Special Aircraft Service

Individual Mods and Packs for IL-2 1946 => Aircraft => UK_Singles => Topic started by: SAS~CirX on December 17, 2009, 11:41:10 AM

Title: Gladiator and SeaGladiator pack for SAS [4.09] [4.10] [4.12]
Post by: SAS~CirX on December 17, 2009, 11:41:10 AM

(https://storebror.it.cx/sas/archive/sasdl/planes/GladiatorPix22.jpg)

Flyable Gladiators & Sea Gladiator with English Cockpit
=====================================

This mod brings you both the Seagladiator by Muas (with Charlie Chap's english cockpit already included) and makes the stock Gladiator I and II flyable with English Cockpits also.

This replaces all previous versions of these mods.

Users of HSFX or UP dont need this.

Additional changes in SAS version : Reticle size increased.

Original Chap notes:

Labelling altered to English & Gauges recalibratd & changed:
Fuel (Gals)
Altimeter (feet) (second hand added for Thousands of feet)
Climb & Dive indicator (feet)
Speedometer (Knots (KIAS)
(The Altimeter is an unusual configuration but does read Ok.)
Temp & pressure gauges do still read in metric.
(Your particular aircraft is obviously a cancelled export!)

Opening canopies for MkI and II were not enabled because of compatibility issues with other communities. Sorry!

Credits:

Muas for Sea Gladiator
Charlie Chap for English cockpit
with some textures from Avala

---

Installation:

Use the latest SAS Buttons
Copy Mods and PaintSchemes folders to your iL-2 root.

If you want the flyable gladiators without the seagladiator:

Install as normal, but dont add the lines below for the seagladiator to any documents.

The following is optional (it wont hurt if you dont do it):
~You can also delete the "paintschemes" folder in the mod,
~and delete the "plane" folder inside the mod in the 3do folder.
~You can also safely delete the following classfiles (but they wont do anything if you leave them in):
0F9CAC50153032F8
6B927F3A7EA0C4B6
86CF922667F9F2AC
97F9D53A5803C486
116158D0EDDAD22A
B61830580CC35154
F4C0460AA50A9D96

---

Insert on air.ini:

SeaGladiatorMkII  air.SEAGLADIATOR2 1                   NOINFO  gb01  DESERT

Insert on planes_ru.properties:

SeaGladiatorMkII     Sea Gladiator, 1940

Insert on weapons_ru.properties:

#####################################################################
# Sea Gladiator Mk.II
#####################################################################
SeaGladiatorMkII.default                Default
SeaGladiatorMkII.none                   Empty

Download Gladiators & Seagladiator Pack (https://storebror.it.cx/sas/archive/sasdl/planes/Gladiators_SAS_Pack_v1.7z)

4.12 compatible version available here: https://www.mediafire.com/download/tbybzl1s7iwm2yq/plane_SeaGladiatorMkII_412.zip
S! To Muas & Charlie

CirX
 :)

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: SAS~Malone on December 17, 2009, 11:47:33 AM

Nice one, thanks gentlemen!  ;D 8)

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: Sandman on December 18, 2009, 03:57:53 PM

Thanks a lot CirX ! (and the others involved of course)

Nice crate and marvelous skins too . . .


greetings  Sandman

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: BravoFxTrt on December 19, 2009, 01:28:46 AM

Had to get them, what a joy to fly.
(http://i163.photobucket.com/albums/t283/BravoFxTrt/1812200915-24-11.jpg)
Thanks CirX

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: ClipWing on December 27, 2009, 11:03:26 PM

Thanks very much CirX for putting these three and CC's great cockpit in one pack/install.

Also thanks to Muas, Charlie Chap, and Avala.

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: Scharnhorst1943 on March 10, 2010, 11:45:33 PM

Um ... I have a question ...

This mod was originally available with opening canopies. I used to have it, but now I don't anymore as I had to do a reinstall a while back.

Getting on to the point ... is there any way I can get a hold of this mod with opening canopies? I understand online compatibility and all, but I am playing offline. And if I am not mistaken, even if I do try and play online it only hurts myself? And even still, What about the offline guys? Offline players can't enjoy the canopies despite the online problem?

Anyway, would be really nice to get the opening canopies back. My dream is that one day every plane will have an opening canopy ... I hate to go backwards ya know?

I guess I just don't understand why the offline players can't have a link to a version with canopies ... I am not trying to impose or anything, just to understand and maybe get the DL :)

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: SAS~CirX on March 11, 2010, 03:43:43 AM

The Seagladiators have opening canopies, the stock ones now, because changing those classes and 3d was a drag for me, and so I didnt do it! The 3d and classes between the seagladdies and the regular ones are not the same.

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: FTC_Obelix on January 12, 2011, 02:31:59 AM

Thanks for that job!!

(http://obelix.bg2.free.fr/Screens/Syldavie/11.01.2011%2021-18-25.jpg)

(http://obelix.bg2.free.fr/Screens/Syldavie/11.01.2011%2021-25-55.jpg)

Any chance to have some opening canopy? Is the bug fixed?

Thanks ;)

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: BP_dFrog on January 12, 2011, 09:58:11 AM

In 4.10 J8A received openable canopy. Gladiators got it in external view. So, this mod needs little update...  ;)

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: FTC_Obelix on January 14, 2011, 06:02:54 AM

Quote from: dFrog on January 12, 2011, 09:58:11 AM

In 4.10 J8A received openable canopy. Gladiators got it in external view. So, this mod needs little update...  ;)

Thanks! ;)

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: kleinnak on May 03, 2011, 03:41:23 AM

Just posted something similar to this over in the 4.101 Swordfish cockpit thread.  A few weeks ago this mod was working for me.  Had to redo windows on my computer and just reinstalled il-2 with 4.101 and SAS Mod-act 3.0.  Installed this mod and now anytime I set the Sea Gladiator to RAF/RN with "Markings On", i get an immediate CTD.  I posted this in the Swordfish (not the Mk II mod, the cockpit only mod thread) thread too because the exact same things happens with that mod.  I can't fly the Swordfish with "Markings On" as the RAF/RN either.  With the Swordfish mod off I can set the AI swordfish to RAF/RN with "Markings On" with no CTD.  This mod obviously I can't test the same way, however, with this mod enabled I CAN fly the regular Gladiators as the RAF/RN with "Markings On".  But for the Sea Gladiator and Swordfish, no dice.  I have tested it over and over again and gone through my mods folder bit by bit trying to find what could be causing conflicts but nothing jumps out so far.  I admit my one change from my last install has been installing the FBDSM pack, but that doesn't list any changes to the Gladiators or Swordfish, so I don't think that's what's causing it.  Any suggestions or anything I'm missing would be helpful if it means i can avoid having to completely reinstall il-2 again...

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: Flying H on May 03, 2011, 01:07:56 PM

classfile conflict? There´s a small tool for checking those around here, can´t remember the name or topic ATM but do a search.

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: Badmuthafunker on May 03, 2011, 01:52:44 PM

Gentlemen,

The Sea Gladiator is currently incompatible with 4.10 & 4.101, But here's the classchecker link:

https://www.sas1946.com/main/index.php/topic,1598.msg17220.html#msg17220

It won't help with the Sea Gladiator, but it's an essential tool anyway.

Hope this helps. :)

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: kleinnak on May 03, 2011, 02:36:02 PM

Thanks Badmuthafunker for the link and for the tip on the incompatibility!  I just find it odd that it works without markings for RAF/RN but WITH markings for other countries.  Ran the checker and found no conflicts related to the Sea Gladiator.  Or the Swordfish, which does the same thing.  guess i'll just wait for a possible patch at... some point... haha.  thanks again!

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: SAS~CirX on May 08, 2011, 06:18:57 PM

it is because this is an 409 mod, the embedded markings mod for it, which only affects in some sides, will crash 4.101

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: kleinnak on May 08, 2011, 07:32:38 PM

Yeah, that's what everyone else has said.  I just installed HSFX5.1, which has them both working, so i don't have a problem with either of these planes anymore.  Which is good.  Now i need to figure out why the He 51C's default loadout isn't working anymore (yes, i have all the 4.101 patches for it).

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: Spitwulf on July 11, 2011, 07:18:39 PM

Hi to all! I'm new here, and this is my first post.  :)

Is strange, but I've deleted the classfile "F4C0460AA50A9D96" in the main mod directory (Gladiator_SeaGladiator_Pack_SAS). This classfile contains informations about markings and paintschemes, but seems to be useless with the new patch (and, obviously, incompatible...). Now the Sea Gladiator seems to work fine with patch 4.101. All markings for RN\RAF works, and also the ones for others nations. No more CTDs.
I'm using SAS ModAct 3.06 with the latest buttons, but without UP3.0 and DBW patch. (for now...).

Hope this helps!

Greetings!
P.s.:sorry for my english...
Spitwulf

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: crazyeddie on July 16, 2011, 08:31:50 AM

Spitwulf

Works for me too, many thanks.

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: Badmuthafunker on July 16, 2011, 10:16:50 AM

Works for me too. I'm buffed to chuggery!  ;D

Nice one Spitwulf. Welcome.

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: duffys tavern on November 20, 2011, 12:12:21 PM

Anybody figured out a way to make the Sea Gladiator work with 4.10.1?

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: MIKEGTJK on November 20, 2011, 03:54:57 PM

Works in UP3 4.10.1

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: cgagan on November 21, 2011, 12:06:20 AM

Hi, I removed the classfile pointed by Spitwulf and I have now the Sea Gladiator fully operational in my SAS Mod Act 3.6 (4.101) setup! Many thanks, Spitwulf! 8)

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: jg1234 on December 09, 2011, 09:45:05 AM

Hi Folks,

First, I want to say thanks for everyone involved with this MOD. It's awesome when we can choose from other planes besides the most popular or most used in the WWII arena.

I would love to only use this MOD on a clean separate install of the game - but have never modded IL2 and have no glue what to do.

I have IL2 1946 patched to version 4.08 on my PC. I only play offline occasionally. I would like to use the Sea Gladiator in Quick Mission Builder and maybe a career if that is possible.

My question is how do I do that? I see in the post something about SAS buttons but was unsure. I basically have no idea how to do this start to finish for this MOD.

My other question would be can I use this with other mods in the future ?

Any help or advice is appreciated and in advance I thank you for your help and patience.

-jg1234

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: cgagan on December 09, 2011, 10:11:40 AM

Click on "SAS essentials" and you'll find all the instructions you want, in order to mod your game ;)

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: jg1234 on December 09, 2011, 10:33:26 AM

Thanks cgagan,

I going to head over and look there now.

-jg1234

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: cgagan on December 09, 2011, 10:41:40 AM

UR welcome! Remember, you have to patch your game all the way from 4.09 to 4.101. Don't install just the latest patch ;)

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: jg1234 on December 09, 2011, 10:52:26 AM

Thanks cgagan,

That's a good point.

-jg1234

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: duffys tavern on December 09, 2011, 11:37:53 AM

Spitwulf, thanx for the tip. Works fine.

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: jg1234 on December 09, 2011, 01:20:04 PM

Oh - I forgot one question - can you folks who have used the MOD tell me if the Sea Gladiator has the landing hook for carrier use ?

I assume it does but just wanted to check.

Thanks again for the help - much appreciated.

-jg1234

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: OberstDanjeje on December 09, 2011, 01:25:32 PM

Quote from: jg1234 on December 09, 2011, 01:20:04 PM

Oh - I forgot one question - can you folks who have used the MOD tell me if the Sea Gladiator has the landing hook for carrier use ?

I assume it does but just wanted to check.

Thanks again for the help - much appreciated.

-jg1234

Yes ;)

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: jg1234 on December 09, 2011, 04:03:37 PM

Awesome,

I am going to try set this up this weekend. Thanks again everyone.

-jg1234

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: danbigel on January 18, 2012, 05:48:05 AM

In the new histomod all gladiator have the complete opening canopy :D

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: ual002 on October 12, 2012, 09:03:37 PM

I'm having trouble trapping on escort carriers.  I nose over after the hook stops me.  Any ideas?  Not having the same problem on other hooked aircraft.

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: Stefan SG on September 01, 2013, 08:46:54 AM

Pls find link for Sea Gladiator Mk.II compatible with 4.12.1/ModAct 5.22

https://www.mediafire.com/download/tbybzl1s7iwm2yq/plane_SeaGladiatorMkII_412.zip

(https://www.sas1946.rocks/images/imageshit/img836/8184/f2qr.jpg) (https://www.sas1946.rocks/images/imageshit/download/836/f2qr.jpg)

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: BravoFxTrt on September 01, 2013, 09:15:51 AM

Thank you Stefan!

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: GUZKNIFE on September 01, 2013, 10:30:26 AM

Stefan!Great job! Aircraft was returned to service. :) Thank you!
Tested in 4.12.1 SAS ModAct 5.22 successfully!

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: cgagan on September 01, 2013, 02:06:38 PM

Many thanks Stefan! 8)

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: stugumby on September 03, 2013, 03:27:52 PM

Hi, cant get these to work, they install game loads and they show in older missions but when trying to fly the mission locks up at 30%. have tried un jsgme the flyables ai pack in case of conflict with gladiators etc. still no luck, any ideas on what may be amiss??

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: Whiskey_Sierra_972 on September 03, 2013, 04:12:05 PM

Try reset your QMB settings....then if the error happen again post your log....

Title: Re: Gladiator and SeaGladiator pack for SAS
Post by: stugumby on September 05, 2013, 10:36:23 AM

heres my init log, hope this is the right one
tried to use sea gladiator, shows in fmb and when selecting plane locks up or when trying in qmb loads to 30% and locks up.

Edit Gerax: next time when posting long lists use the editors code (#) option please.

Code: [Select]

2013-09-05 12:32:39:533 (dinput.dll) : IL-2 Process ID = 000019E8
2013-09-05 12:32:39:533 (dinput.dll) : Starting Watchdog at C:\Games\ubicopy412\IL-2 Sturmovik 1946\bin\selector\basefiles\IL-2 Watchdog.exe
2013-09-05 12:32:39:537 (dinput.dll) : Watchdog process started.
2013-09-05 12:32:39:537 (dinput.dll) : JVM Parameters injector activated
2013-09-05 12:32:39:539 (dinput.dll) : Applying JVM Memory Settings from IL-2 Selector...
2013-09-05 12:32:39:539 (dinput.dll) : Adding JVM Option: -Xms444M
2013-09-05 12:32:39:539 (dinput.dll) : Adding JVM Option: -Xmx444M
2013-09-05 12:32:39:539 (dinput.dll) : Adding JVM Option: -Xss4096K
2013-09-05 12:32:39:539 (dinput.dll) : Adding JVM Option: -XX:PermSize=64M
2013-09-05 12:32:39:539 (dinput.dll) : Adding JVM Option: -XX:MaxPermSize=64M
2013-09-05 12:32:39:540 (dinput.dll) : Checking duplicate JVM Options...
2013-09-05 12:32:39:540 (dinput.dll) : Checking mandatory JVM Options...
2013-09-05 12:32:39:540 (dinput.dll) : Adding JVM Option: -Djava.class.path=.
2013-09-05 12:32:39:540 (dinput.dll) : Adding JVM Option: -Xincgc
2013-09-05 12:32:39:540 (dinput.dll) : Adding JVM Option: -Xverify:none
2013-09-05 12:32:39:540 (dinput.dll) : Adding JVM Option: -Xcomp
2013-09-05 12:32:39:541 (dinput.dll) : Final JVM Option List:
2013-09-05 12:32:39:541 (dinput.dll) : -Xms444M
2013-09-05 12:32:39:541 (dinput.dll) : -Xmx444M
2013-09-05 12:32:39:541 (dinput.dll) : -Xss4096K
2013-09-05 12:32:39:541 (dinput.dll) : -XX:PermSize=64M
2013-09-05 12:32:39:541 (dinput.dll) : -XX:MaxPermSize=64M
2013-09-05 12:32:39:541 (dinput.dll) : -Djava.class.path=.
2013-09-05 12:32:39:541 (dinput.dll) : -Xincgc
2013-09-05 12:32:39:541 (dinput.dll) : -Xverify:none
2013-09-05 12:32:39:542 (dinput.dll) : -Xcomp
2013-09-05 12:32:39:574   (watchdog) : IL-2 Parent Process Handle = 0000005C, ID=000019E8
2013-09-05 12:32:39:575   (watchdog) : IL-2 Watchdog started.
2013-09-05 12:32:39:576   (watchdog) : Message Window Created.
2013-09-05 12:32:39:577 (dinput.dll) : Hooked "SAS_CreateJavaVM" function activated, injecting JVM Parameters
2013-09-05 12:32:39:605 (dinput.dll) : JVM Parameters injected successfully
2013-09-05 12:32:39:612    (wrapper) : ProcessAttach, attached Processes =  1
2013-09-05 12:32:39:612    (wrapper) : Calling GetCommandLineParams()
2013-09-05 12:32:39:613    (wrapper) : Command Line Parameter No. 1 = /f:none
2013-09-05 12:32:39:614    (wrapper) : Command Line Parameter No. 2 = /m:#sas
2013-09-05 12:32:39:614    (wrapper) : Command Line Parameter No. 3 = /lb:il2fb.exe
2013-09-05 12:32:39:614    (wrapper) : MODS Folder = "#sas"
2013-09-05 12:32:39:614    (wrapper) : No FILES Folder set.
2013-09-05 12:32:39:614    (wrapper) : Calling LinkIl2fbExe()
2013-09-05 12:32:39:614    (wrapper) : Trying to link back to C:\Games\ubicopy412\IL-2 Sturmovik 1946\il2fb.exe through LoadLibrary()
2013-09-05 12:32:39:614    (wrapper) : Calling CreateModsFolderList()
2013-09-05 12:32:39:677   (watchdog) : Splash Screen Created.
2013-09-05 12:32:39:738    (wrapper) : Scanning #sas folder took 123 milliseconds.
2013-09-05 12:32:39:738    (wrapper) : Total number of modded files = 12679.
2013-09-05 12:32:39:738    (wrapper) : Calling SortList()
2013-09-05 12:32:39:741    (wrapper) : Sorting modded files list took 2.861 milliseconds.
2013-09-05 12:32:39:741    (wrapper) : Calling RemoveDuplicates()
2013-09-05 12:32:39:742    (wrapper) : Removing 20 Duplicates took 0.173 milliseconds.
2013-09-05 12:32:39:742    (wrapper) : ThreadAttach, attached Threads =  1
2013-09-05 12:32:39:742    (wrapper) : ThreadAttach, attached Threads =  2
2013-09-05 12:32:44:470   (watchdog) : IL-2 Main Window created: "Il2-Sturmovik Forgotten Battles" (MaddoxRtsWndClassW), Handle= 0x001305B0
2013-09-05 12:32:44:472   (watchdog) : Activating IL-2 Main Window (0x001305B0) using SwitchToThisWindow()
2013-09-05 12:32:44:502    (wrapper) : ThreadAttach, attached Threads =  3
2013-09-05 12:32:44:503    (wrapper) : ThreadAttach, attached Threads =  4
2013-09-05 12:32:44:504    (wrapper) : ThreadAttach, attached Threads =  5
2013-09-05 12:32:44:505    (wrapper) : ThreadDetach, attached Threads =  4
2013-09-05 12:32:44:506    (wrapper) : ThreadDetach, attached Threads =  3
2013-09-05 12:32:44:506    (wrapper) : ThreadAttach, attached Threads =  4
2013-09-05 12:32:44:507    (wrapper) : ThreadAttach, attached Threads =  5
2013-09-05 12:32:44:516    (wrapper) : ThreadDetach, attached Threads =  4
2013-09-05 12:32:44:517    (wrapper) : ThreadDetach, attached Threads =  3
2013-09-05 12:32:44:517    (wrapper) : ThreadAttach, attached Threads =  4
2013-09-05 12:32:44:744    (wrapper) : ThreadAttach, attached Threads =  5
2013-09-05 12:32:44:757    (wrapper) : ThreadAttach, attached Threads =  6
2013-09-05 12:32:44:772    (wrapper) : ThreadAttach, attached Threads =  7
2013-09-05 12:32:44:782    (wrapper) : ThreadAttach, attached Threads =  8
2013-09-05 12:32:44:786    (wrapper) : ThreadAttach, attached Threads =  9
2013-09-05 12:32:44:797    (wrapper) : ThreadAttach, attached Threads =  10
2013-09-05 12:32:45:480   (watchdog) : Successfully activated IL-2 Main Window (Handle: 0x001305B0)
2013-09-05 12:32:56:925    (wrapper) : ThreadAttach, attached Threads =  11
2013-09-05 12:32:56:925    (wrapper) : ThreadAttach, attached Threads =  12
2013-09-05 12:32:56:926    (wrapper) : ThreadAttach, attached Threads =  13
2013-09-05 12:33:06:926    (wrapper) : ThreadDetach, attached Threads =  12
2013-09-05 12:33:08:400    (wrapper) : ThreadAttach, attached Threads =  13
2013-09-05 12:33:08:401    (wrapper) : ThreadDetach, attached Threads =  12
2013-09-05 12:33:13:343    (wrapper) : ThreadDetach, attached Threads =  11
2013-09-05 12:33:13:346    (wrapper) : ThreadDetach, attached Threads =  10
2013-09-05 12:33:13:351    (wrapper) : ThreadDetach, attached Threads =  9
2013-09-05 12:33:13:351    (wrapper) : ThreadDetach, attached Threads =  8


Title: Re: Gladiator and SeaGladiator pack for SAS [4.09] [4.10] [4.12]
Post by: Artiglio on February 27, 2017, 05:53:56 AM

SAS Modact 6.3 for IL-2 4.13.3m (https://www.sas1946.com/main/Themes/core/images/post/thumbup.gif)

Title: Re: Gladiator and SeaGladiator pack for SAS [4.09] [4.10] [4.12]
Post by: Marat on December 11, 2018, 01:57:13 PM

Dear friends,

I installed this mod, everything is OK for Sea Gladiator, but MkI & MkII do not appear and are not flyable, so can be used only as AI. I use 4.13.4 version with SAS Modact 6.4. What I should look into first?

Title: Re: Gladiator and SeaGladiator pack for SAS [4.09] [4.10] [4.12]
Post by: PhantomII on December 11, 2018, 08:38:05 PM

Hi Marat, I just tried the 4.10 version and it seems to work ok.

Hope this helps.

Title: Re: Gladiator and SeaGladiator pack for SAS [4.09] [4.10] [4.12]
Post by: Marat on December 12, 2018, 01:00:37 AM

I tried 4.10 version and got CTD. Do not understand why Sea Gladiator works but Mk I & Mk II do not ((

Title: Re: Gladiator and SeaGladiator pack for SAS [4.09] [4.10] [4.12]
Post by: mikojan3 on March 03, 2019, 03:26:00 PM

4.13.4 MODACT 6.4 confirmed worked fine very fine