Special Aircraft Service

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Bf-109 B,C&D canopy issues with DBW 1.71  (Read 1580 times)

0 Members and 1 Guest are viewing this topic.

alexandre4442

  • Modder
  • member
  • Offline Offline
  • Posts: 126
Bf-109 B,C&D canopy issues with DBW 1.71
« on: January 08, 2014, 10:30:11 AM »

Hi all,

I recently reinstalled il2 (UP3 RC4 DBW 1.71) and I discovered 2 issues with the early Bf-109s. Strangely enough I didn't noticed them before. Anyway here they are :

The canopy seems misplaced (there is a gap near the rear and the skin doesn't match well on the top), and only with DBW, with UP3 it's fitting well. I have tried different hier and blister1_D0 "tweaks" but to no avail (mostly "blue screens" when trying to load a mission in the FMB)



Any advice will be truly welcome

Thanks in advance

EDIT : I finally modified the hier.him so that it reads like this now and it did the trick

[Blister1_D0]
Mesh Blister1_D0
Parent CF_D0
Separable
Attaching 0 -1 0 1.01 0 0 0 0 1 1.065 0.326 0.409


Logged
This is not a Signature

BravoFxTrt

  • "BIGFOOT"
  • Modder
  • member
  • Offline Offline
  • Posts: 13433
  • Flying Ass Clown #13
Re: Bf-109 B,C&D canopy issues with DBW 1.71
« Reply #1 on: January 18, 2014, 05:47:09 PM »

I confirm, your eddit has corrected all 4 Early 109's. Thanks Alex.
Logged
MSI R9 280X 6GB x2/Crossfire /ASUS M5A99FX PRO R2.0 Mobo/AMD FX 4170 Bulldozer 4core CPU/RAM Kingston HyperX FURY 16GB/ Corsair RM 1000WATT PSU/Windows 10 Enterprise 64bit
Pages: [1]   Go Up
 

Page created in 0.076 seconds with 24 queries.