Hello Benito
Thank you to have brought me in another dimension with your 3D app.
Many many thanks.
I am running DBW171 on Windows 7 -64 bit.
VGA MSI ATI 6970 Lightning 2Gb-940Hz.
Monitor Samsung SyncMaster SA950 60-120Hz 3D.Full HD.
My main concern with your 00_PAL-Stereo 3D v5 Final version Pack (TrackIR 6DOF, EcranWide & ScreenShots) ( that I installed "by the book ") is that when using my Track IR 6DOF , I can only look to right and left and up and down ( I loose my 6 DOF ).
Moreover I can not have my wide screen .
So I tried your 00_PAL-Stereo 3D v7 RC-4.101 from 15.04.2012.
I also installed it "by the book" and put the DT.dll in my Il-2 root folder.
With this pack I experience a game crash when my TrackIR is enabled.
Without TrackIR enabled I have the same results as with 00_PAL-Stereo 3D v5 Final version.
The stereo effect is fantastic but I would like not to pay the high price for it , I mean loosing my ecran wide and my 6DOF Track IR use .
Here follows my conf.ini extract as well as a listing of my activated mod.
[Render_OpenGL]
TexQual=3
TexMipFilter=3 // Must be 2 for Hi Res (ATI ONLY )
TexCompress=0 // 2
TexFlags.UseDither=1
TexFlags.UseAlpha=0
TexFlags.UseIndex=0
TexFlags.PolygonStipple=0
TexFlags.UseClampedSprites=0
TexFlags.DrawLandByTriangles=1
TexFlags.UseVertexArrays=0
TexFlags.DisableAPIExtensions=0
TexFlags.ARBMultitextureExt=1
TexFlags.TexEnvCombineExt=1
TexFlags.SecondaryColorExt=0 // 1
TexFlags.VertexArrayExt=1
TexFlags.ClipHintExt=0
TexFlags.UsePaletteExt=0
TexFlags.TexAnisotropicExt=1
TexFlags.TexCompressARBExt=0 // 1
TexFlags.TexEnvCombine4NV=0 // 1
TexFlags.TexEnvCombineDot3=1
TexFlags.DepthClampNV=0 // 1
TexFlags.SeparateSpecular=1
TexFlags.TextureShaderNV=0 // 1
HardwareShaders=1
Shadows=1
Specular=2
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
VisibilityDistance=3
Sky=2
Forest=3 // 0
LandShading=3
LandDetails=2
LandGeom=3 // 2
TexLarge=1
TexLandQual=3
TexLandLarge=1
VideoSetupId=10 // 17 // 3
Water=2 // 1
Effects=2
ForceShaders1x=0
PolygonOffsetFactor=-0.15
PolygonOffsetUnits=-3.0
[QMB]
PlaneList=0
[b][Mods][/b]
PAL3DStart=1 // 0-Stereo Disabled - Stock visuals and behavior.
// 1-Stereo Mode A (the one appeared in V4, default, highly optimized, 5%-15% fps improvement, not Synchronized, no Video Capture).
// 2-Stereo Mode B (the original v3 but now WITHOUT FLICKERING, perfectly stable. Synchronized, no fps improvement, Video Capture mode).
// 4-Stereo Mode D (a two combined frames that now has been optimized). Based in Accumulator Buffer, not universal, depends on your card, but it would work in most of them. Synchronized, good for VideoCapture.
PAL3DSeparation=1.5 // INTERNAL VIEW. With higher values, for inside of cockpits it is too much.
PAL3DSeparationExt=25.0 // EXTERNAL VIEW you can set up a Separation of up to 40 without much trouble, and you will see your or the other planes "very very volumetric". Default value is 25.
//PAL3DScrShtDir=MyScreenShots/
//PAL3DScrShtExt=jpg
PAL3D6DOF=1 // NormalMouse version:
// • Roll TrackIR axis enabled (3DOF TrackIR).
// • Mouse move controls normal look around.
// • Hold Left button and drag emulates X,Y TrackIR axis.
// • Hold Right button and drag over the Y mouse axis emulates Z TrackIR axis.
// • Middle mouse button resets the view.
PAL3D6DOFAutoReset=1 // 0 // If this value is 1 when you left the pilot cockpit to an external view or another position, when you come back, the Shifted view of the 6DOF is lost (it resets to the center). The same setting in 0 means no reset until you press the Middle-Button of the mouse.
PAL3DEcranWide=1 // That default value means 4:3 relation monitor. If you want to activate EcranWide support then change that value to 1 and it will activate the embedded modifications to support 16:9 (wide) monitors.
SmokeEffect=1
PALQMBLinesMap=24
PALQMBLinesPl0=24
PALQMBLinesPl1=18
PALQMBLinesPl2=18
PALQMBLinesPl3=17
PALQMBLinesPl4=18
PALQMBLinesPl5=18
PALQMBLinesPl6=24
PALQMBLinesPl7=24
Activated mods#DBW_Tiger_33 Ultimate Sound Mod V3 for DBW
#DBW_MOD_Maps_TIGER_FIX
#DBW_MissionPro Combo by PAL
#DBW_Fixed engine cowlings and props_v.8
#DBW_Fw 190 Night Reticles
#DBW_Fw 190 A-D Flat Canopy
#DBW_Fw-190 Magnetos OFF
High Resolution Texture DLLs
True Color Textures for Dark Blue World.
High Res True Color Sample Custom Skins
00_PAL-Stereo3D
So, could you please help me to recover my wide screen while using your 3D mod , if I ever can recover my 6DOD TrackIR use.
Thank You very much for your help
Sonny Tucson
Author
Topic: Stereo 3D v5 Final version Pack (TrackIR 6DOF, EcranWide & ScreenShots) (Read 23470 times)
