Topic: New toTFM - all good until #11 - 20% CTD (Fixed) (Read 1516 times)

gn728 · « **on:** September 01, 2014, 03:58:19 PM »

Greetings - I created a vanilla IL246 4.12.2m/modact 5.30. I've been installing the TFM mod pacs one at a time, in order, testing each one before moving to the next. No other SAS mods are enabled - only TFM pacs. Everything was fine until #11_Air_Extra. it causes a 20% CTD during load. Remove it and all is good. I re - downloaded from media fire but still no go. I understand most 20% crashes are classfile issues? Is there another site for this file I could try? Any help/advice would be much appreciated.

JG7_X_Man · « **Reply #1 on:** September 01, 2014, 08:05:40 PM »

This isn't a known issue which means I will classify this as a user error. Make sure your prior installations are installed in the correct order and correctly.

gn728 · « **Reply #2 on:** September 01, 2014, 08:31:38 PM »

Yes, - 1 through 10, in order, each tested individually before moving to the next - number 11 installed identically as 1-10- load lockup at 20%

'MadDog' · « **Reply #3 on:** September 01, 2014, 11:54:40 PM »

You said that no other SAS mods are installed. Did you install the AI Flyables and then activate it through JSGME?

gn728 · « **Reply #4 on:** September 02, 2014, 12:27:44 AM »

I did - but sent them back over to the available side - not activated - to continue adding TFM's only in the proper order

gn728 · « **Reply #5 on:** September 02, 2014, 01:25:57 AM »

OK - so adding AI Flyables back into the activated group and the 20% crash goes away - and all the components of TFM #11 are present and accounted for. Weird part is 1-10 installed and ran without any other mods activated - is AI Flyables supposed to be on for TFM proper function?