.preloadStationaryClasses(Main.java:257)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1650)
at com.maddox.il2.game.Main3D.beginApp(Main3D.java:1579)
at com.maddox.il2.game.MainWin3D.beginApp(MainWin3D.java:212)
at com.maddox.il2.game.Main.exec(Main.java:432)
at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
Problem in spawn: com.maddox.il2.objects.vehicles.planes.JetEraStatic$Mig_15
FM called 'FlightModels/Bf-109E-4.fmd' is being loaded from Alternative File: 'gui/game/buttons'
FM called 'FlightModels/Bf-109E-4.fmd' is being loaded from Alternative File: 'gui/game/buttons'
FM called 'FlightModels/Generic.fmd' is being loaded from Alternative File: 'gui/game/buttons'
FM called 'FlightModels/Generic.fmd' is being loaded from Alternative File:
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: western0221 on June 15, 2014, 03:25:18 PM
That error message seems missing ships.ini entries.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: Kartman013 on June 15, 2014, 07:24:35 PM
Yes! you were right. Somewhere along the way I put ship name values in the ship.ini instead of the ships.ini.

I just landed my first jet on a stationary carrier, and catapulted off it again! I feel like a little boy again playing with his die-cast F4's and landing on them on the coffee table! Thank you so very much, I'm thrilled to bits.  ;D

I've never had a flight sim experience quite like Il2 1946. I'm still very very new to this sim, and my word, it's possibly the most rewarding of all.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: vla on July 10, 2014, 01:13:18 PM
You will make the Jet Blast Deflector for USS Hancock CVA-19 or USS Essex SCB-125 angled deck pack ver2.02 ?
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: juldebmt on November 06, 2014, 04:56:00 PM
Hi

Link is broken on first page for V 2.02 (adrive)

Is it possible to update plz?  ;)
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: western0221 on November 06, 2014, 05:41:32 PM
I update the DL link of 1st post.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: juldebmt on November 06, 2014, 06:08:25 PM
Thanks a lot
Title: an old story, Catapults
Post by: Ccrashh on April 04, 2015, 12:37:27 PM
I have these angled decks installed and they are in the game. Radars spin and everything.. looks great.

But I can't get the cats to work. I've been reading about mod acts, and button files and a whole slew of carrier take off mods that half have links that are dead.

I'm running a vanilla HSFX 7.03 on IL2 4.12.2m

The only mods I have installed are these carriers ,ship extensions, and Auto Diff FM

How can I make the cats work? and where do I find it? And good instructions written so a dope like me can understand.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: western0221 on April 04, 2015, 01:26:36 PM
HSFX7 doesn't have Cat function to make this pack available.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: Ccrashh on April 04, 2015, 01:36:20 PM
Thank you
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: BillyBishop123 on April 17, 2015, 01:50:41 PM
Love this mod,love the era,hats off to the people who take the time and with great talent i might add to give us these great gifts..Thank you.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: oldschoolie on December 31, 2015, 06:17:26 AM
Just discovered and installed this mod. It's great...thank you very much.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: asheshouse on January 20, 2016, 11:56:56 AM
The download link is broken.
Would it be possible to update it.
Thanks.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: SAS~Malone on January 20, 2016, 12:01:50 PM
either it's gone or its been set to private....

edit : i added a mediafire link, bottom of first post. ;)
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10) [4.10] [4.11] [4.12]
Post by: SAS~Gerax on January 20, 2016, 09:11:49 PM
maybe I missed the solution  :-|,
but does anyone have a idea how to get rid of what I encircled in red?


(http://s28.postimg.cc/b4o7mvbcd/BHR_sh.jpg) (http://postimage.org/)
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: SAS~Malone on January 20, 2016, 09:25:22 PM
i have the same issue, Gerhard, and also not aware of any fix.
looks like some shadow 'hooks' are out of place...?
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10) [4.10] [4.11] [4.12]
Post by: SAS~Gerax on January 20, 2016, 09:29:22 PM
but wich ones?  :P
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: SAS~Malone on January 20, 2016, 09:59:28 PM
good question, lol - looking at it, i'd say those shadows aren't even needed - the hull/deck shadow is more than sufficient.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10) [4.10] [4.11] [4.12]
Post by: jaimexandres on November 24, 2017, 11:09:23 PM
Can someone update the link please. Even the mediafire link isn't loading.
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10) [4.10] [4.11] [4.12]
Post by: SAS~Gerax on November 25, 2017, 04:56:34 AM
Can someone update the link please. Even the mediafire link isn't loading.

alternate mediafire link by SAS~Malone at the end of post #1 works OK for me ..
maybe try again?
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: vpmedia on January 28, 2018, 06:19:23 AM
New deck damage textures

https://www.ulozto.net/!Gm1LSVRKSUWv/ussessexcvs-scb125-deck-damage-textures-7z

(https://i.imgur.com/v8xU3XM.jpg)

(https://i.imgur.com/j34pPqJ.jpg)

(https://i.imgur.com/EesFOva.jpg)
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: SAS~Bombsaway on January 28, 2018, 09:55:53 AM
Those look great VP.  :)  Would you consider doing those for our WWII carriers as well?
Title: Re: USS Essex SCB-125 angled deck pack ver2.02 (4.12 / 4.11 / 4.10)
Post by: vpmedia on January 30, 2018, 01:14:34 AM
WW2 carrier damage layers would be a much bigger project since not all carriers have the same mapping and most of them have only 512*512 damage textures. You would have to redo the whole thing in 1024.