Special Aircraft Service

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2 3 4 ... 21   Go Down

Author Topic: DBW-1916 error reports  (Read 23929 times)

0 Members and 1 Guest are viewing this topic.

vpmedia

  • Modder
  • member
  • Offline Offline
  • Posts: 5952
  • www.vpmedia.hu/il2
    • VPMEDIA SKINS
DBW-1916 error reports
« on: November 09, 2012, 12:40:18 AM »

Please post your DBW-1916 error reports here.

Thank you!

Install the 'instant log mod' and post your log file:
http://www.sas1946.com/main/index.php/topic,19308.0.html

<Gunny>

  • member
  • Offline Offline
  • Posts: 1032
Re: DBW-1916 error reports
« Reply #1 on: November 09, 2012, 09:00:58 AM »

I'm hoping that some one can help.
I down loaded the correct DBW-1.71 in order to install the DBW-1916 update.
I installed the DBW-1.71 and it works fine the DBW-1916 that come with that install
also works.

I disabled the DBW-1916 that come with the DBW-1.71 by placing [ - ] front of the name.
I then installed the update DBW-1916 in the main game folder and it CTD @ 70%.

I went back and reinstall the game from the disk and  the DBW-1.71.
All works.

I have down loaded the update 4 to 6 times and reinstalled over and over.
Its always the same CTD @ 70%.

It was suggested to try  a splitter and join part 1 and part 2 of the update which I did.
Still the same.

If you have any idea as to how and fix this please post.

Thanks for your  Help.

Logged

WWHappy

  • member
  • Offline Offline
  • Posts: 165
    • Wing Walkers [Virtual] Combat Squadron
Re: DBW-1916 error reports
« Reply #2 on: November 09, 2012, 10:43:54 AM »

I don't know if this will help you but this is my working 1916 folder. Download it to a folder of you chose then unzip it. Just comment out your existing DWB_1916 folder and copy this one to you game folder.http://www.mediafire.com/download.php?kbmom2883kohknb   Good luck i think you will really enjoy flying the sky's of the great war.
Logged

<Gunny>

  • member
  • Offline Offline
  • Posts: 1032
Re: DBW-1916 error reports
« Reply #3 on: November 09, 2012, 10:50:26 AM »

Thank you Happy.
I was hoping for some thing like this.
I know the WW guys from Red Baron 3D. :)

Thank you for going to the trouble of this.
It works like a dream.  Happy Happy   :)

~S~
Logged

WWHappy

  • member
  • Offline Offline
  • Posts: 165
    • Wing Walkers [Virtual] Combat Squadron
Re: DBW-1916 error reports
« Reply #4 on: November 09, 2012, 07:11:44 PM »

No trouble Bud :) I am enjoying this mod more then any that I have. Takes this old man back to the good old days of Wooden Planes and Iron Men.
Logged

<Gunny>

  • member
  • Offline Offline
  • Posts: 1032
Re: DBW-1916 error reports
« Reply #5 on: November 11, 2012, 04:13:04 PM »

I have a problem with FMB.
It works fine with stock game and UP-3.
When I place home base on the map with Aircraft all looks good. Somme and Somme 2
Mission file shows spawn points and all objects I placed on the map.
missions\net\dogfight this is the location I save my missions.

When I go to the map and arming screen I can not choose a base.
In fact in one test mission I placed 3 bases and only one showed.

Thanks for any help.
Logged

Dinga

  • member
  • Offline Offline
  • Posts: 187
Re: DBW-1916 error reports
« Reply #6 on: November 11, 2012, 10:39:29 PM »

When I look at my wing from cockpit view, the Struts do  show up properly.I mean where they connect to the lower wing section,the strut is not there,only the bit 2/3rds down from the upper wing is visible.The bracing wires are not looking correct also from inside looking out of the cockpit.This happens with The Sopwith Camel .The Sopwith Snipe is really bad from Cockpit view, every part of the wing is out of alignment.
Logged

dietz

  • Supporter
  • member
  • Offline Offline
  • Posts: 747
  • " Keep watching the skies...."
    • Art of James Dietz
Re: DBW-1916 error reports
« Reply #7 on: November 12, 2012, 09:47:41 AM »

This may have been posted elsewhere, so please forgive me if so:am not getting part two to properly download-at least I cannot unzip it in the usual way.Part one & Patch have come in fine,but in trying to unzip part 2 I get an "cannot open file as an archive "message.In properties it says it opens with  "microsoft shell commer..." I'm a PC lightweight so I no idea what that is or what to try after all the usual suspects.Can you help - otherwise Ihave to go back to the ealier DBW version? Many thanks. :-X
Logged

mojojojo

  • the only guy who uses the wildcat in multiplayer
  • member
  • Offline Offline
  • Posts: 1350
Re: DBW-1916 error reports
« Reply #8 on: November 12, 2012, 09:57:52 AM »

When I look at my wing from cockpit view, the Struts do  show up properly.I mean where they connect to the lower wing section,the strut is not there,only the bit 2/3rds down from the upper wing is visible.The bracing wires are not looking correct also from inside looking out of the cockpit.This happens with The Sopwith Camel .The Sopwith Snipe is really bad from Cockpit view, every part of the wing is out of alignment.
this is a thread for bugs, not for criticizing cockpits :(
please understand that many wwI planes are unfinished.
Logged
i7 4790K quad core 4.4GHz/8GB DDR3-1600/ASUS Z87-A/ EVGA GTX 970 4GB/128GB A-Data SSD+1TB HDD/EVGA 650w 80+ gold PSU/ NZXT Source 530 gaming case

<Gunny>

  • member
  • Offline Offline
  • Posts: 1032
Re: DBW-1916 error reports
« Reply #9 on: November 12, 2012, 10:37:55 AM »

Dietz are you using 7 zip? if not try that.
can be found at this link:
http://download.cnet.com/1770-20_4-0.html?query=7+zip&platformSelect=Windows&tag=srch%3Ba&searchtype=downloads&filterName=platform%3DWindows&filter=platform%3DWindows

Place parts #1 and parts #2 in a holding folder. Then unzip Part #1 it should also unzip part #2.
Place the unzipped folder in your main game folder. RENAME the old #DBW1916 by placing a  - in front of the name.

I have the same problem as you and still can't open it.:(
Please post as to how it goes.
For a heads up my game CTD @ 70%.Still dont know the cause.
Logged

dietz

  • Supporter
  • member
  • Offline Offline
  • Posts: 747
  • " Keep watching the skies...."
    • Art of James Dietz
Re: DBW-1916 error reports
« Reply #10 on: November 12, 2012, 10:59:59 AM »

Dietz are you using 7 zip? if not try that.
can be found at this link:
http://download.cnet.com/1770-20_4-0.html?query=7+zip&platformSelect=Windows&tag=srch%3Ba&searchtype=downloads&filterName=platform%3DWindows&filter=platform%3DWindows

Place parts #1 and parts #2 in a holding folder. Then unzip Part #1 it should also unzip part #2.
Place the unzipped folder in your main game folder. RENAME the old #DBW1916 by placing a  - in front of the name.

I have the same problem as you and still can't open it.:(
Please post as to how it goes.
Of course - many thanks!
Just givimg it a try-Using 7zip, I'm extracting it all in the same folder -it seems to be working.Will let you know. ;)
Logged

dietz

  • Supporter
  • member
  • Offline Offline
  • Posts: 747
  • " Keep watching the skies...."
    • Art of James Dietz
Re: DBW-1916 error reports
« Reply #11 on: November 12, 2012, 11:40:13 AM »

-Had to remove the abortive install  of the DBW1916  folder of yesterday, than I gave it another try at install of extracted of files.I just tested it & it did start , so on first blush all is well.Thanks again.
Logged
Pages: [1] 2 3 4 ... 21   Go Up
 

Page created in 0.031 seconds with 25 queries.