Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[vonofterdingen]

Blackshark, what game version are you using? Note this of intended for DBW but may work with your install. If you are using BAT, have you tried the alternate graphics dlls.

And finally, please post your log.lst file.

read here how to get a log:
https://www.sas1946.com/main/index.php/topic,13457.0.html

Keep in mind the part in RED!

More info on this:

read here what and how to post it:
https://www.sas1946.com/main/index.php/topic,39780.0.html

[blackshark]

I am using DBW and I applied all the mods requested by DCG Carrier Operations, from TBD1 to maps to Yamato


I hope I understood how to post the log ...

so here there is the complete log:
https://pastebin.com/wi6qJPqv

and with shift+TAB i grabbed the following image ...maybe the problem is witH japan G4M1 bomber ? i see the row on the bottom half with the text "exception ..." ... with G4M1 ? if yes what could I do ?
i did not make any mod on that plane ...




To make a check I started the first mission of each sub-campaign (Torpedo campaigns with all the mod included in the campagn, from TBD1 to maps to ships) and very often I had that picture.

I have that problem with those sub-campaigns:
- Marcus
- Truk
- Saipan
- Kwajalein
- Truk (2 GC tour)
- Saipan (2 GC tour)
- Chichi
 

[vonofterdingen]

This is your problem, I think:

[12:13:03]  Mission error, ID_04: java.lang.RuntimeException: Weapon set 'none' not registered in air.G4M1_11
[12:13:03]  java.lang.RuntimeException: Weapon set 'none' not registered in air.G4M1_11

This will be an easy one to fix. There is an entry of "none" in your payloads.dcg file that the bomber no longer supports.

Do you know how to edit the payloads.dcg file? If so, I would recommend changing "none" to "default"

If you are not familiar with editing that file, we will work something out by email or posting the file here.

[blackshark]

A great thank you, now it works !

I do have some other questions:

- In the payloads file I changed "none" to "default" in all the four columns, it that correct ?

- But after I started "Saipan" campaign I had an explosion on the deck and on the screen i had the same message as in the picture above (about G4M1) so I checked again the "payloads" file and I noticed that in the first and third column I still had "none" !? ... while in the 2nd and fourth I had "default".
Then I changed them again yo "default" and the mission started right ... is it possible that the game changes the "payload" file ?
Should I change to file to "read-only" ?


- Last question, after the "payload" corrected I started the "Marcus" sub-campaign with TBD1 and now the first mission start fine but the AI planes do not take off, they start the engine, the first move to the center of the deck as for take-off, but the never take-off ... they stay there ... is there anything I could do ?

Btw, A great thank you for your help

[vonofterdingen]

You don't want to change all of the payloads to default. Each column tells DCG which bomb load to use for a given mission: ground attack, shipping attack, etc. I am not at my computer right now but later I will delineate the columns. DCG won't change the file. It is tricky to edit though because the lines are so long. When editing turn word wrap off, make sure all colmns align, and use spaces not tabs.

The Marcus case has me scratching my head. Could you post the mission file?

[blackshark]

First of all I made many steps ahead to to play that campaign thank to your help, many sub-campaigns now work 



Coming to the problems, I am sorry but I do not know how to attach a file ...

I post here the "texts" and I hope they can help

originale payloads
https://pastebin.com/7pL8FzzK
at the moment I changed all the "none" to "default" (for G4M1)


mission Marcus (where AI planes do not take-off)
https://pastebin.com/sZJg72Sg
I tried the same mission with the "bomber" campaign and with the "fighter" campaign and with those, the AI planes take-off fine ... so it seem related to TDB-1 (that I installed for this campaign following the instructions). Anyway in the following campaigns TDB1 work fine and AI planes take-off.

log of the mission Marcus
https://pastebin.com/ek9R3KpA




Then I had another problem on the first mission of Truk Lagoon, here I post the picture with some on screen log:



I again noticed, after I exited IL2 following the problem in Truk, that in "payloads" for G4M1 the first and third colums have been re-changed by IL2 to "none" (because I change them to "default" before ...)

here I post the log of that mission:
https://pastebin.com/TacUKCga



All I can say is a great thank you in advance for any help

[vonofterdingen]

Sorry, but my old eyes cannot read the text on your screen capture.

For the payloads file this is the way DCG uses the columns (my comments/recommendations are on the right):

Column 1-[Name of plane from air.ini - air.xxx] 
Column 2-[Ground attack loadout]            Often multiple smaller bombs         
Column 3-[Fighter loadout]                      Additional machine gun, cannon, or ammo if available         
Column 4-[Bomber loadout]                     Larger bombs 
Column 5-[Long range]                            Fighter drop tanks
Column 6-[Anti-shipping]                         Larger bombs or torpedo (we now also have some mines)
Column 7-[?]                                          I don't know what this is-seems to always be default though

So for your Betty bomber, in 4.12 (I do not have a 4.10 install) I have the following (these will probably not work for you due to version differences, I just provide them as examples):

G4M1_11                           
50x15                                   
default                                 
1x5002x250                             
default                                 
1xtype91mod1                           
default

[blackshark]

on the picture, and on the logfile, at the end of the text there is this text:

[9:04:55]   INTERNAL ERROR: Can't open file 'PaintSchemes/Pilots/ja_27.bmp'
[9:04:55]   Mission error, ID_04: java.lang.ArrayIndexOutOfBoundsException
[9:04:55]   java.lang.ArrayIndexOutOfBoundsException
[9:04:55]       at com.maddox.il2.objects.air.Aircraft.weaponsLoad(Aircraft.java:2812)
[9:04:55]       at com.maddox.il2.objects.air.Aircraft.weaponsLoad(Aircraft.java:2795)
[9:04:55]       at com.maddox.il2.objects.air.Aircraft.load(Aircraft.java:2447)
[9:04:55]       at com.maddox.il2.game.Mission.loadAir(Mission.java:1287)
[9:04:55]       at com.maddox.il2.ai.Wing.load(Wing.java:134)
[9:04:55]       at com.maddox.il2.game.Mission.loadWings(Mission.java:1079)
[9:04:55]       at com.maddox.il2.game.Mission._load(Mission.java:455)
[9:04:55]       at com.maddox.il2.game.Mission.access$000(Mission.java:129)
[9:04:55]       at com.maddox.il2.game.Mission$BackgroundLoader.run(Mission.java:405)
[9:04:55]       at com.maddox.rts.BackgroundTask.doRun(BackgroundTask.java:155)
[9:04:55]       at com.maddox.il2.game.MainWin3D.loopApp(MainWin3D.java:108)
[9:04:55]       at com.maddox.il2.game.Main.exec(Main.java:437)
[9:04:55]       at com.maddox.il2.game.GameWin3D.main(GameWin3D.java:235)
[9:05:13]   Mission: campaign/un/DGen_M_TrukUSNrod0/194402170.mis is Playing
[9:05:14]   -------------------------------- MISSION FAILED ---------------------

maybe is it helpful to explain what is the problem ?

[vonofterdingen]

Nothing in this snippet of log means anything to me, I am afraid. I don't understand your last statement.

[blackshark]

here is the complete log of that mission, maybe there are more useful information? unfortunately I still am not able to read the log:

https://pastebin.com/TacUKCga

[vonofterdingen]

The problem appears to be weapon related, but I cannot decipher the error. I am used to the log telling me that a given weapon is not registered for the aircraft, as was the case with the Betty.

In this case, there is an array out of bounds error:

java.lang.ArrayIndexOutOfBoundsException
[9:04:55]       at com.maddox.il2.objects.air.Aircraft.weaponsLoad(Aircraft.java:2812)

I don't know enough java or game code to know what that means. Is a weapon's text string too long? I just do not know. Maybe a more knowledgeable person will comment.

[tomoose]

Will this work in HSFX?