Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[BT~Tarik]

Wait I'll try doing that. Will report back if it works.

[BT~Tarik]

Ok, normal version for DBW works !  I can go to outside view with no problems.

Thanx sanka 

[sanka]

Ok, normal version for DBW works !  I can go to outside view with no problems.

Thanx sanka 

That's what I thought
Then you must have something wrong with your AI mod: are you sure it is activated and working? (There should be a folder called VTD AIMOD BETA in #DBW)

[BT~Tarik]

Yes it is activated.

[slipper]

Sanka

Great mod mate, works brilliantly.

One thing that has always bothered me in il-2 is the inability to 'smooth' pan the view whilst in cockpit view.

I know the game has a default pan and snap modes using the F9 key, but even this pan mode results in the view being arranged in quadrants, so that you are unable to fine tune your view, which is particulary noticeable in zoomed in mode.

There are a couple of external programs like newview and joytokey which let you enable smooth panning, but i have always run into problems getting them to work correctly, would there please be a possibility you may look at including this in your fov mod?

Other than that i would be interested to hear anyone elses workaround for this situation.

regards

slipper

[PA_Willy]

Thank you for this new conf.ini version.

DBW version is working perfectly. But, in HSFX not. FOV resets when you change FOV view by first time and later you don't get it back.

[sanka]

Thank you for this new conf.ini version.

DBW version is working perfectly. But, in HSFX not. FOV resets when you change FOV view by first time and later you don't get it back.

Could you try the DBW AI mod version in HSFX and tell me if it works? I don't have HSFX to test it.

[PA_Willy]

Thank you for this new conf.ini version.

DBW version is working perfectly. But, in HSFX not. FOV resets when you change FOV view by first time and later you don't get it back.

Could you try the DBW AI mod version in HSFX and tell me if it works? I don't have HSFX to test it.

Perfect! It's working with DBW AI version.

Should I expect any disadvantage because using this version in HSFX?

Thanks.

[sanka]

Thank you for this new conf.ini version.

DBW version is working perfectly. But, in HSFX not. FOV resets when you change FOV view by first time and later you don't get it back.

Could you try the DBW AI mod version in HSFX and tell me if it works? I don't have HSFX to test it.

Perfect! It's working with DBW AI version.

Should I expect any disadvantage because using this version in HSFX?

Thanks.

Not at all, the only difference between this version and the standard 4.10/DBW version is the key assignments. I had no HSFX to test the mod so I assumed it had the default key assignments.
I just corrected the first link. Thanks!

[Whacker]

Hi Sanka.  First off a BIG thank you for this mod!  This and Storebror's mod really make the game much more immerse and enjoyable.

I have a request.  I have your mod working with DBW 1.71, and it works great.  The only problem is that I basically need three FOVs to switch between, and two of them are above 90.  I use 60 for aiming, 120 to look at instruments and mid-zoom, and 155 to fly around in normally (I have 3 monitors in eyefinity).  Setting the default FOV for 155 works great which I would equate to "wide screen" as per your instructions (and Storebror's).  However as I said my "normal" FOV is 120, and the highest I can get it to go reliably with your mods installed is 85, which is too far zoomed in.

Simply put, would it be possible to be able to update your mod so that we could set the FOV values associated with "zoomed/gunsight view", "normal view", and "wide view" through conf.ini?  Also, I hope I'm not getting the functionality of your mod messed up with Storebror's, but if I am then should I likewise make a request in his mod's thread instead or as well?  Apologies if I am.

Thanks!

[ghost5229]

This mod seems great, cant wait to get it downloaded!

[Blaubaer]

I can't get it working with HSFX 6. Can we hope for an adjustment?

Regards,
der Blaubär